LotSize

• Value: 0.1
• Explanation: Initial lot size for each trade
• Advice: For FTMO 100k$ account, use 0.1 - 0.2 lot. Smaller = less risk.

MagicNumber

• Value: 123456
• Explanation: Unique number that identifies this EA's trades (allows multiple EAs on same account)
• Advice: Change only if using multiple different EAs on the same account.

FractalShift

• Value: 2
• Explanation: Number of candles to detect a fractal (reversal signal)
• Advice: Do not modify (Bill Williams standard value).

MaxConsecutiveLosses

• Value: 10
• Explanation: Maximum number of consecutive losses before EA automatically stops
• Advice: Anti-catastrophe safety. 10 is reasonable for FTMO.

2. Martingale (Progressive Lot Management)

EnableMartingale

• Value: true
• Explanation: Enables martingale strategy (increases lot after loss to recover)
• Advice: DISABLE (false) for strict FTMO challenges. Enable (true) for personal accounts.

MartingaleMultiplier

• Value: 2.0
• Explanation: How much to multiply lot after a loss (2.0 = double the lot)
• Advice: 1.5 - 2.0 is reasonable. Higher = more risk.

MaxLotMultiplier

• Value: 8.0
• Explanation: Maximum lot multiplication limit (8x = maximum 3 consecutive losses)
• Advice: Do not exceed 8.0 for FTMO. Protects against explosive losses.

ResetLotAfterWin

• Value: true
• Explanation: Resets lot to base value after a win
• Advice: ALWAYS true (security).

MaxMartingaleSteps

• Value: 5
• Explanation: Maximum number of martingale steps allowed
• Advice: 3-5 for FTMO, 5-7 for personal accounts.

3. Debug Messages

DebugMessages

• Value: true
• Explanation: Displays detailed messages in MT5 logs (entries, exits, neurons, etc.)
• Advice: true during testing, false in production to reduce noise.

4. Multi-Trades (Simultaneous Trades)

EnableMultiTrades

• Value: true
• Explanation: Allows opening multiple trades simultaneously
• Advice: true to diversify risk, false for conservative mode.

MaxSimultaneousTrades

• Value: 3
• Explanation: Maximum number of trades open at the same time
• Advice: 2-3 for FTMO, 3-5 for aggressive accounts.

MinMinutesBetweenTrades

• Value: 15
• Explanation: Minimum time between two trades (prevents overtrading)
• Advice: 15 min = maximum 4 trades per hour. Increase to 30 min for conservative mode.

MaxTotalExposure

• Value: 0.3 (30%)
• Explanation: Maximum percentage of account exposed simultaneously
• Advice: 0.2-0.3 (20-30%) for FTMO, never exceed 0.5 (50%).

5. Neural Network (AI Core)

NN_HiddenNeurons

• Value: 8
• Explanation: Number of hidden neurons in the network (4 specialized + 4 adaptive)
• Advice: DO NOT MODIFY. Optimized for EUR/USD.

NN_LearningRate

• Value: 0.001
• Explanation: Neural network learning speed
• Advice: 0.0005 - 0.002. Lower = slow but stable learning.

NN_UseBackpropagation

• Value: true
• Explanation: Enables automatic learning after each trade
• Advice: ALWAYS true (otherwise robot doesn't learn).

NN_SpecializedNeurons

• Value: 4
• Explanation: Number of specialized neurons (Scalping, Swing, Momentum, Volatility)
• Advice: DO NOT MODIFY. Fixed architecture.

6. Adam Optimizer (Accelerated Learning)

UseAdamOptimizer

• Value: true
• Explanation: Uses Adam algorithm for 2x faster learning
• Advice: ALWAYS true (superior to classic SGD).

Adam_Beta1

• Value: 0.9
• Explanation: Adam momentum parameter (smooths variations)
• Advice: Standard value, do not modify unless advanced testing.

Adam_Beta2

• Value: 0.999
• Explanation: Adam RMSprop parameter (learning rate adaptation)
• Advice: Standard value, do not modify.

Adam_Epsilon

• Value: 0.00000001 (1e-8)
• Explanation: Prevents division by zero in calculations
• Advice: Never modify.

7. L2 Regularization (Anti-Overfitting)

UseL2Regularization

• Value: true
• Explanation: Reduces overfitting by 40% (avoids being too adapted to historical data)
• Advice: ALWAYS true.

L2_Lambda

• Value: 0.001
• Explanation: Regularization strength
• Advice: 0.0005 - 0.002. Do not modify unless comparative backtests.

8. Attention Mechanism (Intelligent Focus)

UseAttentionMechanism

• Value: true
• Explanation: Allows network to dynamically focus on most important indicators
• Advice: ALWAYS true (improves accuracy by 15-25%).

9. Drawdown Protection (Loss Protection)

MaxDrawdownPercent

• Value: 50.0%
• Explanation: Maximum allowed loss as percentage of capital before automatic stop
• Advice: FTMO Challenge = 10%, FTMO Verification = 5%, Personal accounts = 20-50%.

MaxDrawdownMoney

• Value: 5000 USD
• Explanation: Maximum allowed loss in dollars before stop
• Advice: FTMO 100k = 10000 USD (10%), FTMO 200k = 20000 USD (10%).

EnableDrawdownProtection

• Value: true
• Explanation: Enables automatic closure if drawdown exceeds limits
• Advice: ALWAYS true (critical safety for FTMO).

10. Multi-Timeframe Filter (Multi-Period Filter)

EnableMultiTimeframeFilter

• Value: true
• Explanation: Verifies multiple timeframes are aligned before trading
• Advice: true = more conservative, false = more aggressive.

MTF_Higher1

• Value: M15 (15 minutes)
• Explanation: First higher timeframe to verify
• Advice: M15 or H1 depending on your style.

MTF_Higher2

• Value: H1 (1 hour)
• Explanation: Second higher timeframe (background trend)
• Advice: H1 or H4 to confirm main trend.

MTF_MaPeriod

• Value: 50
• Explanation: Moving average period used for multi-timeframe filter
• Advice: 50 = standard, 100 = slower but more reliable.

MTF_MinAlignment

• Value: 0.6 (60%)
• Explanation: Minimum alignment percentage required between timeframes
• Advice: 0.5-0.7. Higher = fewer trades but more accurate.

11. Moving Average

MaPeriod

• Value: 30
• Explanation: Number of candles to calculate main moving average
• Advice: 20-50 for active trading, 100-200 for long term trading.

MaTimeframe

• Value: M5 (5 minutes)
• Explanation: Time period for moving average
• Advice: M5 for scalping, M15 for day trading.

MaMethod

• Value: SMA (Simple)
• Explanation: Moving average type (Simple, Exponential, Smoothed, Linear)
• Advice: SMA = standard, EMA = more reactive.

MaPrice

• Value: CLOSE (closing price)
• Explanation: Price used to calculate average
• Advice: CLOSE = standard (others: OPEN, HIGH, LOW, MEDIAN, TYPICAL, WEIGHTED).

12. Trading Hours

TradingStartHour

• Value: 7
• Explanation: Trading start time (24h format)
• Advice: 7am = European session, 2pm = American session.

TradingEndHour

• Value: 21
• Explanation: Trading end time
• Advice: 9pm covers London + New York. Avoid 10pm-7am (low liquidity).

GMTOffset

• Value: 0
• Explanation: Your broker's time offset from GMT
• Advice: Check your broker's timezone (GMT+2, GMT+3, etc.).

AutoClosePositionsEndSession

• Value: true
• Explanation: Automatically closes all positions at end time
• Advice: true to avoid unsupervised overnight positions.

13. Regime Detection (Trend/Range Detection)

RegimeTF

• Value: M5
• Explanation: Period used to detect market regime (trend or range)
• Advice: M5 or M15 for reactive detection.

RegFastMA

• Value: 10
• Explanation: Fast moving average period for regime detection
• Advice: 10-20 for sensitive detection.

RegSlowMA

• Value: 40
• Explanation: Slow moving average period
• Advice: 30-50, must be 3-4x larger than RegFastMA.

RegATR

• Value: 14
• Explanation: ATR (Average True Range) period to measure volatility
• Advice: 14 = standard, do not modify.

RegADX

• Value: 14
• Explanation: ADX (Average Directional Index) period for trend strength
• Advice: 14 = standard.

TrendThresh

• Value: 0.25
• Explanation: Threshold to consider trending (|score| > 0.25 = trend, else range)
• Advice: 0.2-0.3. Lower = detects trends earlier.

VolStop

• Value: 0.75
• Explanation: Volatility threshold to stop trading (market too agitated)
• Advice: 0.7-0.9. Lower = more conservative in volatility.

14. Advanced AI (Multi-Objective Optimization)

AI_MemorySize

• Value: 150
• Explanation: Number of trades memorized for learning
• Advice: 100-200. More = learning on more history.

AI_RiskRewardWeight

• Value: 0.4 (40%)
• Explanation: Importance of risk/reward ratio in decisions
• Advice: Sum of all weights must = 1.0.

AI_SharpeWeight

• Value: 0.3 (30%)
• Explanation: Importance of Sharpe ratio (risk-adjusted return)
• Advice: Higher = favors regularity of gains.

AI_DrawdownWeight

• Value: 0.2 (20%)
• Explanation: Importance of minimizing losses
• Advice: Increase for conservative FTMO mode.

AI_WinRateWeight

• Value: 0.1 (10%)
• Explanation: Importance of win rate
• Advice: Less important than risk/reward.

AI_MultiTimeframeLearning

• Value: true
• Explanation: Learns on multiple timeframes simultaneously
• Advice: ALWAYS true (more complete market vision).

15. Dynamic TP/SL Calculation (Take Profit and Stop Loss)

UseDynamicStopLoss

• Value: true
• Explanation: Automatically calculates Stop Loss based on market volatility
• Advice: true = adaptive, false = uses fixed values.

UseDynamicTakeProfit

• Value: true
• Explanation: Automatically calculates Take Profit
• Advice: true for automatic adaptation.

DefaultStopLossPips

• Value: 60 pips
• Explanation: Fixed SL if dynamic mode disabled
• Advice: 40-80 pips for EUR/USD M15.

DefaultTakeProfitPips

• Value: 120 pips
• Explanation: Fixed TP if dynamic mode disabled
• Advice: 1:2 ratio recommended (TP = 2x SL).

MinStopLossPips

• Value: 30 pips
• Explanation: Minimum allowed SL (protection against too small SL)
• Advice: 20-40 pips depending on EUR/USD volatility.

MaxStopLossPips

• Value: 150 pips
• Explanation: Maximum allowed SL
• Advice: 100-200 pips. Larger = more capital at risk.

MinTakeProfitPips

• Value: 40 pips
• Explanation: Minimum TP
• Advice: Must be > MinStopLossPips for favorable ratio.

MaxTakeProfitPips

• Value: 300 pips
• Explanation: Maximum TP
• Advice: 200-400 pips depending on trading style.

ATR_Period_TPSL

• Value: 14
• Explanation: ATR period used to calculate dynamic TP/SL
• Advice: 14 = standard.

ATR_Multiplier_SL

• Value: 1.5
• Explanation: ATR multiplier for Stop Loss (SL = ATR x 1.5)
• Advice: 1.0-2.0. Higher = wider SL.

ATR_Multiplier_TP

• Value: 3.0
• Explanation: ATR multiplier for Take Profit (TP = ATR x 3.0)
• Advice: 2.0-4.0. Must be 2x ATR_Multiplier_SL minimum.

16. Trading Days

TradeMonday, TradeTuesday, TradeWednesday, TradeThursday, TradeFriday

• Value: true
• Explanation: Enable/disable trading for each day of week
• Advice: Disable Friday after 3pm (widened spreads) and Monday morning (volatility).

TradeSaturday, TradeSunday

• Value: false
• Explanation: Weekend trading (market closed for Forex)
• Advice: ALWAYS false for Forex.

17. Daily Reset

ResetLotDaily

• Value: true
• Explanation: Resets lot to base value each day at midnight
• Advice: true for controlled martingale.

ResetDrawdownDaily

• Value: false
• Explanation: Resets drawdown counter each day
• Advice: FALSE for FTMO (cumulative drawdown over entire period).

18. Intelligent Neural TP/SL

UseNeuralTPSL

• Value: true
• Explanation: Uses 8 neurons to calculate optimal TP/SL
• Advice: true = intelligent TP/SL, false = TP/SL based on ATR only.

NeuralTPSL_Sensitivity

• Value: 1.0
• Explanation: Neural calculation sensitivity (0.5 = conservative, 2.0 = aggressive)
• Advice: 0.8-1.2 for balance.

NeuralTPSL_MinConfidence

• Value: 0.6 (60%)
• Explanation: Minimum confidence required to use neural TP/SL (otherwise uses ATR)
• Advice: 0.5-0.7. Higher = uses neurons less often.

19. Early Neural Exit

UseNeuralExit

• Value: true
• Explanation: Closes position if neurons change opinion (reverse signal)
• Advice: true = active protection, false = keeps position until TP/SL.

NeuralExit_Threshold

• Value: 0.30 (30%)
• Explanation: Neural change threshold to exit (30% = strong change)
• Advice: 0.2-0.4. Lower = exits more easily.

NeuralExit_ProtectProfit

• Value: true
• Explanation: Exits only if in profit (keeps losing positions)
• Advice: true to protect acquired gains.

NeuralExit_CheckInterval

• Value: 5 ticks
• Explanation: Frequency of neuron verification (every 5 ticks)
• Advice: 5-10. Lower = more reactive but more CPU.

20. Trailing Stop & Take Profit

UseTrailingStop

• Value: true
• Explanation: Enables trailing Stop Loss (follows price in profit)
• Advice: true to automatically protect profits.

TrailingBasedOnProfit

• Value: true (v6.1)
• Explanation: Bases trailing on percentage of current gains
• Advice: true = smarter than fixed distance.

TrailingProfitPercent

• Value: 50.0% (v6.1)
• Explanation: Percentage of gains to protect (50% = protects half of profits)
• Advice: 30-70%. Higher = more conservative.

TrailingStopDistance

• Value: 20 pips
• Explanation: Trailing distance if percentage mode disabled
• Advice: 15-30 pips for EUR/USD.

TrailingStepPips

• Value: 5 pips
• Explanation: Trailing movement step (moves every 5 pips of profit)
• Advice: 3-10 pips. Lower = more frequent but more orders.

UseTrailingTP

• Value: false
• Explanation: Enables trailing Take Profit (EXPERIMENTAL)
• Advice: false (experimental feature, may reduce profits).

TrailingTP_DistancePips

• Value: 30 pips
• Explanation: Trailing TP distance
• Advice: If enabled, 20-50 pips.

TrailingActivateAtProfit

• Value: true
• Explanation: Activates trailing only when in profit
• Advice: ALWAYS true (don't trail losses).

TrailingActivatePips

• Value: 10 pips
• Explanation: Number of profit pips before activating trailing
• Advice: 5-15 pips. Lower = activates earlier.

MinBrokerStopBufferPips

• Value: 2.0 pips (v6.1)
• Explanation: Safety buffer to avoid broker rejections (too close to market)
• Advice: 1-3 pips depending on your broker. Strict brokers = 3 pips.

21. Multi-Index Correlation (v6.0)

UseCorrelationContext

• Value: true
• Explanation: Analyzes 8 correlated instruments to detect Risk-On/Risk-Off
• Advice: true = smarter decisions (+15% accuracy).

CorrLookbackBars

• Value: 50 bars
• Explanation: Number of candles to calculate correlation
• Advice: 30-100. More = more stable correlation.

CorrRecalcMinutes

• Value: 5 minutes
• Explanation: Correlation recalculation frequency (intelligent cache)
• Advice: 3-10 minutes. Lower = more reactive but more CPU.

CorrTimeframe1, CorrTimeframe2, CorrTimeframe3

• Value: M5, M15, H1
• Explanation: 3 timeframes used for multi-timeframe correlation
• Advice: Keep M5/M15/H1 for short/medium/long term vision.

22. Correlated Instruments Selection

Include_GBPUSD

• Value: true
• Explanation: Include GBP/USD (highly correlated to EUR/USD)
• Advice: true (important major pair).

Include_USDJPY

• Value: true
• Explanation: Include USD/JPY (risk appetite indicator)
• Advice: true (risk-on/risk-off).

Include_USDCHF

• Value: true
• Explanation: Include USD/CHF (dollar strength)
• Advice: true (inverse EUR/USD).

Include_AUDUSD

• Value: true
• Explanation: Include AUD/USD (commodity currencies)
• Advice: true (market sentiment).

Include_EURJPY

• Value: true
• Explanation: Include EUR/JPY (EUR strength)
• Advice: true (EUR correlation).

Include_DXY

• Value: false
• Explanation: Include Dollar Index (DXY)
• Advice: false as unavailable with most brokers. true if available.

Include_XAUUSD (Include_Gold)

• Value: true
• Explanation: Include Gold (safe haven in crisis)
• Advice: true (critical Risk-Off indicator).

Include_SPX500

• Value: false
• Explanation: Include S&P 500 (risk appetite)
• Advice: true if your broker offers SPX500/US500. Verify exact symbol.

Include_DAX

• Value: false
• Explanation: Include DAX (European market)
• Advice: true if available (European correlations).

23. Contextual Filtering

UseContextFiltering

• Value: true
• Explanation: Filters trades according to global market context
• Advice: true = fewer trades but better quality.

ContextConfidenceBoost

• Value: 1.3 (30% boost)
• Explanation: Increases confidence if favorable context (Risk-On for EUR/USD)
• Advice: 1.2-1.5. Higher = more aggressive in favorable context.

ContextConfidenceCut

• Value: 0.6 (40% reduction)
• Explanation: Reduces confidence if unfavorable context
• Advice: 0.5-0.7. Lower = more conservative.

BlockTradesOnBadContext

• Value: false
• Explanation: Completely blocks trades if very unfavorable context
• Advice: false = flexible, true = ultra-conservative (may miss opportunities).

Might be easier to just pin a .set file!

;-)

bonjour merci pour votre EA , avez vous un fichier set