Alle Aufträge
Regeln
Wie man einen Handelsroboter schnell bestellen kann
Lesen Sie bitte zuerst die Regeln durch
Wie man einen Handelsroboter in MQL5 und MQL4 in Auftrag gibt
Hier ist das Muster einer Anforderungsspezifikation, um einen Roboter zu bestellen
Neuer Aufträge in dieser Kategorie:
30+ USD
80 - 120 USD
100 - 500 USD
30+ USD
30 - 500 USD
Spezifikation
Hello,
I see a good EA on tradingview and would like it translated to an mt5 EA.
EA should mimic trading of the pinescript ea as seen in screen shots
settings should be as those seen on included screen shots as well as tp and sl.
All the setting have to be changeable.
this is the pinescripted ea
// - There are drawing/painting issues in pinescript when working across resolutions/timeframes that I simply
// cannot fix here.. I will not be putting any further effort into developing this until such a time when
// workarounds become available.
// NOTE: Re-painting has been observed infrequently with default settings and seems OK up to Alternate
// multiplier of 5.
// Non-repainting mode is available by setting "Delay Open/Close MA" to 1 or more, but the reported
// performance will drop dramatically.
//
// R5.1 Changes by JustUncleL
// - Upgraded to Version 3 Pinescript.
// - Added option to select Trade type (Long, Short, Both or None)
// - Added bar colouring work around patch.
// - Small code changes to improve efficiency.
// - NOTE: To enable non-Repainting mode set "Delay Open/Close MA" to 1 or more.
// 9-Aug-2017
// - Correction on SuperSmooth MA calculation.
//
// R5 Changes by JustUncleL
// - Corrected cross over calculations, sometimes gave false signals.
// - Corrected Alternate Time calculation to allow for Daily,Weekly and Monthly charts.
// - Open Public release.
// R4 Changes By JustUncleL
// - Change the way the Alternate resolution in selected, use a Multiplier of the base Time Frame instead,
// this makes it easy to switch between base time frames.
// - Added TMA and SSMA moving average options. But DEMA is still giving the best results.
// - Using "calc_on_every_tick=false" ensures results between backtesting and real time are similar.
// - Added Option to Disable the coloring of the bars.
// - Updated default settings.
//
// R3 Changes by JustUncleL:
// - Returned a simplified version of the open/close channel, it shows strength of current trend.
// - Added Target Profit Option.
// - Added option to reduce the number of historical bars, overcomes the too many trades limit error.
// - Simplified the strategy code.
// - Removed Trailing Stop option, not required and in my opion does not work well in Trading View,
// it also gives false and unrealistic performance results in backtesting.
//
// R2 Changes:
// - Simplified and cleaned up plotting, now just shows a Moving Average derived from the average of open/close.
// - Tried very hard to alleviate painting issues caused by referencing alternate resolution..
//
// Description:
// - Strategy based around Open-Close Crossovers.
// Setup:
// - I have generally found that setting the strategy resolution to 3-4x that of the chart you are viewing
// tends to yield the best results, regardless of which MA option you may choose (if any) BUT can cause
// a lot of false positives - be aware of this
// - Don't aim for perfection. Just aim to get a reasonably snug fit with the O-C band, with good runs of
// green and red.
// - Option to either use basic open and close series data, or pick your poison with a wide array of MA types.
// - Optional trailing stop for damage mitigation if desired (can be toggled on/off)
// - Positions get taken automagically following a crossover - which is why it's better to set the resolution
// of the script greater than that of your chart, so that the trades get taken sooner rather than later.
// - If you make use of the stops, be sure to take your time tweaking the values. Cutting it too fine
// will cost you profits but keep you safer, while letting them loose could lead to more drawdown than you
// can handle.
// - To enable non-Repainting mode set "Delay Open/Close MA" to 1 or more.
//
// === INPUTS ===
useRes = input(defval=true, title='Use Alternate Resolution?')
intRes = input(defval=3, title='Multiplier for Alernate Resolution')
stratRes = timeframe.ismonthly ? str.tostring(timeframe.multiplier * intRes, '###M') : timeframe.isweekly ? str.tostring(timeframe.multiplier * intRes, '###W') : timeframe.isdaily ? str.tostring(timeframe.multiplier * intRes, '###D') : timeframe.isintraday ? str.tostring(timeframe.multiplier * intRes, '####') : '60'
basisType = input.string(defval='SMMA', title='MA Type: ', options=['SMA', 'EMA', 'DEMA', 'TEMA', 'WMA', 'VWMA', 'SMMA', 'HullMA', 'LSMA', 'ALMA', 'SSMA', 'TMA'])
basisLen = input.int(defval=8, title='MA Period', minval=1)
offsetSigma = input.int(defval=6, title='Offset for LSMA / Sigma for ALMA', minval=0)
offsetALMA = input.float(defval=0.85, title='Offset for ALMA', minval=0, step=0.01)
scolor = input(false, title='Show coloured Bars to indicate Trend?')
delayOffset = input.int(defval=0, title='Delay Open/Close MA (Forces Non-Repainting)', minval=0, step=1)
tradeType = input.string('BOTH', title='What trades should be taken : ', options=['LONG', 'SHORT', 'BOTH', 'NONE'])
// === /INPUTS ===
// Constants colours that include fully non-transparent option.
green100 = #008000FF
lime100 = #00FF00FF
red100 = #FF0000FF
blue100 = #0000FFFF
aqua100 = #00FFFFFF
darkred100 = #8B0000FF
gray100 = #808080FF
// === BASE FUNCTIONS ===
// Returns MA input selection variant, default to SMA if blank or typo.
variant(type, src, len, offSig, offALMA) =>
v1 = ta.sma(src, len) // Simple
v2 = ta.ema(src, len) // Exponential
v3 = 2 * v2 - ta.ema(v2, len) // Double Exponential
v4 = 3 * (v2 - ta.ema(v2, len)) + ta.ema(ta.ema(v2, len), len) // Triple Exponential
v5 = ta.wma(src, len) // Weighted
v6 = ta.vwma(src, len) // Volume Weighted
v7 = 0.0
sma_1 = ta.sma(src, len) // Smoothed
v7 := na(v7[1]) ? sma_1 : (v7[1] * (len - 1) + src) / len
v8 = ta.wma(2 * ta.wma(src, len / 2) - ta.wma(src, len), math.round(math.sqrt(len))) // Hull
v9 = ta.linreg(src, len, offSig) // Least Squares
v10 = ta.alma(src, len, offALMA, offSig) // Arnaud Legoux
v11 = ta.sma(v1, len) // Triangular (extreme smooth)
// SuperSmoother filter
// © 2013 John F. Ehlers
a1 = math.exp(-1.414 * 3.14159 / len)
b1 = 2 * a1 * math.cos(1.414 * 3.14159 / len)
c2 = b1
c3 = -a1 * a1
c1 = 1 - c2 - c3
v12 = 0.0
v12 := c1 * (src + nz(src[1])) / 2 + c2 * nz(v12[1]) + c3 * nz(v12[2])
type == 'EMA' ? v2 : type == 'DEMA' ? v3 : type == 'TEMA' ? v4 : type == 'WMA' ? v5 : type == 'VWMA' ? v6 : type == 'SMMA' ? v7 : type == 'HullMA' ? v8 : type == 'LSMA' ? v9 : type == 'ALMA' ? v10 : type == 'TMA' ? v11 : type == 'SSMA' ? v12 : v1
// security wrapper for repeat calls
reso(exp, use, res) =>
security_1 = request.security(syminfo.tickerid, res, exp, gaps=barmerge.gaps_off, lookahead=barmerge.lookahead_on)
use ? security_1 : exp
// === /BASE FUNCTIONS ===
// === SERIES SETUP ===
closeSeries = variant(basisType, close[delayOffset], basisLen, offsetSigma, offsetALMA)
openSeries = variant(basisType, open[delayOffset], basisLen, offsetSigma, offsetALMA)
// === /SERIES ===
// === PLOTTING ===
// Get Alternate resolution Series if selected.
closeSeriesAlt = reso(closeSeries, useRes, stratRes)
openSeriesAlt = reso(openSeries, useRes, stratRes)
//
trendColour = closeSeriesAlt > openSeriesAlt ? color.green : color.red
bcolour = closeSeries > openSeriesAlt ? lime100 : red100
barcolor(scolor ? bcolour : na, title='Bar Colours')
closeP = plot(closeSeriesAlt, title='Close Series', color=trendColour, linewidth=2, style=plot.style_line, transp=20)
openP = plot(openSeriesAlt, title='Open Series', color=trendColour, linewidth=2, style=plot.style_line, transp=20)
fill(closeP, openP, color=trendColour, transp=80)
// === /PLOTTING ===
//
//
// === ALERT conditions
xlong = ta.crossover(closeSeriesAlt, openSeriesAlt)
xshort = ta.crossunder(closeSeriesAlt, openSeriesAlt)
longCond = xlong // alternative: longCond[1]? false : (xlong or xlong[1]) and close>closeSeriesAlt and close>=open
shortCond = xshort // alternative: shortCond[1]? false : (xshort or xshort[1]) and close<closeSeriesAlt and close<=open
// === /ALERT conditions.
// === STRATEGY ===
// stop loss
slPoints = input.int(defval=0, title='Initial Stop Loss Points (zero to disable)', minval=0)
tpPoints = input.int(defval=0, title='Initial Target Profit Points (zero for disable)', minval=0)
// Include bar limiting algorithm
ebar = input.int(defval=10000, title='Number of Bars for Back Testing', minval=0)
dummy = input(false, title='- SET to ZERO for Daily or Longer Timeframes')
//
// Calculate how many mars since last bar
tdays = (timenow - time) / 60000.0 // number of minutes since last bar
tdays := timeframe.ismonthly ? tdays / 1440.0 / 5.0 / 4.3 / timeframe.multiplier : timeframe.isweekly ? tdays / 1440.0 / 5.0 / timeframe.multiplier : timeframe.isdaily ? tdays / 1440.0 / timeframe.multiplier : tdays / timeframe.multiplier // number of bars since last bar
//
//set up exit parameters
TP = tpPoints > 0 ? tpPoints : na
SL = slPoints > 0 ? slPoints : na
// Make sure we are within the bar range, Set up entries and exit conditions
if (ebar == 0 or tdays <= ebar) and tradeType != 'NONE'
strategy.entry('long', strategy.long, when=longCond == true and tradeType != 'SHORT')
strategy.entry('short', strategy.short, when=shortCond == true and tradeType != 'LONG')
strategy.close('long', when=shortCond == true and tradeType == 'LONG')
strategy.close('short', when=longCond == true and tradeType == 'SHORT')
strategy.exit('XL', from_entry='long', profit=TP, loss=SL)
strategy.exit('XS', from_entry='short', profit=TP, loss=SL)
// === /STRATEGY ===
// eof
Bewerbungen
1
Bewertung
Projekte
4
0%
Schlichtung
4
25%
/
75%
Frist nicht eingehalten
1
25%
Frei
2
Bewertung
Projekte
190
66%
Schlichtung
8
25%
/
50%
Frist nicht eingehalten
2
1%
Frei
3
Bewertung
Projekte
1
0%
Schlichtung
0
Frist nicht eingehalten
0
Frei
Ähnliche Aufträge
OFFICIAL MQL5 SOFTWARE REQUIREMENTS SPECIFICATION (SRS) Project Name: "Quantum-Shield 2.0" Institutional EA Platform: MetaTrader 5 (MT5) Execution Logic: Fully Automated Instrument: GER40 (DAX) Timeframe: 10 Minutes 1. ARCHITECTURAL MANDATE The Expert Advisor must be a monolithic, high-performance C++ based MQL5 application. No DLLs, no external python bridges. The logic must be entirely self-contained. 2. SIGNAL
Hi All, I am looking for an EA which I have attached the video of. It places a buy stop and sell stop with 250 pips above and below current price for every minute with SL as 300 pips and TP as 500 pips. If any of of them triggers in the minute other will be cancelled, it will not place any pending orders till either of SL or TP is hit and places new set of pending orders the very next minute of SL or TP hit minute
EA Development Request I need an EA with this logic: Detect channels / wedges / triangles Entry: Reversal at channel edge + engulfing candle Breakout of pattern Timeframe: M5 / M15 / M30 (scalping) SL/TP: Fibonacci or fixed pips (settings) Filters: Trend (H1/H4) Spread Time filter Settings: Lot size / risk % Enable/disable modes Max trades Requirements: Must work on XAUUSD No repaint Fast execution Send your proposal
Robot Martingale for XAUUSD
30 - 1000 USD
I need a smart and profitable DCA or Martingale robot that can trade from 10,000 to 1 million cents with good profit. Please send me an ex5 demo so I can test it. It needs to be compatible with 2-digit or 3-digit brokers by default. Source code will be provided upon completion
Specification I need a mt5 Expert advisor EA to manage intraday trades with strict risk management. The EA must -Handle between 5 to 8 clean trades a day max altogether throughout all 3 sessions. no big news trading times and no overnight trades -Use 1 % on forex pairs and up to 2% on XAUUSD risk per trade - Automatically calculate lot size based on stop loss -use fixed RR ratio [1:2] For forex pairs
Universal Indicator EA for MT5
30 - 100 USD
The Expert Advisor (EA) must work with any custom indicator that provides Buy and Sell signals through buffers. The EA should read signals from the indicator and execute trades according to the defined rules. The EA must be universal and able to work with different indicators as long as they provide signal buffers. I will share the rest of the details with you shortly
I have an existing TradingView Pine Script. I will provide the Pine Script source code after agreement. Goal: Convert the logic into MT5 (MQL5) and build an EA. Phase 1: Create MT5 indicator that matches TradingView signals (M15 only) Phase 2: Build EA with strict execution rules: max 4 trades total one trade per symbol gold lot limit (max 0.02 total) reversal logic (close then open opposite) no re-entry after manual
Requirements 1.Robot for Entry and Exit rules as per my indicators. 2.Back testing which can work on all time frames. 3.A system which i can modify later on as well according to my studies
Fixing a bugged EA
36+ USD
I have been working on an EA that is based on Ichimoku cloud and SMC internal blocks for stop loss. ENTRY BUGS: 1. I have entries issues with the chenkou and price action. It is entering trades when chenkou is poking through the kumo. This shouldn't happen. There should be a candle close with chenkou above kumo or below. 2. Another entry issue with other criteria for tenkan and price action also these entries are
MT5 Dual-Account Hedge Synchronization
100 - 180 USD
MT5 Dual-Account Hedge Synchronization EA I need an Expert Advisor for MetaTrader 5 that runs on two trading accounts (same broker, same VPS). The EA must work in a bidirectional way (both accounts run the same EA). Core Functionality: - Detect when a trade is closed using OnTradeTransaction() - Capture: symbol, closed volume, account ID, timestamp - Send this data to the other account via a shared local file On
Projektdetails
Budget
40+ USD
Ausführungsfristen
von 1 bis 5 Tag(e)