Correcting incorrect display on MTF mode of indicator and other minor additions

Работа завершена

Время выполнения 17 дней

Техническое задание

Hello coders,

1) I discovered the MTF mode of my indicator https://www.mql5.com/en/market/product/34543 gives erroneous infos, because one candle on a given timeframe is considered equivalent to one candle on another timeframe.

In MTF mode this indicator allows display only on the smallest TF for which there is a positive value for the coefficient.

The values of the curves are correct for the current candle in MTF mode, but for the antepenultimate one for example, the correct value for the chart TF is considered, and at the same time the value of the antepultimate candle of a larger TF if there is a larger TF considered. In summary the values are incorrect relative to the timeline of the chart timeframe the indicator is showing.

I don't know if it is easy to have correct values in MTF mode.

If I see the indicator on M15 TF and it is 15h32, the closed candle ending at 15h29 and its value should be considered for the last closed candle value of M15. If D1 TF is considered (MTF mode) this last closed candle on M15 should consider the last closed candle value on D1. This last closed candle on D1 is the same considered for the value of D1 used in the M15 TF for the candles ending at 14h59, at 14h29 etc, because on D1 TF at those times last closed candles, were the exact same (unlike M15 last closed candles, which have changed).

I noticed the error because when I put for example 30 as coefficient for D1 (and 1 as coefficient for M15), and use MTF mode with only M15 and D1, the curves are exactly similar to the curves of D1 in non-MTF mode. Despite the indicator is showing on M15 TF !!

In addition I would like to have :

2) possibility of showing only the 2 curves related to the chart (adding a parameter, Yes/No)

3) drawing arrows on the main chart when the 2 curves (displayed on the indicator subwindow) cross each other (if Yes is choosen in the above parameter)

Thank you !

Откликнулись

1
Разработчик 1
Оценка
(115)
Проекты
129
18%
Арбитраж
11
27% / 55%
Просрочено
4
3%
Свободен
2
Разработчик 2
Оценка
(218)
Проекты
401
60%
Арбитраж
13
38% / 23%
Просрочено
159
40%
Работает
Похожие заказы
This strategy is going to be based on 3 sets of indicators. Indicator 1: Moving averages. Here we need 2 moving averages. ✓ The 50EMA and, ✓ The 200EMA. - Whenever the red 200EMA is above the blue 50EMA, this gives the idea that the market is bearish (look for sell opportunities) - Whenever the 50EMA is above the 200EMA this gives as the ideas that the market us bullish (look for buy opportunities). Indicator 2
Hi, I have a trading view indicator project that I've done most of it, and it needs to be completed within 36 hours. I need an expert pine script to help me finishing it. the strategy is the alignment of divergence with demand and supply zones, when the price gets rejected from a demand zone with divergence, the indicator should give a buy signal, and when a supply zone rejects the price, the indicator should give a
I want EA to picks symbols of the most strong, and trade by typical indicator like MACD. EA calculate this strength in real time to pick which symbols to be traded. For this, once everyday EA calculate the historic strength of all given symbols with ten years historic data, and, with this value, EA calculate Relative Strength in real time continuously. The exact calculation method will be given after being dedicated
The idea of the trading system is as follows : market entries are performed when MACD's main and signal lines intersect in the current trend direction . 2. Trend is determined based on the with the specified period. If the current EMA value is greater than the previous one, the trend is seen as growing (Ema current > Ema previous). Alternatively, if current EMA is below the previous one, the trend is considered
I need just the code tgat draws trendlines and channels. But with a twist. I need it drawing trend lines afte 2 candles then if a new inner trend happens that line is drawn plus keep original and if there is a channel occurring draw the top of the candle trendline on an uptrend but what's more important is the lines are drawn on the bottom the and top corners to corners of trend not tail n whacks then I also need
Hi developers, I would like to connect my TradingView alerts to MT5 using webhooks. Just a simple buy sell is good enough, no need stop loss, no need take profit. You will need to deliver: 1. Telegram integration (reception of TradingView webhooks signals to be sent to MT5 EA) 2. MT5 EA codes 3. Option of customize lot size (1 lot in TradingView => 0.1 lot in MT5) 4. Have Master Token and
I need a simple interface to open, manage and close orders on metatrader 4. The software must be able to: close manually or automatically when obtained SL or TP; calculate the correct lot size (amount of money, % of capital or % for every pip); when inserted SL or TP or R:R, automatically calculate the other parameters; select different parzialization during the trade; select BE; define the maximum of operations
The blue EA 35+ USD
The idea is to take positions after the change of colour on the histogram based on the number of bars since the colour change This must be in the input of the EA ie after xyz bars take a buy when its in blue or sell after xyz when its in red on EA settings we must have Magic number this can be changed by user magic number must have 5 digits start time 00:00 End time 23:00 lot size :this is the lot size to start with
I have 2 MT4 indicators and I want it to be created into an MT4 EA. It is both ex4 files. The strategy is very simple. I will provide images for reference and the 2 MT4 ex4 files
hello, great developer here am looking for great developer to convert a pinescript indicator to mt4 For me if you Can help me with this You can Bid for this project Best regards

Информация о проекте

Бюджет
40+ USD
VAT (20%): 8 USD
Итого: 48 USD
Исполнителю
36 USD
Сроки выполнения
от 2 до 10 дн.