Hello Victor,

I don't understand what you are asking me?

If the transmitter trade has very close TP/SL levels to the open price and these levels cannot be copied to the receiver account, because there are too close the the current price, that is a broker issue.

Not all brokers allow very small distance between the TP/SL levels and the trade opening price, some brokers have 0 such levels, but others have larger levels, like 20-30 points or even more.

My transmitter does not necessarily have the price of TP/SL very close to the position price, but it is not immediately copied as soon as the trade is opened in the slave account.

The TP/SL of the transmitter is set with delay in the slave account. And besides this, before my TP/SL is correctly defined in the slave account, your Expert Advisor puts a “temporary” TP/SL, if you like, which is super close to the position price.

This is not normal and Local Trade Copier EA MT4 does not place temporarily TP/SL levels, you have something confused.

In the last version of Local Trade Copier EA MT4 the TP/SL levels are applied instantly with the opening of the receiver trade, so make sure that you are using the latest 3.70 version.

Check the Experts tab of the receiver terminal to see why the TP/SL levels are copied with a delay in your receiver trades please.

Also send me the receiver settings as a set file to check.

Below you see the Experts tab of a receiver terminal copying a transmitter trade that has TP/SL levels applied.

The trade is opened instantly, within 300ms and has the TP/SL levels already applied, there is no modification for the TP/SL levels and there are no temporary TP/SL levels applied.

This trade was opened with the default receiver settings.

If in your receiver trade there is modification in the TP/SL levels, it must be the same in the transmitter side too. Have you checked the Experts tab of the transmitter terminal to see how the TP/SL levels are applied?

Send me your receiver settings as a set file to check please and a screenshot of the Experts tab of your transmitter and receiver terminals while a trade is being copied, to see what is the reason for what you are describing.

Without any data from your setup, I cannot help you.

You contact me through private message if you like, I have sent you messages there as well.

https://www.mql5.com/en/users/eleanna74

Hola,, 

Después de haber probado el demo y de trabajar correctamente, He comprado el software.. En la primera terminal de copia trabaja correctamente,, pero en la segunda terminal y en las siguientes  terminales no funciona.

Mi topología es:  1 transmisor, 4 receptores.

Agradezco la ayuda.

En el demo, hice la prueba en múltiples con los 4 receptores  y funciono correctamente.

Gracias

Juan

Hello Juan, give some more information please in order to be able to help you.

Have you perfomed the exact same setup in all 4 receiver terminals?

Watch the quick setup video carefully please:

https://www.youtube.com/watch?v=w6jA6uZ-Ofo

Do your non working receiver terminals have any suffix in their symbols, like EURUSDm or EURUSD.pro?

If they do, watch the above quick setup video, after 1:15 that shows a setup with suffixes.

Post some screenshots of your non working receiver terminals to check please.

Also have you installed Local Trade Copier EA MT4 properly through your MQL5 account in all 4 receiver terminals, or you copy/paste the ex4 file from one terminal to another?

Copy/paste of ex4 files does not work with MQL5.com Market purchases!

You need to install your Local Trade Copier EA MT4 in all your transmitter and receiver terminals the same way, through your donchinche MQL5 account, following the installation guide, after step 6:

https://www.mql5.com/en/blogs/post/745683

hi

i just purchased locat trade copier but unfortunately its not copying any trades from transmitter account to receiver account. i did go through the setting video and try to copy each and every settings but still its not working. 

i would like to be receive assistance on this

Hello and thank you for your purchase.

Check if your transmitter or receiver symbols have any suffixes in their symbols, for example EURUSDm or EURUSD.pro.

If they have, you must put these in the Suffix of the Transmitter Account and Suffix of the Receiver Account settings, in the receiver side settings.

Watch carefully the second part of the quick setup video, after 1:15 where it shows an example with suffixes.

If you still can't copy check the Experts tab of the receiver account for any messages or errors.

If you see a [trade is disabled] message, it means that trading is not enabled in your receiver trading account in general and you need to contact your broker to enable it.

If you are trying to copy pending orders, you need to put the Copy Pending Orders=true in the receiver account settings.

https://www.youtube.com/watch?v=w6jA6uZ-Ofo

Hello, this happens because you have 3 or 4 Local Trade Copiers EA MT4 attached in 3-4 charts of the receiver account, when you need only one (1) in one chart, any chart and it will copy all trades from all symbols.

So, attach only one (1) Local Trade Copier EA MT4 in the transmitter account and only one (1) Local Trade Copier EA MT4 in the receiver account, on one chart, any chart and then follow the setup you see in the quick setup video below:

https://www.youtube.com/watch?v=w6jA6uZ-Ofo

Hi, I case I just want to copy one symbol only, how can I do? thanks so much.

Hello, you need to put in the receiver side setting, only the symbol that you want to copy.

Symbols to Copy: ... (put here the symbol that you want to copy, as it is written in the receiver account)

Hi, I have a question about mapping setting.

The broker (transmitter) has 1 symbol for one instrument "AUDCHF".

The broker (receiver) has 2 symbols for one instrument i.e. both "AUDCHF" and "AUDCHF.i", but only "AUDCHF.i" can be traded.

How to set to make transmitter "AUDCHF" to copy signal to receiver "AUDCHF.i" and ignore receiver  "AUDCHF"?

Hello and thank you for your purchase.

If you use the default settings of Local Trade Copier EA MT4 the receiver GER40 trade will be copied instantly when the traansmitter trade is opened at whatever the price.

If you want to copy the receiver trade at a smaller price difference with the transmitter trade you have 2 options:

First you can use the Maximum Copying Difference in Points setting in the receiver side, to put the maximum price difference that you can accept in this setting. If for example you put 10 you will not copy the transmiter GER40 trade on the receiver side, unless the price difference is under 10 points. That of course can make you miss the trade entirely if the market moves quickly against you.

• Maximum Copying Difference in Points: The maximum allowed difference in price between transmitter and receiver accounts, when copying a trade.

Secondly you can use the Better Price settings, that allow you to copy a transmitter trade on the receiver price at the same, better or worse price level, according to your settings.

• Better Price: True/false for copying transmitter trades at a better, worse or the same price onto the receiver account(s), according to your setting below. Warning: if this option is true you may miss copying a transmitter trade completely if the market moves quickly against you.

• Better Price Difference in Points: This setting makes it possible to open copied receiver trades at a better, worse or the same price onto the receiver account(s), according to your setting. If you put 0 in this setting, the EA will copy the transmitter trade onto the receiver account at the same or better price. If the transmitter buy open price is 1.08800 and this setting is 50, the receiver copied buy trade will be opened at 1.08750. There is also an option to open copied receiver trades when a certain level of profit is reached on the transmitter side, by using a negative value in this setting. For example if the transmitter buy open price is 1.08800 and this setting is -50, the receiver copied buy trade will be opened at 1.08850.

You can read all the details about the settings in the settings/inputs guide: https://www.mql5.com/en/blogs/post/745681

Hello and thank you for your purchase.

In your case you must put in the receiver account settings:

Suffix of the Receiver Account: .i

and that way you will copy all receiver symbols with the .i suffix smoothly.

Hello dear friends,

Local Trade Copier EA MT4 had a major update with many changes and additions and I strongly advise you to make this update with no open trades on the receiver account side, when all receiver copied trades have been closed.

1. Copy Long/Short true/false settings are now applied correctly to pending orders too.

2. Split Copied Trades in Parts setting works smoothly now, overriding maximal volume issues on the receiver accounts.

3. Maximum Number of Copied Magic Numbers and Maximum Number of Copied Symbols settings have been added, that allow to copy only a certain number of magic numbers or symbols at the same time on the receiver accounts.

4. Add/Subtract Points in TP/SL Levels settings have been added that can add or subtract certain number of points in the TP/SL levels of the original transmitter trades on the receiver copied trades.

5. The option not to copy transmitter trades to the receiver side if these don't have an applied stop loss level, has been added.

6. A Copy Market Trades=true/false setting has been added, allowing the user to copy only pending orders and not market trades.

7. Copying Delay in Seconds and Closure Delay in Seconds settings have been added, that allow the user to copy and close the transmitter trades to the receiver side with a certain number of seconds delay.

8. All lot size types that were previously calculated based on the account's balance can now also be calculated based on the account's equity.

9. A Reopen Closed Copied Trades setting has been added that allows the user to reopen receiver closed copied trades instantly or at the opening price if these are still running in the transmitter side.

10. Take profit can now be applied on the receiver copied trades based on risk/reward ratio of the copied stop loss.

11. New automatic partial closure settings have been added, that allow the user to close automatically and partially all receiver copied trades at 3 % take profit and 3 % stop loss levels for 3 % levels of the copied lot size.

12. Finally, a new Maximum Daily Drawdown % setting has been added that will close all receiver copied trades and pause copying until the next day, when it is reached. This will allow users to work with LTC on prop firms more effectively.

** I strongly advise you to make this update with no open trades on the receiver account side, when all receiver copied trades have been closed. **

Eleni Anna Branou