Renko Line Break vs RSI EA:
An Expert Advisor based on two indicators - Renko Line Break and RSI. It trades stop orders.
Author: Serhii Ivanenko
The renkolinebreak indi is already in my folder however when I load the EA, it says : Creating renkolinebreak fails. and the EA was removed.
You can now run the EA.
Forum on trading, automated trading systems and testing trading strategies
newdigital, 2013.10.16 08:04
How to Use Renko Bricks and Moving Averages to Find Trades
To add a 13-period exponential moving average to the Renko chart, choose
EMA from the Add Indicator menu then change “Number of periods” to 13.
Notice the chart above which displays both Renko bars and a 13-period
exponential moving average. A simple system can be built around the
Renko bars and the moving average. When Renko price bars cross below the
moving average and turns red, traders can enter short and stay with the
trend until the Renko bars cross back above the moving average.
An initial stop could be placed just above the last blue Renko brick.
Keep in mind that in the above example, each brick is equal to five
pips. In the above example, the red circles mark where the Renko bars
crossed below the moving average. A trader can see that a number of pips
could have been gathered as the bars stayed below the moving average.
On the other hand, when the Renko bars change color and cross above the
moving average, traders can enter long placing stop just below the last
red Renko brick. The above chart shows in the green circles, points were
the Renko price bars moved above the moving average generating a clear
Renko charts, without the dimension of time, may take a little getting a
little used to. But once you get the hang of them, you may find it
difficult to go back to the candles. Adding a moving average gives
excellent signals for entry and exit. Marrying them up with other
indicators can magnify the benefits of trading without noise and scary
newdigital, 2013.10.12 11:16
Trading Trends with Renko Charts
- Renko harts filter out the noise of wicks and are based solely on price without time.
- Renko charts clearly indicate support and resistance.
- Can be used to confirm trends or can be traded on their own.
Have you ever been stopped out of trade only to have it move in the direction you originally thought?
Do you have trouble recognizing trend direction?If you answered “Yes” to either one of these questions, then you may want to give Renko charts a try.
Renko means brick in Japanese. Every brick is the same size and a new
brick is drawn one brick size below or above the brick before it. Bricks
that are adjacent never overlap. Every brick starts where the previous
brick ends. Traders can specify the size of bricks in pips. In the
example above, the distance from the high and low of the brick is three
pips. So a ten brick move is equal to 30 pips (10 bricks times 3-pip
Price can move above and below the previous brick until the minimum
number of brick is met. This may be a surprise for most traders who are
used to a new candle being formed at a specific time. We can see 13
bricks in a row heading up going into the Bank of England rate decision.
Once the decision is released the bricks changed in color from blue to
red and there was a lower high leading to a 13 brick decline.
A double bottom that happened when the US Initial Jobless Claims was
released ended the selling and the uptrend resumed on the weaker US
data. The negative sentiment for GBPUSD following the Bank of England
interest rate announcement could be easily seen with streak of red
How to Trade Using Renko
A simple system could be used in which if we have 2 bricks of the same
color establishes a trend that we could use as a trigger to either get
long or short. On the other hand, a 1 brick of the opposite color ends
the trend and we would exit the trade.
Buy filtering out time and whipsaws, Renko charts were able to map out
market sentiment within small time frames like the 5-minute chart which
usually have a lot of noise. However, Renko has its drawbacks. When a
line of bricks goes into a range changing color after 2 or 3 bricks,
traders can get whipsawed by price action.
It is easier to stand aside and wait for Renko bricks to move from the
congestion channel and begin trending again. This can be clearly seen
at the end of the EUR/AUD chart as the line of bricks breaks out to a
new low clearing past the previous congestion area.
In sum, it is easy to see that Renko charts can provide forex traders
with a new and fresh way to approach price action. Being based on price
action rather than time, traders can stay with trends longer and exit
with confidence with clear signals.
newdigital, 2013.09.03 11:03
Renko (extraction from Achelis - Technical Analysis from A to Z)
The Renko charting method is thought to have acquired its name from "renga"
which is the Japanese word for bricks. Renko charts are similar to Three Line Break charts except that in a Renko chart,
a line (or "brick" as they're called) is drawn in the direction of the prior
move only if prices move by a minimum amount (i.e., the box size). The bricks
are always equal in size. For example, in a 5-unit Renko chart, a 20-point rally
is displayed as four, 5-unit tall Renko bricks.
Kagi charts were first
brought to the United States by Steven Nison when he published the book, Beyond Candlesticks.
Basic trend reversals are signaled with the emergence of a new white or black
brick. A new white brick indicates the beginning of a new up-trend. A new black
brick indicates the beginning of a new down-trend. Since the Renko chart is a
trend following technique, there are times when Renko charts produce whipsaws,
giving signals near the end of short-lived trends. However, the expectation with
a trend following technique is that it allows you to ride the major portion of
Since a Renko chart isolates the underlying price trend by filtering out the
minor price changes, Renko charts can also be very helpful when determining
support and resistance levels.
Renko charts are always based on closing prices. You specify a "box size"
which determines the minimum price change to display.
To draw Renko bricks, today's close is compared with the high and low of the
previous brick (white or black):
If the closing price rises above the top of the previous brick by at least
the box size, one or more white bricks are drawn in new columns. The height of
the bricks is always equal to the box size.
If the closing price falls below the bottom of the previous brick by at least
the box size, one or more black bricks are drawn in new columns. Again, the
height of the bricks is always equal to the box size.
If prices move more than the box size, but not enough to create two bricks,
only one brick is drawn. For example, in a two-unit Renko chart, if the prices
move from 100 to 103, only one white brick is drawn from 100 to 102. The rest of
the move, from 102 to 103, is not shown on the Renko chart.
Developed in the 18th century in Japan to trade rice, Renko charting is a
trend following technique. It is excellent for filtering out price
“noise” so traders can catch a major part a given Forex trend. It was
believed that the name “Renko” originated from the Japanese word ‘renga’
Similar to Kagi and Point and Figure charting, Renko ignores the element
of time used on candlesticks, bar charts, and line charts. Instead,
Renko focuses on sustained price movement of a preset amount of pips.
For example, a trader can set the bricks for as little as 5 pips or as
many as 100 or more. A new brick will not be formed until price has
moved 100 pips. It could take 24 hours for a new brick to form or it
could take just a few hours. However, no bricks will form until the
preset limit is achieved.
Find the Trend Direction
Renko charts can incorporate many of the usual technical indicators like
stochastics, MACD, and moving averages. Today’s strategy will marry up
Forex Renko charts with a 200 Exponential Moving Average (EMA) to find
trend direction. Very simply, if price is trading above its 200 EMA,
then the trend is up. If price is trading below its 200 EMA, then the
trend is down.
This filter will give us a directional bias much like a compass or GPS.
We will look to only take long trades when the Renko bricks are trending
above the 200 EMA. On the other hand, in a downtrend, if the Renko
bricks are trending below the 200 EMA, then the trend down. Forex
traders will only look to short the market. One of the biggest mistakes
swing traders make is entering trades that go counter to the dominant
When to Get In
After the dominant trend direction is determined, traders can use the
simplicity of Renko charts with a single 13 period EMA as a ‘trigger’ to
signal an entry in the direction of the major trend. First, wait for at
least two green bricks to appear above the 13 EMA. Then enter long on
the appearance of the second green brick above the 13 EMA.
Exiting for Profit and for Loss
Once a trader is “triggered” into the trade, a protective stop can be
set one-brick size below the 13 EMA. As long as the bricks remain above
the 13 EMA, we look to stay with the trend. Just as the 13 EMA can get
you in a new trade, the same EMA can be used to stop out a winning trade
locking in profits.
Traders will need to manually move the stop one brick-size below 13 EMA
and the current price brick. You can see in the example above how the
combination of Renko and the 13 EMA helps traders stay with the trend a
Hello. Im brazilian and when i try run this EA, don't run and show me this messange: "2015.07.07 10:39:57 Tester no OnTester function implemented in the EA optimized by custom criterion"
how can i fix it ?
Please enable the necessary setting in your browser, otherwise you will not be able to log in.