Serviço Freelance MQL5: Open close cross expert

Descrição

Termos de Referência

Hello,

I see a good EA on tradingview and would like it translated to an mt5 EA.

EA should mimic trading of the pinescript ea as seen in screen shots

settings should be as those seen on included screen shots as well as tp and sl.

All the setting have to be changeable.

this is the pinescripted ea

// - There are drawing/painting issues in pinescript when working across resolutions/timeframes that I simply

// cannot fix here.. I will not be putting any further effort into developing this until such a time when

// workarounds become available.

// NOTE: Re-painting has been observed infrequently with default settings and seems OK up to Alternate

// multiplier of 5.

// Non-repainting mode is available by setting "Delay Open/Close MA" to 1 or more, but the reported

// performance will drop dramatically.

// R5.1 Changes by JustUncleL

// - Upgraded to Version 3 Pinescript.

// - Added option to select Trade type (Long, Short, Both or None)

// - Added bar colouring work around patch.

// - Small code changes to improve efficiency.

// - NOTE: To enable non-Repainting mode set "Delay Open/Close MA" to 1 or more.

// 9-Aug-2017

// - Correction on SuperSmooth MA calculation.

// R5 Changes by JustUncleL

// - Corrected cross over calculations, sometimes gave false signals.

// - Corrected Alternate Time calculation to allow for Daily,Weekly and Monthly charts.

// - Open Public release.

// R4 Changes By JustUncleL

// - Change the way the Alternate resolution in selected, use a Multiplier of the base Time Frame instead,

// this makes it easy to switch between base time frames.

// - Added TMA and SSMA moving average options. But DEMA is still giving the best results.

// - Using "calc_on_every_tick=false" ensures results between backtesting and real time are similar.

// - Added Option to Disable the coloring of the bars.

// - Updated default settings.

// R3 Changes by JustUncleL:

// - Returned a simplified version of the open/close channel, it shows strength of current trend.

// - Added Target Profit Option.

// - Added option to reduce the number of historical bars, overcomes the too many trades limit error.

// - Simplified the strategy code.

// - Removed Trailing Stop option, not required and in my opion does not work well in Trading View,

// it also gives false and unrealistic performance results in backtesting.

// R2 Changes:

// - Simplified and cleaned up plotting, now just shows a Moving Average derived from the average of open/close.

// - Tried very hard to alleviate painting issues caused by referencing alternate resolution..

// Description:

// - Strategy based around Open-Close Crossovers.

// Setup:

// - I have generally found that setting the strategy resolution to 3-4x that of the chart you are viewing

// tends to yield the best results, regardless of which MA option you may choose (if any) BUT can cause

// a lot of false positives - be aware of this

// - Don't aim for perfection. Just aim to get a reasonably snug fit with the O-C band, with good runs of

// green and red.

// - Option to either use basic open and close series data, or pick your poison with a wide array of MA types.

// - Optional trailing stop for damage mitigation if desired (can be toggled on/off)

// - Positions get taken automagically following a crossover - which is why it's better to set the resolution

// of the script greater than that of your chart, so that the trades get taken sooner rather than later.

// - If you make use of the stops, be sure to take your time tweaking the values. Cutting it too fine

// will cost you profits but keep you safer, while letting them loose could lead to more drawdown than you

// can handle.

// - To enable non-Repainting mode set "Delay Open/Close MA" to 1 or more.

// === INPUTS ===

useRes = input(defval=true, title='Use Alternate Resolution?')

intRes = input(defval=3, title='Multiplier for Alernate Resolution')

stratRes = timeframe.ismonthly ? str.tostring(timeframe.multiplier * intRes, '###M') : timeframe.isweekly ? str.tostring(timeframe.multiplier * intRes, '###W') : timeframe.isdaily ? str.tostring(timeframe.multiplier * intRes, '###D') : timeframe.isintraday ? str.tostring(timeframe.multiplier * intRes, '####') : '60'

basisType = input.string(defval='SMMA', title='MA Type: ', options=['SMA', 'EMA', 'DEMA', 'TEMA', 'WMA', 'VWMA', 'SMMA', 'HullMA', 'LSMA', 'ALMA', 'SSMA', 'TMA'])

basisLen = input.int(defval=8, title='MA Period', minval=1)

offsetSigma = input.int(defval=6, title='Offset for LSMA / Sigma for ALMA', minval=0)

offsetALMA = input.float(defval=0.85, title='Offset for ALMA', minval=0, step=0.01)

scolor = input(false, title='Show coloured Bars to indicate Trend?')

delayOffset = input.int(defval=0, title='Delay Open/Close MA (Forces Non-Repainting)', minval=0, step=1)

tradeType = input.string('BOTH', title='What trades should be taken : ', options=['LONG', 'SHORT', 'BOTH', 'NONE'])

// === /INPUTS ===

// Constants colours that include fully non-transparent option.

green100 = #008000FF

lime100 = #00FF00FF

red100 = #FF0000FF

blue100 = #0000FFFF

aqua100 = #00FFFFFF

darkred100 = #8B0000FF

gray100 = #808080FF

// === BASE FUNCTIONS ===

// Returns MA input selection variant, default to SMA if blank or typo.

variant(type, src, len, offSig, offALMA) =>

v1 = ta.sma(src, len) // Simple

v2 = ta.ema(src, len) // Exponential

v3 = 2 * v2 - ta.ema(v2, len) // Double Exponential

v4 = 3 * (v2 - ta.ema(v2, len)) + ta.ema(ta.ema(v2, len), len) // Triple Exponential

v5 = ta.wma(src, len) // Weighted

v6 = ta.vwma(src, len) // Volume Weighted

v7 = 0.0

sma_1 = ta.sma(src, len) // Smoothed

v7 := na(v7[1]) ? sma_1 : (v7[1] * (len - 1) + src) / len

v8 = ta.wma(2 * ta.wma(src, len / 2) - ta.wma(src, len), math.round(math.sqrt(len))) // Hull

v9 = ta.linreg(src, len, offSig) // Least Squares

v10 = ta.alma(src, len, offALMA, offSig) // Arnaud Legoux

v11 = ta.sma(v1, len) // Triangular (extreme smooth)

// SuperSmoother filter

a1 = math.exp(-1.414 * 3.14159 / len)

b1 = 2 * a1 * math.cos(1.414 * 3.14159 / len)

c2 = b1

c3 = -a1 * a1

c1 = 1 - c2 - c3

v12 = 0.0

v12 := c1 * (src + nz(src[1])) / 2 + c2 * nz(v12[1]) + c3 * nz(v12[2])

type == 'EMA' ? v2 : type == 'DEMA' ? v3 : type == 'TEMA' ? v4 : type == 'WMA' ? v5 : type == 'VWMA' ? v6 : type == 'SMMA' ? v7 : type == 'HullMA' ? v8 : type == 'LSMA' ? v9 : type == 'ALMA' ? v10 : type == 'TMA' ? v11 : type == 'SSMA' ? v12 : v1

// security wrapper for repeat calls

reso(exp, use, res) =>

security_1 = request.security(syminfo.tickerid, res, exp, gaps=barmerge.gaps_off, lookahead=barmerge.lookahead_on)

use ? security_1 : exp

// === /BASE FUNCTIONS ===

// === SERIES SETUP ===

closeSeries = variant(basisType, close[delayOffset], basisLen, offsetSigma, offsetALMA)

openSeries = variant(basisType, open[delayOffset], basisLen, offsetSigma, offsetALMA)

// === /SERIES ===

// === PLOTTING ===

// Get Alternate resolution Series if selected.

closeSeriesAlt = reso(closeSeries, useRes, stratRes)

openSeriesAlt = reso(openSeries, useRes, stratRes)

trendColour = closeSeriesAlt > openSeriesAlt ? color.green : color.red

bcolour = closeSeries > openSeriesAlt ? lime100 : red100

barcolor(scolor ? bcolour : na, title='Bar Colours')

closeP = plot(closeSeriesAlt, title='Close Series', color=trendColour, linewidth=2, style=plot.style_line, transp=20)

openP = plot(openSeriesAlt, title='Open Series', color=trendColour, linewidth=2, style=plot.style_line, transp=20)

fill(closeP, openP, color=trendColour, transp=80)

// === /PLOTTING ===

// === ALERT conditions

xlong = ta.crossover(closeSeriesAlt, openSeriesAlt)

xshort = ta.crossunder(closeSeriesAlt, openSeriesAlt)

longCond = xlong // alternative: longCond[1]? false : (xlong or xlong[1]) and close>closeSeriesAlt and close>=open

shortCond = xshort // alternative: shortCond[1]? false : (xshort or xshort[1]) and close<closeSeriesAlt and close<=open

// === /ALERT conditions.

// === STRATEGY ===

// stop loss

slPoints = input.int(defval=0, title='Initial Stop Loss Points (zero to disable)', minval=0)

tpPoints = input.int(defval=0, title='Initial Target Profit Points (zero for disable)', minval=0)

// Include bar limiting algorithm

ebar = input.int(defval=10000, title='Number of Bars for Back Testing', minval=0)

dummy = input(false, title='- SET to ZERO for Daily or Longer Timeframes')

// Calculate how many mars since last bar

tdays = (timenow - time) / 60000.0 // number of minutes since last bar

tdays := timeframe.ismonthly ? tdays / 1440.0 / 5.0 / 4.3 / timeframe.multiplier : timeframe.isweekly ? tdays / 1440.0 / 5.0 / timeframe.multiplier : timeframe.isdaily ? tdays / 1440.0 / timeframe.multiplier : tdays / timeframe.multiplier // number of bars since last bar

//set up exit parameters

TP = tpPoints > 0 ? tpPoints : na

SL = slPoints > 0 ? slPoints : na

// Make sure we are within the bar range, Set up entries and exit conditions

if (ebar == 0 or tdays <= ebar) and tradeType != 'NONE'

strategy.entry('long', strategy.long, when=longCond == true and tradeType != 'SHORT')

strategy.entry('short', strategy.short, when=shortCond == true and tradeType != 'LONG')

strategy.close('long', when=shortCond == true and tradeType == 'LONG')

strategy.close('short', when=longCond == true and tradeType == 'SHORT')

strategy.exit('XL', from_entry='long', profit=TP, loss=SL)

strategy.exit('XS', from_entry='short', profit=TP, loss=SL)

// === /STRATEGY ===

// eof

Arquivos anexados:

PNG

Screenshot_2023-02-19_at_21-22-32_BTCUSDT_24413.52_a_e0.89y_Anonyme.png

34.8 Kb

PNG

Screenshot_2023-02-19_at_21-22-15_BTCUSDT_24429.82_d_y0.82o_Anonyme.png

83.3 Kb

Respondido

Classificação

(2)

Projetos

Arbitragem

25% / 75%

Expirado

25%

Livre

Classificação

(94)

Projetos

190

66%

Arbitragem

25% / 50%

Expirado

Livre

Classificação

(1)

Projetos

Arbitragem

Expirado

Livre

Pedidos semelhantes

Hy l am looking for someone who can make a robot for me using one minute strategy.i want in every candle to have entry n take profit..you must know how the candles behaviour..to see weather we can enter sell or buy in that candle

Hello, I am looking for an experienced developer to create a MetaTrader 5 (MT5) Expert Advisor (EA) for a prop firm system. The EA must be designed to manage and monitor multiple trading accounts, each with different account sizes and risk parameters. 🎯 Core Requirements: The EA must: Monitor account equity in real-time Apply Daily Drawdown Limit (e.g., 5%) Apply Maximum Drawdown Limit (e.g., 10%) ⚙️ Multi-Account

I am looking for an experienced MQL5 developer to build a fully automated MT5 Expert Advisor based on Session Breaks and Inverted Fair Value Gap (iFVG) logic. The EA must be coded professionally, optimized for backtesting, and written with clean, organized inputs and modular code. Core Strategy The EA should: Mark previous session highs and lows Wait for the current session to break the previous session high or low

IF ANYONE IS INTERESTED IN GETTING ANY KIND OF CUSTOM BOT FOR TRADING I WILL ADD THE STRATEGIES ACCORDING TO YOUR CHOICE MINE BEST BOT IS SCALPING AND HEDGING BOT YOU CAN CONTACT ME FOR SERVICES

Hi, Im looking to purchase or build an EA that can open many trades or big lot size to churn out IB commission, it doesn't have to be super profitable but will need to have the number of trades on going in order to earn IB commission. If you have any EA or strategy that are gearing towards this, let me know and i would be glad to purchase it. If you are applying and asking me to build one from scratch, I need you to

I trade ES futures on the Ninja trader platform. I recently came across an indicator and wanted to check with you if you can build a similar indicator that works on Orenko or Ninja renko charts, and also combines support and resistance untouched. Below is the indicator, which will tell you market chop and to avoid. I want to include a support and resistance bar on the chart when there is no chop please let me know

Project Description: I have a fully working Pine Script for TradingView called MFHA 3-Step Market Structure Strategy V2 . I need it converted into MT5 , with the logic kept as close to the Pine version as possible. What I need: MT5 Indicator Exact oscillator logic Multi-timeframe logic using 4H, 15M, and 1M EMA filter MTF EMA dashboard RSI display Buy and sell visual signals Background state/flash behavior where

I am looking for an experienced MQL5 developer to continue optimization work on an existing Expert Advisor (MQ5 source file available, 2.5MB). Important: This is NOT a project to build a new EA. The task is strictly to refine and improve the current system while keeping the core strategy intact. The EA is already functional and stable. A full code audit and baseline backtesting have already been done, and key

📌 EXPERT ADVISOR (EA) DEVELOPMENT COMPLETE A–Z FINAL REQUIREMENT DOCUMENT (FINAL VERSION) 1. 🔐 SECURITY SYSTEM (MANDATORY) The EA must include strict security checks. If any security condition fails, EA must immediately STOP trading. 1.1 Account Lock #define ALLOWED_ACCOUNT 5047656761 EA must run ONLY on this account number If account does not match: ❌ EA stops trading 🚨 Alert message 📲 Telegram notification to

Hello, and please read everything !!! I am looking for a developer who can recreate a strategy similar to an EA I already have. The EA works well on demo, especially during specific volatility windows (for example DE40 between 09:00 and 10:00 Frankfurt time), but on real accounts it produces constant losses even with IC Markets Raw and VPS close to the broker. 🎯 Objective The goal is to recreate and adapt this

Informações sobre o projeto

Orçamento

40+ USD

Prazo

de 1 para 5 dias

Qualidade dos termos de referência
Qualidade da verificação dos resultados
Disponibilidade e habilidades de comunicação