Masters Bars is an indicator that plots a line over High and Low of the last Master Bar.
A Master Bar is defined as the decisive candle that exceeds the last decisive candle High-Low range.
This helps traders to see if the chances for trend continuation improve or the chances for a trend reversal increase when Masters Bars range is broken.
Masters Bars include an Alarm function that produces a sound, or even can send an email and/or push notification depending up what you have configured in y
Scaler is a simple technical indicator that plots a rectangle in your chart and tells you how many pips it represent.
Scaler is ideal for traders that use intraday charts to give them the sense of size of a price movement.
There are only two parameters:
Scale Color: Sets the color for the rectangle Font Color: Sets the color for the Scaler's text.Scaler automatically changes the size of the rectangle in order to represent the same proportion of the chart
Scaler automatically adjusts t
This indicator enhances the zoom capabilities of your MT4. It operates in three modes:
1) Setting Price and Zoom Levels for a timeframe
You can set price and zoom levels for each timeframe by selecting the first mode of Zoomer in the properties of the indicator. Then on the chart, set the price levels by dragging the price scale area and the zoom level using the buttons 'Zoom In' or 'Zoom Out'. Then just click on the picture of the open lock. Each time you get back to the timeframe where you h
AllHere is a plug-in for Control-adora that works as information panel.
Its main function is to show you all the Control-adora elements placed in the chart, like the Control-adora's orders or the exit lines.
On the lower left corner, AllHere shows a collection of buttons classified by color (you can set them in the indicator's properties) for several elements used in Control-adora system:
Stop loss indications (stop loss Arrows) Exit lines Above (Above trend lines) Exit lines Below (Below
This indicator calculates directly the value of the dollar index by using the ICE formula to plot the chart, this can help you as reference. You do not need your broker to provide the ICE DX to use this indicator, is a way to have it calculated.
Little discrepancies could be found in the exact value of the candles or time due closing time of the trading floor and the use of decimals, but generally will give you good reference.
You need your broker offers the feed for the following pairs in or
Gann Line indicator is usually used in combination with other Gann’s techniques, some say this is a key point in its success.
The Gann line is interpreted as trend indicator, a series of higher highs and higher lows in it's trend are considered bullish, and a series of lower lows and lower highs are bearish.
As with other technical indicators, for better results Gann Line should be used in combination with other technical concepts as Gann Fan, fibo, swings, supports and resistance, etc.
Gann and other analyst had found a curious correlations between moon phases and change in trends, this is an excellent indicator to test those relation and use what you find useful.
It's very simplistic, can calculate the moon phases using the average moon cycle duration of 29 days 12 hours 44 minutes since the 1970 first full moon registered at January 22nd.
You can also place a known full moon's date, to start the count since the daily opening of that date.
In its window will plot a vertica
ATR on Prices is simply an ATR indicator that plot a line for Resistance and Support using the Average True Range calculation.
You can set the ATR daily periods, to be calculated.
As well you can set the reference price to add and subtract the ATR measure to obtain the ATR Top and ATR Bottom lines, using the Open Price (that is fixed) or the Middle (HL/2) price (that will vary on the day) Or adding the ATR to the daily low and subtracting it from the daily high .
You can use full ATR measure
The Candle Alert indicator recognizes 27 main candlestick patterns.
Indecision Early Reversal Decisive Reversal Others Doji Hammer Bullish Engulfing Bullish Harami Grave Stone Shooting Star Bearish Engulfing Bearish Harami Dragon Fly Pricing Morning Star Bullish Yin Yang Spinning top Dark Cloud Cover Evening Star Bearish Yin Yang Spinning Bo
Simple Stochastic displayed over the prices rather than in a separate window.
The parameters are the very same you can find in the normal Stochastics:
%K period - K's MA %D period - %K MA Slowing - MA applied to obtain a signal Price Field - High+Low divided by 2 or Close Price MA method - simple, exponential, smoothed or linear weighted OverBoughtLevel - draw the overbought reference line at this level OverSoldLevel - draws the oversold reference line at this level
PivotPoints Advanced is the usual pivot point table indicator but with the following enhanced features:
Customizable start hour to calculate daily pivots Alerts you when some level is crossed by the price Pivot Point's timeframe depends on the chart's one: daily below daily charts, weekly on daily charts and monthly above daily charts. Support and Resistance are mutable for those who only use the pivot point line. Keep the cleanest possible screen following the rules below: Show as much
When you combine short term fibos with the long term, your chart get missed up with a lot of lines that hardly make sense at first view.
The best way to improve the clearness and there for the easiness to read your chart is by deleting the fibo levels that you no longer need, for example those levels that the price proved didn’t work as support or resistance.
With Fibo Pro, you can activate or deactivate from a set of fibo levels pre-settled by you, without miss with the default fibo co
This simple script deletes all objects on the chart while keep record of them in order to re draw them when uses the free Objects Show script.
In order to use it, just drag and drop the script over a desired chart when you want to hide (delete) its objects.
Using the combination of Objects Hide and Objects Show scripts you can hide (delete) and later show all the graphical objects in your chart.
This script do not have full support for Gann related objects. As this script removes all objects
This is a free plug-in for Control-adora Expert adviser.
It's main function is to create a Buy Stop arrow on the chart or a Sell Stop arrow when the price crosses above or below a trend line, which will allow Control-adora expert open a new trade when the desired lines will be crossed by the price.
Prefix: Write here the prefix used to identify which trend lines are subject to be watched, value "Trendline" is set by default. Always use On Close Only: When set to true (by defau
Indicator that sends you an alert, email or push notification, when a trend line is crossed. You can set the name(s) of the trend lines to be watched.
It works in 2 different modes:
Closed candle only alert: This will send you the alert and notification if the price breaks above or below a trend line and keeps this way until a new candle is open. Any time the line get crossed: This will send you the alert when the price crosses above or below the trend line, at the moment this happens witho
BigPanel is a plug-in indicator that works exclusively with Control adora Expert Advisor. Its main functions are as follows:
Select two types of button arrangement (horizontal or vertical) Change the buttons' size (from small to big; there are five different sizes in total) Move the buttons' panel around the chart.The arrangement and size can be settled in the indicators properties. To move the buttons' panel, click once over the hand button and move your mouse, the panel will follow
Controladora é um simples e poderoso Expert Advisor que permite o controle de suas negociações com facilidade e precisão.
Você quer parar a sua ordem quando o preço rompe uma linha de tendência? Não se preocupe a Controladora faz isto para você. Você quer tomar o seu lucro quando preço atinge o topo do canal? A Controladora também faz isto para você.
Calcular a proporção exata da sua conta através da abertura de uma ordem, qual o tamanho que representa no caso da diminuição de certo percentual
This is a very simple script that will show you the following info about any symbol in your chart:
Point, digits, spread, stop level, lot size, tick value, tick size, swap long, swap short, starting date (if future contract), expiration date (if future contract), trade allowed, minimum lot size, lot step, maximum lot size, swap type, profit calculation mode, margin calculation mode, initial margin, margin maintenance, margin when hedged, margin required, freeze level.
All this info is extracte
This is an utility created as a technical indicator, that helps you to sync more than one chart with the same pair. Intended as a complement for the MarketPatroller indicator.
Add this indicator to a chart in your profile (this will be used as a master chart) and add a Text Label (T boxed icon) in name of each chart you want to sync with "SyncPair" and the time frame that you want to use in the synchronized chart, and each time you change the pair in the master chart, SyncPair will change the p
This indicator is a plug-in for Controladora Expert Adviser, which allows you to set a specific area, and the Controladora will open a buy or a sell, if the candle closes inside this area.
To make it work in a chart with the Controladora installed, add the Act Inside indicator, then add a rectangle shape into the chart and re-size it to cover only the area where the close of a candle should be in order to send the buy or sell order.
Rename the rectangle as AI and in it's description write buy,
This is a simple indicator that shows you the trade book information (open and pending positions) as percentages.
The reference value to calculate the percentages could be the equity or the balance of the account at the time to open each trade.
The frequency to recalculate also can be selected, the default time is 15 seconds.
To use it just add it to a empty chart (one that not use to analyze) the indicator will delete all elements and will place there the info.
One indicator in one chart is
This is an indicator that works as a plug-in for Control-adora and lets you set buy limit (bl) or sell limit (sl) orders when a trigger level is reached.
This could be useful when you want for example wait until the price breaks support or resistance level and then place a limit order to take advantage of this breakout with a better price.
In order to use this indicator, after placing the indicator on the chart with the Control-adora expert working on it, just add 2 Price Labels or trend lines
Esta é uma versão reduzida, tipo demonstração da publicação Elliott Wave Tool 7Pasos.
As limitações para esta ferramenta Elliott Wave Tool 7Pasos são as seguintes:
Apenas uma conta possível, a ferramenta original tem 1 conta principal e 4 alternativas. Apenas um grau (primário) está disponível, no instrumento original são 12 graus diferentes (6 no micro) a sua disposição. Como apenas um grau está disponível, as funções para atualizar e fazer atualização do grau da onda selecionada es
This is a system consistent of 2 components:
RepliTrades Source: It sends the trades to one or more terminals into the same Computer RepliTrades Trader: It trades the orders sent by RepliTrades Source Please watch the video to learn how it works and use it.
Manage up to 300 trades at same time in each terminal Work with any broker, no matter if uses suffix or prefix in symbols names Replicate pending orders (limits or stops orders) or direct trades (market orders, etc) and it
This simple free script will allow you to show your trade levels on the chart without disclosing their size.
If the chart has no trade levels, the script will plot them using a white horizontal line for the order price, a red one for the stop loss and a blue one for the take profit.
If the chart already shows trade levels, the script will delete them, this will allow avoiding doubling trade level indications.
Every trade level line will contain in its description the ticket of the order.
The indicator that helps you by plotting a reference to easily determine if a scalping trade (or intraday trade) has chances to work out in your favor. One of the most common issues intraday traders have is the lost of reference to know if a movement is big or small due to the scaling of the chart.
With this indicator, you have 3 visual aids on your chart that will help you:
"Screener": Please set the normal stop loss size that you usually apply in your strategy. This will plot a rectangle aft
PositionSizer is an indicator that calculates the number of lots you have to trade if want to risk a set percentage of your account per entry.
To start using it, just add it to a chart. When you want to get a position size you have to establish, just press Shift B on your keyboard to calculate a buy or Shift S to calculate a sell.
Three price arrows will appear on your chart. The blue one represents the point where you want to entry the trade, the red one represents the price to place the Stop
When drawing a trend line or other objects, there is a natural deviation when you place the object from a higher time frame, and then go to watch it in a lower time frame.
PerfectLine is a technical indicator that solves this problem.
Once you touch a line after drawing it, Perfect Line will find the exact spot in the lower time frame available for it's position and then rectifies where it should be.
Perfect Line uses a five pixels pre-established tolerance, if a difference between the line's
This is a technical indicator that works as a plug-in for "Control adora" - the Expert Advisor that helps you to calculate, place and control positions on the chart.
When run on a chart with Control adora EA, this plug-in allows setting entry levels that send orders at contact, while you have StopCloseOnly (OCO in Comments) = 1 settled in Control adora (meaning that without this, the indicator will send the order only when the price Close crosses the arrow level).
This indicator only works if
This is a simple script that places a specific number of lines above and below a given price.
The script lets you set the number of lines, the separation in pips and the color.
If the last parameter is set to false, the script will delete the lines previously placed by it.
BreakEven shows the location of the average price level of the orders in the symbol, to which the indicator is attached.
This information allows you to find the break-even.
The indicator is helpful if you manage several positions, since it allows you to evaluate the performance of your open trades in a glance. If you trade a single order, it allows you to evaluate the effect of your stop loss and the profit or loss during the time your trade is open.
Apart from drawing a break-even lev
AdvancedTradeLog is a system that allows you to keep visual register of what you had in your chart when you take a trade decision. Basically it takes screenshots of your chart each time you open, modify or close a trade. But not just that, AdvancedTradeLog gives you the ability to record the reasons of why you take those decisions. All who had been trading some time knows that keep a track-record of what you decide and why on the market, is a powerful tool to improve your performance.
MultiCrossAlert is an all-in-one solution to get alerts when an indicator or oscillator makes a cross over or under another indicator line. MultiCrossAlert can manage up to 3 line crosses, so it will be helpful for those traders who work with indicators like Moving Average, Bill Williams' Alligator, Ichimoku, etc.
MultiCrossAlert uses the default MetaTrader Alert System but also can send you email notifications or MetaTrader messages if these options are properly configured in the MT4 platform
Free Hand Drawer is a small app that runs as technical indicator and the only thing that does is that it draws continuous line. To activate it, after adding the indicator to the chart just press the D on your keyboard and click where you want to start drawing.
Then every click you make on your chart will be the next nod in your drawing. Use it to draft Elliott waves, or to illustrate ideas on your chart. If you like to draw manually your Gann line you’ll find it handy as well.
Each time yo
CorExTi is a tool that will save you literally hours in your daily routine to draw lines and other graphic elements in your charts.
With a temporary panel discreetly displayed on your screen at the touch of a graphic element as trendline:
Changes the object between 4 favorite line styles (with color, line thickness and style) Cuts trendlines, when are extended, just at the point where you touch them Extends trendlines (active property of Ray) which are not extended Or deact
This is an extension of the previous published DollarIndex with the addition of the function for calculating EURO Index under ICE Formula.
Note that the broker should provide the following data:
For Dollar Index formula, EURUSD, USDJPY, GBPUSD, USDCAD, USDSEK and USDCHF are needed. For Euro Index formula, EURUSD, EURGBP, EURSEK and EURCHF are needed.Now in this version if the SEK (the most uncommon) is not provided, the formula still works, since it adds 0.0001 to its value, but the index w
This indicator works exactly the same as the Boundaries indicator, but here as a free demo that only shows the high and low of the week.
As the Boundaries indicator does, this indicator can work with any symbol. In the Colors tab you can set the color for the Upper and Lower boundaries.
Please review the pics or watch the Boundaries indicator video to better understand how it works.
The Polarized Fractal Efficiency (PFE) was introduced by Hans Hannula in 1994. The indicator was intended to quantify the efficiency of price movement and how trendy or choppy the recent past price action has been.
This is calculated by contrasting the price traveled in the window of study against the total accumulation of movements during the same period of time.
For example: If in 10 days, an active raised from 50 to 100, by increasing it's value 5 points or dollars each session, the effi
This is a simple technical indicator that plots a line in a zigzag fashion using the Bill Williams Fractals indicator as reference.
The mechanics in this indicator is as simple as this: from the latest available fractal in the chart it will trace a line to the next fractal in the opposite side of the price candles and so on until the older possible fractal in the chart is covered.
This technical indicator does not have any input to configure.
Cross Alert is an all-in-one solution for oscillators' cross over and under.
Cross Alert manages the levels for the cross under and cross over separately. Thanks to this you can use it to signal zero cross over (by fixing both levels, above to below, and below to above as zero) or over-bought and over-sold levels (like 70 and 30) as well.
With CrossAlert you can also avoid alerts from one kind of crosses (overs or unders), for example if you are in an uptrend perhaps you do not want to have a
Support Resistance Screener is an indicator that plots for you the direct support and resistance lines finding them by the fractal method. It can display as many supports and resistances as you want and it can plot these lines directly (meaning there is no interference from the fractal until the actual moment) and indirectly (lines that have been interfered by the price previously).
This indicator can plot the supports and resistances in the actual timeframe, or you can choose another one by se
This indicator plots a line that shows the high and low of a higher time frame than the one where you have actually in your chart. For example if you want to see the high and low of the day while you are in 1hour chart, set Boundaries to Daily.
Boundaries have predefined Monthly, Weekly, Daily and Hourly time frames, but if you want to use a different timeframe, just choose the option Other_TF and write on the next field the minutes for your desired timeframe. As MT4 only works beyond M1 with 5
This is a script that is made to work in conjunction with the Objects Hide script
Re-draw again the objects removed in the chart by the Objects Hide script
Just drag and drop over the desired chart when you want to recall the objects deleted by Objects Hide
Using this scripts system you can have the option to hide (remove) all graphical objects in the chart and recover them again later.
Objects Hide is purchasable here in mql5.com find out more about this on this link.
Please watch the dem
This is our newer and improved tool to assist you in the Elliott Wave counting, which represents an improved version of the ElliottWaveTool7pasos idea.
How to Use It
Start counting a new wave
Start by clicking the "<>" button to indicate you want to deselect any previous wave (if applied).
Set the pattern's type that you want to count (if you do not have our free Elliott Wave Font, you will see the letters instead of the pattern's icons in the Type's Section buttons: I=Impulse, D=Dia
Trailing Even is a free complement for the Control adora Expert Adviser.
It adds a trailing stop function and changes the exit level that works as stop loss if some price is reached, let's review how to make it work:
First of all make sure you have the same language selected both in the Control adora Expert and in this indicator.
Change of the exit level that works as stop loss with "BES" and "BEO":
This function needs 2 arrows to work:
1 named BES (stands for Break Even Start) place it
This is a simple tool that adds the timeframe to a text field of an object like a trend line or triangle or Fibo. When you place your mouse over your objects, you can know what timeframes they belong to.
Just add the indicator once to the desired chart Draw a new object, click on it once. The timeframe indication is added to its Text field.Note: if an object contains info in its Text field, no timeframe indication is added.
In order to know the timeframe where the object was
DoubleExit is an Expert Adviser designed for scalpers that will place automatically the stop loss and take profit for every new trade that you open and is without specified exit levels.
Also DoubleExit adds a partial exit level at a fixed (by the user) amount of pips. The user can define also the amount of the original trade (in a percentage) to be closed at the time of the partial exit level is reached. The exit level (represented on the chart with an orange dash-dot-dot line) can be changed e
This is an expert advisor that will trail stop loss of orders selected from the list displayed on the chart.
To make it run, add the expert to an empty chart (please set it on a chart that is not in use for analysis or other trading purposes, you can minimize it when setting a new order trail timed stop loss is not required).
Set the number of pips to trail and the number of minutes to wait for the next stop loss review at the inputs tab in the Expert Properties window.
From the list displaye
This script is to be used with the Market Patroller indicator as a constructor for a specialized list of symbols based in all the available symbols listed in your MT4's Market Watch window.
You can reduce the list depending upon several considerations:
List only some symbols that have some instrument, for example, if your broker have 5 EUR pairs (EURXXX or XXXEUR). Exclude some symbols, for example, if you do not want to trade today GBP related pairs, this will avoid any GBPXXX or XXXGBP sy
Market Patroller is a tool designed as an indicator that allows you to review a list of as many instruments as you want and select those that could give you a trade opportunity.
It combines the possibility to watch in detail each instrument with all the screen space that you need but with the comfort of be capable to monitor later, multiple instruments trough a "hot list" of opportunities at the same time.
Easy to use:
Install the MarketPatroller on one chart (this will be your detailed analy
This is a plug-in indicator for Control-adora that eliminates all the listed labels when a specific price is reached.
Just add the indicator to the same chart where Control-adora runs and place a price label named Killer at the level where you want to trigger the label deletion.
The trigger will be activated when the price goes beyond the Killer label.
In its properties, set the labels you wish to delete separated with comma, replace the default values with the list of your desired labels to
Did youhave to start again the very same analysis because the original one, from whereyou want to modify, just have so much information that no longer fits?
Have youever wanted to change some in one of your charts and make this new line, Fiboor channel automatically appear in some or the rest of your set of charts?
ObjectCopier is the solution to replicate any object into one or several charts atyour desire.
No matterif you changed an object, or made it from the scratch. With Object Copier,re
7pasos Elliott Wave tool is a new way to label your Elliott wave counts not only easily but precisely as well.
One of the keys to successfully count the Elliott waves lies in following the rules and guidelines diligently, and here is where 7pasos Elliott wave tool gives you more support.
With this tool, you can count all the waves from the Primary degree to the micro-sub minuette without the need to release your hand from the mouse.
Just select in the panel the desired degree and your
This is a system consistent of 2 components:
RepliTrades Source: It sends the trades to one or more terminals into the same Computer RepliTrades Trader: It trades the orders sent by RepliTrades Source Please watch the video to learn how it works and use it.
Manage up to 300 trades at same time in each terminal. Work with any broker, no matter if uses suffix or prefix in symbols names. Replicate pending orders (limits or stops orders) or direct trades (market orde
"TradeALot" is a plug-in for the Expert Advisor Control-adora. It allow you to place programmed orders without the need to write the name of the order in the Arrow (like bs, ss, bl, sl, sl1, sl2, etc). Just drag and drop the button for "Programmed Buys" or "Programmed Sells" over the candles-zone at the place where you want to program the order and TradeALot will compare the bid price with the position where you dropped the button and will decide if the order need to be "Stop" or "Limit".
Having a trade about to reach its take profit and suddenly see that it turns around to go strait ahead to your Stop Loss is one of the few things that makes me curse (a lot).
This is why I created AntiCurse.
Just add this Expert Advisor to an empty chart, set a "Trigger" and "Lock" in its properties and you'll have one less reason to curse!
"Trigger" is set in percentage terms, it is the distance between the entry price and the Take Profit that needs to be covered in or
This is a simple but functional Moving Average Cross Alert, just set the parameters for both moving averages and when they cross or are equal you will get an alert. If you configure your terminal to send emails or notifications, the indicator will send you an alert by mail or notification.
You can set the number of iterations for your alerts on the platform and the interval between the alerts. You can use Simple, Exponential, Smoothed or Linear Weighted moving averages. You can apply
This indicator plots a crosshair pointer in all charts of the terminal in the position relative to the active chart.
To activate the Pointer Sync, just press the "+" button that will appear in one of the 4 corners of the chart where the indicator is added.
To deactivate the Pointer Sync, just press the "+" button again. Once Pointer Sync is deactivated, the cross lines will disappear in all charts as well.
You can adjust the color of the pointers and the button, the corner where the button ap
This is a very simple indicator that mixes the Sunday session with the Monday one. This is useful because the Sunday session is a partial session mostly with only Australian and Asian sessions included, so the analysis of the Monday's daily session if mixed with Sunday tends to be more comprehensive.
This indicator plots a candle with the following values:
Open - the Friday's Close or Sunday's Open (depending on your choice). High - the highest High of Sunday and Monday. Low - the lo
This is a very silly script but perhaps you find it useful. It deletes all objects from the chart.
I recommend setting a hot key to call it just by pressing a couple of keys on your keyboard.
To avoid accidental deletion of object, the script will ask you to confirm the action as you won't be available to restore them with "undo" (Ctrl+Z).
This is a technical indicator that put on strategy tester the buttons of the expert adviser "Control adora". Usually when applied the controladora to the strategy tester, the buttons do not appear and therefore its functions (like directly buy, sell, close orders or place stop loss indicator) can't be used. But now you can if have the Manual Backtest indicator.
If you don't have Control adora, you can get it from here.
This indicator get on the chart the buttons that can be of use in strategy
The best way to monitor multiple pairs within little workspace.
RotaGrafico sequentially displays up to 6 different pairs.
It has buttons to set a pair more time for observation.
Normal exposure time adjustable.
Broad exposure time adjustable.
Combine in a profile, Rotagrafico and use the rest of your workspace to the pair that you want to analyze in detail.