See sample Expert Advisor (EA) which included into MT4 installer:
This EA uses calls of built-in indicator iMACD().
//+------------------------------------------------------------------+ //| MACD Sample.mq4 | //| Copyright © 2005, MetaQuotes Software Corp. | //| https://www.metaquotes.net// | //+------------------------------------------------------------------+ extern double TakeProfit = 50; extern double Lots = 0.1; extern double TrailingStop = 30; extern double MACDOpenLevel=3; extern double MACDCloseLevel=2; extern double MATrendPeriod=26; //+------------------------------------------------------------------+ //| | //+------------------------------------------------------------------+ int start() { double MacdCurrent, MacdPrevious, SignalCurrent; double SignalPrevious, MaCurrent, MaPrevious; int cnt, ticket, total; // initial data checks // it is important to make sure that the expert works with a normal // chart and the user did not make any mistakes setting external // variables (Lots, StopLoss, TakeProfit, // TrailingStop) in our case, we check TakeProfit // on a chart of less than 100 bars if(Bars<100) { Print("bars less than 100"); return(0); } if(TakeProfit<10) { Print("TakeProfit less than 10"); return(0); // check TakeProfit } // to simplify the coding and speed up access // data are put into internal variables MacdCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,0); MacdPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,1); SignalCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,0); SignalPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,1); MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0); MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1); total=OrdersTotal(); if(total<1) { // no opened orders identified if(AccountFreeMargin()<(1000*Lots)) { Print("We have no money. Free Margin = ", AccountFreeMargin()); return(0); } // check for long position (BUY) possibility if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDOpenLevel*Point) && MaCurrent>MaPrevious) { ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green); if(ticket>0) { if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice()); } else Print("Error opening BUY order : ",GetLastError()); return(0); } // check for short position (SELL) possibility if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && MacdCurrent>(MACDOpenLevel*Point) && MaCurrent<MaPrevious) { ticket=OrderSend(Symbol(),OP_SELL,Lots,Bid,3,0,Bid-TakeProfit*Point,"macd sample",16384,0,Red); if(ticket>0) { if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice()); } else Print("Error opening SELL order : ",GetLastError()); return(0); } return(0); } // it is important to enter the market correctly, // but it is more important to exit it correctly... for(cnt=0;cnt<total;cnt++) { OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES); if(OrderType()<=OP_SELL && // check for opened position OrderSymbol()==Symbol()) // check for symbol { if(OrderType()==OP_BUY) // long position is opened { // should it be closed? if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && MacdCurrent>(MACDCloseLevel*Point)) { OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position return(0); // exit } // check for trailing stop if(TrailingStop>0) { if(Bid-OrderOpenPrice()>Point*TrailingStop) { if(OrderStopLoss()<Bid-Point*TrailingStop) { OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green); return(0); } } } } else // go to short position { // should it be closed? if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDCloseLevel*Point)) { OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position return(0); // exit } // check for trailing stop if(TrailingStop>0) { if((OrderOpenPrice()-Ask)>(Point*TrailingStop)) { if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0)) { OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red); return(0); } } } } } } return(0); } // the end.
This EA uses calls of built-in indicator iMACD().
Now I want to use the custom indicator MACD instead the built-in iMACD. I have modified the source code:
//+------------------------------------------------------------------+ //| MACD Sample.mq4 | //| Copyright © 2005, MetaQuotes Software Corp. | //| https://www.metaquotes.net// | //+------------------------------------------------------------------+ extern double TakeProfit = 50; extern double Lots = 0.1; extern double TrailingStop = 30; extern double MACDOpenLevel=3; extern double MACDCloseLevel=2; extern double MATrendPeriod=26; //+------------------------------------------------------------------+ //| | //+------------------------------------------------------------------+ int start() { double MacdCurrent, MacdPrevious, SignalCurrent; double SignalPrevious, MaCurrent, MaPrevious; int cnt, ticket, total; // initial data checks // it is important to make sure that the expert works with a normal // chart and the user did not make any mistakes setting external // variables (Lots, StopLoss, TakeProfit, // TrailingStop) in our case, we check TakeProfit // on a chart of less than 100 bars if(Bars<100) { Print("bars less than 100"); return(0); } if(TakeProfit<10) { Print("TakeProfit less than 10"); return(0); // check TakeProfit } // to simplify the coding and speed up access // data are put into internal variables MacdCurrent=iCustom(NULL,0,"MACD",12,26,9,0,0); MacdPrevious=iCustom(NULL,0,"MACD",12,26,9,PRICE_CLOSE,MODE_MAIN,1); SignalCurrent=iCustom(NULL,0,"MACD",12,26,9,0,0); SignalPrevious=iCustom(NULL,0,"MACD",12,26,9,1,1); MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0); MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1); total=OrdersTotal(); if(total<1) { // no opened orders identified if(AccountFreeMargin()<(1000*Lots)) { Print("We have no money. Free Margin = ", AccountFreeMargin()); return(0); } // check for long position (BUY) possibility if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDOpenLevel*Point) && MaCurrent>MaPrevious) { ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green); if(ticket>0) { if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice()); } else Print("Error opening BUY order : ",GetLastError()); return(0); } // check for short position (SELL) possibility if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && MacdCurrent>(MACDOpenLevel*Point) && MaCurrent<MaPrevious) { ticket=OrderSend(Symbol(),OP_SELL,Lots,Bid,3,0,Bid-TakeProfit*Point,"macd sample",16384,0,Red); if(ticket>0) { if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice()); } else Print("Error opening SELL order : ",GetLastError()); return(0); } return(0); } // it is important to enter the market correctly, // but it is more important to exit it correctly... for(cnt=0;cnt<total;cnt++) { OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES); if(OrderType()<=OP_SELL && // check for opened position OrderSymbol()==Symbol()) // check for symbol { if(OrderType()==OP_BUY) // long position is opened { // should it be closed? if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && MacdCurrent>(MACDCloseLevel*Point)) { OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position return(0); // exit } // check for trailing stop if(TrailingStop>0) { if(Bid-OrderOpenPrice()>Point*TrailingStop) { if(OrderStopLoss()<Bid-Point*TrailingStop) { OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green); return(0); } } } } else // go to short position { // should it be closed? if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDCloseLevel*Point)) { OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position return(0); // exit } // check for trailing stop if(TrailingStop>0) { if((OrderOpenPrice()-Ask)>(Point*TrailingStop)) { if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0)) { OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red); return(0); } } } } } } return(0); } // the end.
Dear Mr.Rosh
I have some problem at
'Dear Mr. Rosh, Now the problem is .....'
Thank you in advanced!
Hi ! Dear Rosh
I try to use iCustom() Transferring an Indicator Code into an Expert Advisor Code
Suppose I have an EA named AAA and an indicator named XYZ
Until now I can success transferring parameters from EA to indicator XYZ
Do some calculate in XYZ and get results ( I can see the results using Filewrite instruction inside the XYZ )
But I can transferring any result back to EA AAA
Questions :
1. Does a third program named Get_XYZSeries.mqh need to put on C:\Program Files\...\experts\include ?
2. Please give me the key parts of the three proghams that can transfer the results back to EA AAA ?
Thank you in advanced !