Gold Precision Pro

Gold Precision Pro is an intraday Expert Advisor for spot gold CFDs in MetaTrader 5. It waits for a trading day whose high is lower and low is higher than the day before it. The next session, a five-minute candle must close outside that narrower range before the EA can enter.

Choose the entry direction

  • Follow breakout is the default. A close above the range triggers a buy. A close below it triggers a sell.
  • Always buy opens a buy after either boundary is crossed and the candle closes outside. It still requires the same setup. For example, a close below yesterday's low can trigger a buy in this mode.

Both modes use at most one signal per session. With the default time shift, the last eligible five-minute candle starts at 17:50. The initial stop is half the previous day's range from entry. A position still open at 20:00 is scheduled to close on the first available quote. There is no fixed take-profit.

Risk and order handling

The EA sizes each position from account equity, stop distance and the risk multiplier. At the default multiplier of 1.00, the base risk is 0.85% of equity. From 60 broker points of spread, it halves that sizing budget. A spread above 90 points or above 24% of the relevant average true range blocks the entry. The EA also skips a trade if the broker's minimum volume exceeds the budget.

Set a balance reference for the account protections, or leave it at zero to use the balance at startup. A separate switch uses the daily starting balance as the reference. Restarting the EA resets the daily equity and end-of-day peak references. The EA checks projected drawdown, available margin, broker volume limits and the stop level before sending an order. Gaps and slippage can increase the realized loss beyond the planned risk.

Using the EA

Attach one instance to your broker's XAUUSD or equivalent spot gold CFD chart with Bid-based candles. The EA reads its own minute history, so changing the chart timeframe does not change the signal. Each of the two reference days needs at least 1,000 minutes of history. Set the session time shift if your broker uses a different clock.

Turn on Write diagnostic CSV files to inspect signals, trades and reasons for skipped entries in the terminal's MQL5/Files folder. To compare the modes on your own feed, run the same symbol, dates and risk settings twice in the Strategy Tester, changing only Entry direction.

Reading the comparison chart

The first gallery chart shows the simulated account balance of both modes on FTMO-Demo XAUUSD from 1 January 2025 through 20 November 2026. Each run started at 10,000 USD with risk multiplier 1.00 and closed 54 trades. The tests used the MT5 1-minute OHLC model, a 20 ms execution delay and the broker's simulated trading costs. The second image shows how the selected mode handles a close below the previous day's low.

In a separate MT5 real-tick test from 1 January through 20 November 2026, both modes again started at 10,000 USD and closed 18 trades each. Follow breakout gained 1,195.98 USD and Always buy lost 162.60 USD after simulated costs. The comparison depends on the test period, broker feed and execution.


Другие продукты этого автора
Brent Precision Pro is an intraday Expert Advisor for MetaTrader 5, designed for Brent oil CFDs. It combines long reversals, short reversals and break-and-retest entries, with stop-loss management and shared account risk controls. It does not use grid, martingale or averaging down. Strategy Version 1.40 selects its entry logic according to the current spread. The lower-spread regime retains the previous M3 reversal and M5 break-and-retest logic. The higher-spread regime uses M15 signals, additio
# Universal Smart Manual Trade Manager MT5 v1.00 ## What the EA does Universal Smart Manual Trade Manager MT5 is a protective and management Expert Advisor for manually opened trades. It does not open new entries by itself. It only adopts already open positions that pass the selected filters, and can add missing SL/TP, manage break-even, profit lock, ATR trailing, send Telegram notifications, and display status information on the chart. The default setup is intentionally safe: the EA manages
Would your stop loss or take profit have been reached first? Trade Path Journal shows how price moved between the entry and final exit of a closed MetaTrader 5 position. Set virtual exit levels and see which one the broker’s recorded ticks reached first, down to the millisecond. Review a position Attach Trade Path Journal to a separate chart in desktop MT5. It opens your most recent closed position. Use Older and Newer to browse, or set History symbol to review one instrument. Enter SL pts and T
Bid Ask Radar shows which side of your broker’s quote just moved. When Bid rises, did Ask rise too, or did the spread narrow? The desktop MT5 panel compares consecutive Bid and Ask quotes and plots both on the same price scale. Read the panel Attach Bid Ask Radar to a separate chart for the symbol you want to monitor. The turquoise line follows Bid and the amber line follows Ask. The newest quote is on the right. Horizontal spacing follows quote order, so a quiet period and a busy period can cov
What price did your order actually get? Execution Slippage Journal reviews fills on the current chart symbol and measures the difference against a reference you can inspect. Positive points mean a worse fill for the trader. Negative points mean price improvement. Three ways to review a fill Prior quote compares a market buy with Ask and a market sell with Bid. The journal uses the last recorded quote strictly before the broker’s order setup timestamp. Set the maximum quote age in milliseconds. A
Tick History Inspector helps you check a broker’s price history before you use it for an MT5 backtest. Select a broker day and see which minutes contain ticks, where a scheduled quote session is empty, and where the price history reconstructed from ticks differs from the M1 chart. Inspect one day Attach the utility to a separate chart of the symbol you want to inspect. Use Prev day and Next day to move through broker dates, or enter a date in the inputs. A current-day scan covers completed minut
Where are the high and low of your chosen session, and when did price first trade beyond a level and close back inside? Session Range Map draws the completed range on your desktop MetaTrader 5 chart. It can send a text alert to your phone when a new return is confirmed. Set a session by broker time Enter the opening and closing times as HH:MM. The default window runs from 00:00 to 08:00 on the broker clock. A start later than the end defines an overnight window. Choose between 1 and 30 calendar
Order Preflight previews a market buy or sell on the symbol of your MT5 chart. Enter a cash budget and a stop distance to see how many lots fit the plan, how much a fill at that stop would cost, and how much standalone margin MT5 estimates for the entry. Build a preview Attach the utility to a separate desktop chart. Choose Buy or Sell with the side button. Enter your budget in account currency and your stop distance in symbol points. Leave lots at zero for automatic sizing, or enter a fixed vol
How much room is left in your daily loss budget once open positions, swap and fees are counted? Daily Loss Budget displays the amount in your MT5 account currency, using the fixed allowance and broker-time reset you choose. Read the remaining allowance The panel adds the day’s booked trading result and the current floating result to your fixed budget. A positive trading result increases the remaining allowance. The figure can turn negative when losses exceed the budget. The breakdown shows booke
Which strategy contributed to a portfolio’s drawdown? Strategy Contribution Report groups your MetaTrader 5 trading deals by magic number and plots their combined realised P/L. Select one group to see how the curve and maximum drawdown change when its deals are removed. Every retained deal keeps its original volume. Read the report Attach the utility to a separate desktop MT5 chart. The default window covers the most recent 90 days across all symbols. You can set the history length, filter by sy
Broker Feed Compare lets you compare Bid, Ask and spread for the same instrument across two MT5 terminals. Export a quote window at each broker, bring the files together and see how much of the recorded time can be compared at your chosen quote age. Collect the quotes Attach the utility to a chart in desktop MT5. Choose a new export filename in Inputs, then click Export quotes. Repeat on the corresponding instrument at the second broker. Export near the same time so the windows overlap. The defa
Trade Desk Health Monitor brings terminal connection, the age of the last quote and the protection of open positions into one desktop MT5 panel. Attach it to the symbol you want to observe. Set a magic-number filter to focus the position check on one strategy, or retain all positions on the chart symbol. Read the terminal state The panel shows the terminal’s connection and Algo Trading settings alongside the account’s EA trading permission. Quote freshness uses the broker’s published weekly quot
Portfolio Risk Map shows how much of your account’s open risk sits in each symbol or strategy. It reads the current positions, measures the estimated move from the executable quote to each protective stop, and displays the result in the account currency. Inspect the exposure Attach the utility to a separate chart in desktop MetaTrader 5. Choose Symbols , Strategies or Positions . Select a row to see its direction, size, stop coverage and price scenarios. Rows are sorted by priced stop risk. A mu
Find the first fill where two completed MT5 tests differ. Backtest Model Compare reads the Deals tables from two standard Strategy Tester HTML reports. The chart shows matching fills, changed fills, fills found on one side only and fills with several possible matches. Load two runs 1. Save the Strategy Tester report for each completed single test in HTML format. Copy the two .htm or .html files into the terminal’s MQL5/Files folder. A subfolder is fine. 2. Attach the utility to a separate deskto
Write down the test before you see the outcome. Research Protocol Studio keeps a local MT5 record of your hypothesis, development and holdout periods, execution costs, metric, acceptance threshold and minimum sample size. A later assessment compares the observed result with that specific version of the plan. Register a plan Attach the utility to a desktop MT5 chart and open its Inputs. Enter the hypothesis, market and timeframe, two non-overlapping date ranges, a cost assumption and one numerica
Has an EA started entering more often, or facing wider spreads before it trades? EA Drift Monitor compares two adjacent, non-overlapping windows of account history for one magic number on the chart symbol. Compare like with like Set the reference and recent window lengths in broker calendar days. The default compares 28 days with the following seven completed days. Set the exclusive end date to reproduce an older comparison. Pick a magic number, or let the panel select the one associated with th
Practise a trade on a completed broker day, one decision at a time. Trading Day Replay Atlas replaces the price chart with a historical Bid and Ask replay that advances when you press a step button. Start a replay Attach the utility to a separate, clean chart in desktop MetaTrader 5. Choose a historical broker date, start time and lookback. Date zero selects a completed daily bar. The initial view uses recorded quotes preceding the starting cursor. The Bid plot and its price scale are based on t
Mark a level and let MT5 watch for a touch followed by a reclaim. Conditional Entry Assistant records a paper entry only when two separate completed bars satisfy your conditions and the observed spread is within your limit. Build a watch Attach the utility to a desktop MT5 chart. Choose a long or short setup, confirmation timeframe, touch depth, close buffer, maximum spread and active duration. Drag the horizontal line to your level or enter its price in the inputs. Click Arm to freeze the setup
Brent Setup Scanner follows a four-stage price sequence on closed bars. It shows when a sweep has been reclaimed, when a directional candle has displaced price, when a three-bar fair value gap has formed, and when a later retest closes back outside that gap. An arrow marks the confirming bar. Read the sequence For a long candidate, price dips below the lowest low of the preceding range and closes back above that level. A later bullish candle must close above the sweep candle’s high and meet the
Session Exit Agent watches the next trading break for the chart symbol. Use the default Preview mode to see which positions or pending orders are in scope and when the warning and exit windows begin. You can opt in to actual close and cancel requests. Set the scope and time Attach the utility to a separate desktop MT5 chart. Set the exact position magic number. Zero includes manual trades with magic zero. Enter a ticket to narrow the scope to one position or pending order. Pending-order cancella
Фильтр:
Нет отзывов
Ответ на отзыв