Комментарии могут оставлять пользователи, купившие или арендовавшие продукт
cradios73  
Hello, I have problems with metacot net, I would put the indicator on some graphics, I tried with auto detect = true but the data that reports are incorrect, I compared timingcharts.com them, appears in the display: undef. Symbol. After I tried to put auto I detect = false, I went on to report cot cftc.com, I tried many times, for example crude oil, of new york mercantile exchange, I put the exact name and the indicator does not appear, you can help me? ( for the platinum is ok , for example ) 
cradios73  
cradios73:
Hello, I have problems with metacot net, I would put the indicator on some graphics, I tried with auto detect = true but the data that reports are incorrect, I compared timingcharts.com them, appears in the display: undef. Symbol. After I tried to put auto I detect = false, I went on to report cot cftc.com, I tried many times, for example crude oil, of new york mercantile exchange, I put the exact name and the indicator does not appear, you can help me? ( for the platinum is ok , for example ) and the williams commercial index , other indicator that i have bought , is not an oscillator , this is  the same of metacot netto , the result is the same line of the metacot netto , if the period is different 52 , the result is the same , anything difference between metacot netto and william commercial index cot 
Vasiliy Sokolov  
cradios73:
Hello, I have problems with metacot net, I would put the indicator on some graphics, I tried with auto detect = true but the data that reports are incorrect, I compared timingcharts.com them, appears in the display: undef. Symbol. After I tried to put auto I detect = false, I went on to report cot cftc.com, I tried many times, for example crude oil, of new york mercantile exchange, I put the exact name and the indicator does not appear, you can help me? ( for the platinum is ok , for example ) 
Hi! Of course the data must equal. I will contact you via private message system and we will solve your problem.
Cobh63  

Hi Vasiliy,

 

I recently purchased this indicator and have a general question in relation to it's use. 

 

 For example if I want to get the net positions  of Aud which chart do I apply it to.

 

Is the indicator only to be applied to AudUsd to get the net position of Aud.

 

Or can the indicator be applied to other Aud charts, for example, AudCad. 

 

If I apply it to AudCad chart what is the indicator actually displaying?

 

I analyze a lot of cross pairs and I would like to know if the indicator has meaning with the cross pairs. 


 Thank you,

Cobh63 

Файлы:
AUDUSDWeekly.png  34 kb
AUDCADWeekly.png  43 kb
Vasiliy Sokolov  
Cobh63:

Hi Vasiliy,

I recently purchased this indicator and have a general question in relation to it's use. 

For example if I want to get the net positions  of Aud which chart do I apply it to. 

Is the indicator only to be applied to AudUsd to get the net position of Aud.

Or can the indicator be applied to other Aud charts, for example, AudCad. 

If I apply it to AudCad chart what is the indicator actually displaying?

I analyze a lot of cross pairs and I would like to know if the indicator has meaning with the cross pairs.

Thank you,

Cobh63 

Cross pair on Forex (AUDCAD, EURGBP etc) not suported.

CFTC report available only for direct curses with u.s. dollar (EURUSD, USDJPY, GBPUSD, USDCHF, AUDUSD, USDCAD etc).

p.s. This feature is not indicators, as the CFTC report. Simply cross pairs no data.

Cobh63  
Vasiliy Sokolov:

Cross pair on Forex (AUDCAD, EURGBP etc) not suported.

CFTC report available only for direct curses with u.s. dollar (EURUSD, USDJPY, GBPUSD, USDCHF, AUDUSD, USDCAD etc).

p.s. This feature is not indicators, as the CFTC report. Simply cross pairs no data.

Ok, thanks now I understand.
Evgeniy Popov  

Проверьте пожалуйста. После обновления, появилась ошибка. Несмотря на то, что в настройках индикатора установлено использование отчета по фьючерсам и опционам все равно отображает данные  только по фьючерсам.

Пример: по отчетам позиций по Фьчерсам и опционам от 9 мая  по Евре открытый интерес составляет 486 753 контрактов. В индикаторе выбрано Futures and options, а отображает он значение 418 301, что соответствует отчетам  только по фьючерсам. 

скрин

Файлы:
1345676543.jpg  391 kb
Vasiliy Sokolov  
evgenbest:

Проверьте пожалуйста. После обновления, появилась ошибка. Несмотря на то, что в настройках индикатора установлено использование отчета по фьючерсам и опционам все равно отображает данные  только по фьючерсам.

Пример: по отчетам позиций по Фьчерсам и опционам от 9 мая  по Евре открытый интерес составляет 486 753 контрактов. В индикаторе выбрано Futures and options, а отображает он значение 418 301, что соответствует отчетам  только по фьючерсам. 

Понял. Взял Ваше сообщение в разработку. В понедельник постараюсь разобраться.
Vasiliy Sokolov  
evgenbest:

Проверьте пожалуйста. После обновления, появилась ошибка. Несмотря на то, что в настройках индикатора установлено использование отчета по фьючерсам и опционам все равно отображает данные только по фьючерсам.

Пример: по отчетам позиций по Фьчерсам и опционам от 9 мая  по Евре открытый интерес составляет 486 753 контрактов. В индикаторе выбрано Futures and options, а отображает он значение 418 301, что соответствует отчетам  только по фьючерсам. 

Vasiliy Sokolov:
Понял. Взял Ваше сообщение в разработку. В понедельник постараюсь разобраться.
Ошибка исправлена. Новая версия 2.13 с корректным отображением типа отчета предоставлена на проверку модераторам. Дождитесь выхода новой версии и обновите свои индикаторы.
Vasiliy Sokolov  

 METACOT 2.51 AVAILABLE 

 In this version of the program has many improvements and additional features. This post will talk about these features:


  • Starting from this version, a new utility for downloading reports is available - MetaCOT Data Provider. This utility work as Win32 system tray application and download CFTC reports in background mode. If you use this utility you can make auto update reports from MetaCOT indicators and don't use 'MetaCOT Install CFTC Reports';
  • 'MetaCOT CFTC Install Reports' tool was upgraded. Now, it contains the new help system. Its general window also was changed. Now, this window contains information about the status of the connection, a status of the database (outdated or not) and status of MetaCOT Data Provider Win32 until (install or not). If this util available 'MetaCOT CFTC Install Reports'        load local files and parse it.
  • MetaCOT indicators and Toolbox Library began to contain inner COT data for the most basic symbols. This data can use if MetaCOT wasn't installed. This option is useful in the strategy tester if the installation was not performed. 
  • All indicators began to contain the system of update data (mini tool based on 'MetaCOT CFTC Install Reports'). If you use MetaCOT Data Provider utility, you can update reports automatically and don't use 'MetaCOT Install CFTC Reports'. For this case, you need switch on new parameter 'AutoUpdate' in position true.
  • Added parameter 'Not Show Continues Data'. If this flag is enabled - last unknowing values are empty. Otherwise last unknowing values continue.
  • Added control for bad combination parameter. If you select nonreportable group of trades and also select Data Type as 'Number of Traders' you will see the message 'Incorrect combination of parameters'.
  • Removed parameter 'Data Type' for Largest COT indicators group. This parameter not effect for largest traders. 
  • Fixed a bug in strategy tester. When any indicators were started in strategy tester it's valued was intermittent.
  • Fixed a bug that caused an error 'invalid pointer access' in some cases  
  • Now all MetaCOT indicators and ToolBox Library contain additional GUI forms and MessageBox for more user friendly. The work of indicators has become clearer.

SEE MORE ABOUT METACOT 2.51

Комментарии могут оставлять пользователи, купившие или арендовавшие продукт