PSAR indicator

MQL4 Indikatoren

Auftrag beendet

Ausführungszeit 1 Tag
Bewertung des Kunden
Very good and responsive coder. He was fast with delivery too. Thanks Il Anokhin.
Bewertung des Entwicklers
Good customer!

Spezifikation

I want a simple indicator that works with Parabolic SAR.

The indicator will have input called Distance Calculator and the normal PSAR inputs.

For Buy:

The formula for distance calculator is = (PSAR dot 0  - PSAR dot 1) / (PSAR dot 1  - PSAR dot 2)

a.       The indicator always draws a red horizontal line on the CURRENT lower PSAR dot.

psar dot line


a.       The indicator uses the distance calculator = (PSAR dot 0  - PSAR dot 1) / (PSAR dot 1  - PSAR dot 2) to get a value.

b.       If the input value of the distance calculator = 2, and the value obtained after calculating by the indicator is >= 2.13, then the red line changes to 1 green horizontal line and 1 green vertical line on that current PSAR dot (i.e 1 green horizontal and 1 green vertical), the indicator also sounds an alarm 3 times, and  shows BUY pop up notification of the currency pair.  

c.       If the calculated value is less that the input distance calculator, then do nothing.

Note there will only be one line on the chart at every point in time, i.e Current PSAR dot.

 

For Sell:

The formula for distance calculator is = (PSAR dot 1  - PSAR dot 0) / (PSAR dot 2 - PSAR dot 1)

a.       The indicator always draws a red horizontal line on the CURRENT upper PSAR dot.

b.       The indicator uses the distance calculator = (PSAR dot 1  - PSAR dot 0) / (PSAR dot 2 - PSAR dot 1)to get a value.

c.       If the input value of the distance calculator = 2, and the value obtained after calculating by the indicator is >= 3.27, then the red line changes to 1 green horizontal line and 1 green vertical line on that current PSAR dot (i.e 1 green horizontal and 1 green vertical), the indicator also sounds an alarm 3 times, and  shows SELL pop up notification of the currency pair.  

d.       If the calculated value is less that the input distance calculator, then do nothing.

Bewerbungen

2
Entwickler 2
Bewertung
(84)
Projekte
149
31%
Schlichtung
32
34% / 41%
Frist nicht eingehalten
43
29%
Frei
3
Entwickler 3
Bewertung
(395)
Projekte
556
41%
Schlichtung
30
57% / 3%
Frist nicht eingehalten
57
10%
Frei
Veröffentlicht: 11 Beispiele
4
Entwickler 4
Bewertung
(365)
Projekte
507
40%
Schlichtung
159
17% / 74%
Frist nicht eingehalten
99
20%
Beschäftigt
5
Entwickler 5
Bewertung
(807)
Projekte
1127
43%
Schlichtung
47
49% / 23%
Frist nicht eingehalten
84
7%
Frei
6
Entwickler 6
Bewertung
(574)
Projekte
945
47%
Schlichtung
309
58% / 27%
Frist nicht eingehalten
125
13%
Frei
7
Entwickler 7
Bewertung
(206)
Projekte
333
35%
Schlichtung
66
12% / 58%
Frist nicht eingehalten
87
26%
Frei
8
Entwickler 8
Bewertung
(68)
Projekte
111
26%
Schlichtung
17
6% / 71%
Frist nicht eingehalten
15
14%
Frei
Veröffentlicht: 9 Beispiele
9
Entwickler 9
Bewertung
(646)
Projekte
874
48%
Schlichtung
29
38% / 17%
Frist nicht eingehalten
63
7%
Frei
10
Entwickler 10
Bewertung
(114)
Projekte
154
47%
Schlichtung
2
0% / 50%
Frist nicht eingehalten
4
3%
Frei
11
Entwickler 11
Bewertung
(66)
Projekte
95
28%
Schlichtung
20
25% / 55%
Frist nicht eingehalten
24
25%
Frei
12
Entwickler 12
Bewertung
(221)
Projekte
369
66%
Schlichtung
10
50% / 0%
Frist nicht eingehalten
46
12%
Frei
Ähnliche Aufträge
i have indicator for Trading View, also copy for NT, i need someone to improve and check the NT version (indicator is simple is volume density koncept)…. when i put same settings on TV version and NT version i have diffrerent results, but this can be because diffrent market data or fact that TV sending tick info in blocks , not tick by tick like NT8 on both. I(ndicator base on counting volume) so besied that is it
Please may someone assist me with the indicator attached, it has a SERIOUS BUG issue in the sense that when I load it, and activate the template (attached as well) MT4 ALWAYS freezes and then eventually disconnects automatically, ALL THE TIME. It even gets worse to an extent that after disconnecting a number of times mt4 ends up not loading anymore, UNTIL I remove the indicator. Please I WILL NEED A DEMO (FOR A DAY)
‎A trending candle followed by a smaller trending candle which is the second candle with no 5EMA ‎ ‎The 3rd candle is a reversal candle in which it and it's immidiate previous candle must be at least 70% of each other's body or equal body, with no 5EMA touch ‎ ‎the 3rd candle candle is followed immediately by the 4th candle which is the signal candle in which it and the 1st cabdle must be also at least 70% of
LynxMT5algo 30 - 100 USD
An mt5 add on indicator like gainalgo style to show entrance and exit areas for gold silver and Btc scalping. It will be used to make trading more easy for beginners
I have the Fisher Indicator shown below the chart. I need an alert added for when the Fisher Indicator hits the 50 point at the end of each period. GBPUSD and EURUSD 4H charts are provided and I can provide additional
Hello here, I need someone who can work on pinescript and also with Renko charts. My entries for my strategy would be based on stop orders Kindly let me know if you can work on this for me and i will send necessary file and quote in the chat
Freelance Task — EA Recovery Layer Hello. I have a ready-made MQL5 EA. The signals, SL/TP and lot calculation should essentially not be touched. I need a recovery system added. I am not a programmer — below is how the robot should behave. What stays Entry only from an EA signal. Stop-loss is not a new signal. Trailing is already built into my EA — recovery does not implement its own trailing. If trailing is disabled
# SNRZ BOT — SESSION PROGRESS LOG Last updated: 2026-09-16 (local late-evening session) ## SAN BOT (new — cloned from SNRZ) - `MQL5\Experts\AutomatedOrderBot_SAN.mq5` / `.ex5` — v1.0, compiled 0 errors/0 warnings - Signal source: custom indicator "SAN" (InpSANName, buy buf 0 / sell buf 1, target bar 1), same SNRZ-style read, MA fallback if missing - Magic number 234567 (separate from SNRZ 123456 so both bots can run
Should be as it but no alarms, also we need to add a deep search so he can see all the preves candles and a memory function so its not slowing down the indicator. for higher time frames daily 4h 1h around 365 days and for lower time frames we do up to 20k bars but both flexible so i can change it later. the memory is important so the indicator is not always recalculating everything when a new candle shows especially
Hi, I need an experienced NinjaTrader 8/NinjaScript developer to finish or rebuild an automated futures strategy, ideally by the end of this week. I already have the complete TradingView Pine Script reference strategy, an existing ~2,000-line NinjaScript implementation, Playback logs, and known historical benchmark trades. MOST IMPORTANT REQUIREMENT: TRADINGVIEW ↔ NINJATRADER PARITY. The Pine Script is the reference

Projektdetails

Budget
30 USD
Ausführungsfristen
von 1 bis 2 Tag(e)