Buy/Sell When Price Moves Into My Desired Direction Only - Zone-Based Trading EA/Indicator

Job finished

Execution time 204 days
Feedback from customer
Working with Phil was great! He is responsive, handles requests and updates in a timely manner and delivered a working product that exceeds my expectations. I look forward to working with him again!
Feedback from employee
It was a pleasure working with AJ. Challenging project but together we pulled it off. Great eye for detail and giving information required. Very positive person. Looking forward to another time!

Specification

I’m wanting an EA that allows me to trade using a zone-based strategy. A zone is essentially a price area at which one usually believes price is going to reverse. We commonly find them in trading referred to as “price reversal zones”, “pivots” or “supply/demand zones”. 

When I’m trading in a zone, I usually draw out the price at which I’m willing to buy/sell into the zone (this is my entry price) and the price that I will exit the trade if the price of the asset is not moving in my desired direction (this is my stop loss price). Additionally, I set a target for where I think price will go if it is successful in reversing.

As of right now, to get the lowest risk entry, I have to literally sit and watch price. I set price alerts in my platform and then once price crosses my alert price, I have to be there to place an order. This order is usually a buy stop or sell stop.

I only want to enter trades when price actually reverses and exits the zone in my desired direction. We call that a “confirmation entry” because price moves into my order from within the zone. I don’t want to have to sit and wait for price to enter the zone and then place the orders. I want the EA to do this for me.

I want an EA that will allow me to designate all of the necessary variables, then that places an order when price crosses the activation price that I set. Additionally, I want to be able to use two protective stops. One standard stop loss that sits at a certain pre-defined price (usually a few pips below the zone) and the second one would be a trailing stop that allows for partial take profits and closes based on if price returns to trigger the trailing stop.

Here’s the specs…

  1. Be able to Input if the order is a buy/sell. 
  2. I want to input the lot size of the trade. 
  3. I want to input the asset to trade, i.e. EUR/USD, XAGUSD, a stock, commodity, or whatever else I’m trading.
  4. Input the near current price zone line, i.e. the price at which price needs to cross in order for the EA to place my buy/sell stop order. We can call this the "activation price", or "proximal zone price”.
  5. Input the far from current price zone line, i.e. the price at which the EA will cancel my buy/sell stop order if price crosses this line. We can call this the "invalidation price" or the "distal zone price”.
  6. Input the actual purchase price, i.e. the price at which the order should be placed if price crosses the activation price line. —> This is the buy/sell stop order.
  7. Input the standard stop loss/protective stop price for the buy/sell stop order to be placed.
  8. Input the target price of the buy/sell stop order that will be placed.
  9. Set if there should be a trailing stop or not.
  10. Set the number of pips for the trailing stop.
  11. Set the partial lot size that should be closed if price returns to the level of the trailing stop.
  12. The standard stop loss closes any remaining portion of the lot size if price returns to the level of the standard stop. The standard stop can be moved up and adjusted as usual.
  13. I’d like to have an ID number or Unique identifier for the relating "invalidation listeners" and entry orders set by the EA.
  14. If the market price reaches my pending order entry price and fills the order, the EA should cancel the “invalidation listener”.
  15. Once the trade is active in the market and the order filled, the EA should essentially be “off” for that trade and do nothing else. (The trailing stop could just be an instance of MT4’s standard trailing stop feature that is simply triggered by the order that the EA set, the trade itself does not need to be managed by the EA at all once activated.
  16. I’d like to be able to manually cancel any pending activation zones and be sure that the EA does not set any pending orders after doing so.
  17. I’d like to be able to see a full list of all of the pending activation zones that the EA is listening for and be able to manage (i.e. edit and delete) them.
  18. When managing the pending activation zones, there should be an alert if I’m about to delete and invalidation listener that is listening for a pending entry order that has yet to be filled.
  19. The EA has to be able to calculate the acceleration of price into the zone so that it can evaluate whether to place the buy/sell order immediately, or to wait until price has firmly entered the zone. For example, sometimes price reaches my desired zone and and it straddles my entry price line for a good bit of time before it goes in either direction. Hesitant price movement like this would cause the EA to delay placing the order and/or adjust the activation price to be further into the zone.
  20. So there needs to be an input also for how many pips into the zone that the EA has permission to move the activation price if the acceleration of price is above/below a certain value.
  21. There may also need to be an input for what degree or percentage of acceleration of price into the zone to include in the EA's evaluation of when to place the live order.
There may be a few other variables that we have to evaluate that I'm not yet able to list because of the conceptual nature of the idea. When we are testing in real-world, live market scenarios, I (and you) will be better able to access any additional needs/adjustments.

The general idea here is that I want to minimize my risk with zone-based trading. I only want to get into a trade if it’s moving into my ideal price. And I do not want to put money on the table if it is not. Additionally, I want the option to place a trailing stop to secure profits immediately on the first pull back in any move that is a move in my desired direction.


In the images above, you’re seeing the actual pending MT4 order on the asset. This is what it would look like after the activation price has been reached and the EA places the order. Additionally though, the EA would be “listening” to price to ensure that if it crosses below the invalidation price (usually the same as the pending stop loss), that the order will be canceled and ruled out as invalidated.

Once price moves up into the buy price, the order would be activated with a trailing stop that is trailing by whatever number of pips I’ve indicated for that particular trade.


Here's a screenshot (demo-mockup) of the interface that I'm looking for.


(Also attached as a file for close up review.)

Along with the specifics that are described above, do you feel that you are able to do you believe that this is something you can code? If so, I would appreciate reviewing your application! This development agreement would be totally exclusive ownership to me. You would not be able to use, reproduce, showcase or otherwise share, distribute, etc. the code or finished product that you develop for me.

PLEASE PROVIDE A PRICE QUOTE FOR HOW MUCH YOU FEEL IT WOULD TAKE FOR YOU TO DO THIS JOB AND THE AMOUNT OF TIME IT WILL TAKE.

Thanks in advance!

Responded

1
Developer 1
Rating
(90)
Projects
118
17%
Arbitration
44
23% / 39%
Overdue
20
17%
Free
2
Developer 2
Rating
(130)
Projects
184
32%
Arbitration
18
28% / 67%
Overdue
27
15%
Free
Published: 1 code
3
Developer 3
Rating
(65)
Projects
87
39%
Arbitration
3
0% / 33%
Overdue
29
33%
Free
4
Developer 4
Rating
(66)
Projects
95
28%
Arbitration
20
25% / 55%
Overdue
24
25%
Free
5
Developer 5
Rating
(16)
Projects
21
19%
Arbitration
7
0% / 71%
Overdue
14
67%
Free
6
Developer 6
Rating
(49)
Projects
134
27%
Arbitration
62
13% / 53%
Overdue
58
43%
Free
Published: 290 articles, 1 code
7
Developer 7
Rating
(1)
Projects
1
0%
Arbitration
1
0% / 100%
Overdue
0
Free
Similar orders
I am looking someone to create an EA based on my MACD Histo indicator / strategy from Pinescript. I will send it to you for you to replicate. The EA shall have: - Divergence length in bars, min and max values. - Pivot Logic - Entry on close of divergence confirmation bar. - Dynamic lot size dependent on SL/TP, in monetary value. - SL / TP in percent away from entry, separate values for long and short. - Time, day and
1️⃣ Support and Resistance Levels Draw only strong support and resistance levels. Detect hidden strong support and resistance levels. Add strength rating stars for each level: ⭐⭐⭐ = Very Strong ⭐⭐ = Medium ⭐ = Weak (may break easily) Indicator must not repaint (No Repaint). 2️⃣ Professional Dashboard Display all timeframes from 1 minute to monthly. For each timeframe: Green color with an upward arrow if the trend is
Mt5 30+ USD
Hi, I've purchased a licensed Expert Advisor (EA), but the seller isn't the original developer. Can we remove the license so I can use it on multiple accounts? Or what do you recommend we do
Hello, I have a breakout EA with reversal logic. I own the full source code for both MT4 and MT5 versions. I need the modifications implemented for both MT4 and MT5 versions. I need several modifications: – Multiple reversals with configurable parameters – Breakeven functionality – Entry only after candle close beyond range + offset – Time-based activation – Alternative offset calculation logic – Automatic close at
simple automated trading system with adaptive risk management and trend-based execution. The EA manages trades with dynamic position handling and built-in stability filters. Designed for single-position trading and disciplined execution 30 usd budget
PROJECT DESCRIPTION Looking for 1 experienced MQL5 developer to build 2 Expert Advisors for MetaTrader 5, targeting XAUUSD and major currency pairs. Strong preference for a single developer handling both EAs to maximize code reuse, reduce cost, and ensure consistency. EA1 — Grid Martingale Pro · Buy/Sell grid with Fixed or ATR Dynamic distance (ATR read once per fill, stored in grid_step_at_open[]) · Gap
Hi I have a simple task (hopefully) I have a custom strategy that I built with the help of Claude Anthropic - everything is finished and I zipped it with power shell but when importing it NT8 gives me the error message that the file was made from an older, incompatible version or not a NinjaScript. My folder structure is correct as far I can see so I don't know what the issues is and it's costing me too much to go
Do you happen to have a profitable strategy for MNQ? it is urgent if any one can help me with this i will be happy to discuss with you and move forward to pay for it kindly let me know the amount thank fill free to bid
Subject: Development of Ultra-High Precision Confluence Indicator - M1 Binary Options (Non-Repaint) ​ Hello, I am looking for a Senior MQL5 Developer to create a custom "Surgical Precision" indicator for MetaTrader 5, specifically optimized for 1-minute (M1) Binary Options trading. The system must integrate three distinct layers of algorithmic analysis. ​ 1. Core Logic: Triple-Layer Confluence ​The signal (Call/Put)
Looking for an experienced MQL5 developer to design and develop a custom Expert Advisor (EA) for MetaTrader 5. The purpose of this EA is not just automated trading, but also to help me better structure, test, and refine my personal trading strategy

Project information

Budget
80+ USD
Deadline
from 3 day(s)