Помогите разобраться с Советником
Советник Simplefx2. К сожалению не могу установить контакт с автором.
Советник хорошо тестируется в "тестере стратегий" МТ4 на разных периодах и с разными инструментами. На демо вообще не ставит ни одного ордера.
В чём проблема?
Кто знает подскажите.
Заранее благодарен. С.Н.
все ДЦ перепробовали?
такая же беда, тест проходит, ни на демо, ни на реале торговать отказывается, понять не могу в чём причина((( Пробывал 3 разных ДЦ.
В советнике может просто стоять ограничение, например только тестер. Или только демо и тестер. Нужно смотреть код.
//+------------------------------------------------------------------+
//| simplefx2.mq4 |
//| Copyright © 2007, GLENNBACON.COM LLC |
//| http://www.GetForexSoftware.com |
//+------------------------------------------------------------------+
/*
Simple FX source code, expert advisor and user manual are property of
GLENNBACON.COM LLC and may not be altered, used or sold in commercial
products. The Simple FX source code itself may be altered and used in personal
projects as long as the name GLENNBACON.COM LLC and
http://www.GetForexSoftware.com URL are left entacted and visible.
Programmer: Glenn Bacon
Note: Every programmer has their own style and format of writing code. I try
to make the code as readable as possible by using indenting and tab nested code.
There are comments throughout the source explaining what each block/line of code does.
I always use brackets {} to contain my if else and for conditional statements. Some
programmers use shortcuts I do not. I think more programmers should always use
brackets because it makes the code more readable. (bored reading this yet?)
I also only create and use a couple of my own functions because if you create dozens of functions it
makes the code more difficult to read.
If you're not a programmer and have questions about the code do not email me about
the code or what it does. If you are a programmer and have questions about this
code I can be contacted by going to http://www.GetForexSoftware.com and navigate to our
Customer Service page, it has a contact form.
*/
#property copyright "Copyright © 2007, GLENNBACON.COM LLC"
#property link "http://www.GetForexSoftware.com"
// Shift of moving average
#define Shift 1
// Trend Detection function
#define BULL 111111
#define BEAR 222222
// Input variables
extern string comment2 = "*** Order Options ***";
extern double Lots = 0.10;
extern int Stop_Loss = 0;
extern int Take_Profit = 0;
extern int Slippage = 5;
extern string Order_Comment = "Simple FX";
extern int Magic = 112607;
extern color Order_Arrow_Color = Green;
extern string comment3 = "*** Moving Average Options ***";
extern int Long_MA_Period = 200;
extern int Long_MA_Method = 0;
extern int Long_MA_Applied_Price = 4;
extern int Short_MA_Period = 50;
extern int Short_MA_Method = 0;
extern int Short_MA_Applied_Price = 4;
// Global variables
int Total_Open_Orders = 1; // we only want to open one order at a time and only manage the one order
int cnt = 0; // counter variable, used in for() loops
bool init_variables; // init variable when program starts
datetime PreviousBar; // record the candle/bar time
int LastTrendDirection; // record the previous trends direction
int FileHandle; // variable for file handling
int init()
{
if(IsTesting()==false)
{
init_variables = true; // Allows us to init variables in the start function because
// we cannot do this in the init function because the variables
// use values from the chart
//create data file if it does not exist and load variables if file does exist
FileHandle=FileOpen("simplefx.dat",FILE_BIN | FILE_READ);
if(FileHandle<1)
{
Print("simplefx.dat not found.");
FileHandle=FileOpen("simplefx.dat",FILE_BIN | FILE_WRITE);
if(FileHandle>0)
{
LastTrendDirection=0;
FileWriteInteger(FileHandle,LastTrendDirection,SHORT_VALUE);
FileClose(FileHandle);
Print("simplefx.dat has been successfully created.");
}
else
{
FileClose(FileHandle);
Print("Failed to create simplefx.dat file.");
}
}
else
{
LastTrendDirection=FileReadInteger(FileHandle,SHORT_VALUE);
Print("Variables loaded from file.");
FileClose(FileHandle);
}
}
return(0);
}
int deinit()
{
return(0);
}
int start()
{
// moving average only run expert advisor if there is enough candle/bars in history
if(Bars < Long_MA_Period+1)
{
if(IsTesting()==false)
{
Comment("Long moving average does not have enough Bars in history to open a trade!\n",
"Must be at least ",Long_MA_Period, " bars to perform technical analysis.");
}
else
{
Comment("Back testing currently Long moving average does not have enough Bars to open a trade.\n",
"Must be at least ",Long_MA_Period, " bars to perform technical analysis.\n",
"Please be patient and wait...\n",
"Bars in history ",Bars);
}
return(0);
}
// make sure trader has set Lots to at least the minimum lot size of the broker and
// we will normalize the Lots variable so we can properly open an order
if(MarketInfo(Symbol(),MODE_MINLOT) == 0.01)
{
Lots = NormalizeDouble(Lots,2);
if(Lots < 0.01)
{
Comment("The variable Lots must be 0.01 or greater to open an order. ");
return(0);
}
}
if(MarketInfo(Symbol(),MODE_MINLOT) == 0.1)
{
Lots = NormalizeDouble(Lots,1);
if(Lots < 0.1)
{
Comment("The variable Lots must be 0.1 or greater to open an order. ");
return(0);
}
}
if(MarketInfo(Symbol(),MODE_MINLOT) == 1)
{
Lots = NormalizeDouble(Lots,0);
if(Lots < 1)
{
Comment("The variable Lots must be 1 or greater to open an order. ");
return(0);
}
}
// init variables when the expert advisor first starts running
if(init_variables == true)
{
PreviousBar = Time[0]; // record the current canle/bar open time
// place code here that you only wnat to run one time
init_variables = false; // change to false so we only init variable once
}
// record trends direction
if(LastTrendDirection==0)
{
if(TrendDetection()==BULL)
{
LastTrendDirection=BULL;
}
if(TrendDetection()==BEAR)
{
LastTrendDirection=BEAR;
}
// save variables to file
SaveVariables();
}
// perform analysis and open orders on new candle/bar
if(NewBar() == true)
{
// only perform analysis and close order if we only have one order open
if(TotalOpenOrders() == Total_Open_Orders && SelectTheOrder() == true)
{
if(OrderType() == OP_BUY && TrendDetection() == BEAR)
{
OrderClose(OrderTicket(),OrderLots(),Bid,Slippage,Order_Arrow_Color);
}
if(OrderType() == OP_SELL && TrendDetection() == BULL)
{
OrderClose(OrderTicket(),OrderLots(),Ask,Slippage,Order_Arrow_Color);
}
}
// only perform analysis and open new order if we have not reached our Total_Open_Orders max
if(TotalOpenOrders() < Total_Open_Orders)
{
// open buy
if(TrendDetection() == BULL && LastTrendDirection==BEAR)
{
if(Stop_Loss>0 && Take_Profit>0)
{
// open order
OrderSend(Symbol(),OP_BUY,Lots,Ask,Slippage,Ask-(Stop_Loss*Point),Ask+(Take_Profit*Point),Order_Comment,Magic,0,Order_Arrow_Color);
}
if(Stop_Loss>0 && Take_Profit==0)
{
// open order
OrderSend(Symbol(),OP_BUY,Lots,Ask,Slippage,Ask-(Stop_Loss*Point),0,Order_Comment,Magic,0,Order_Arrow_Color);
}
if(Stop_Loss==0 && Take_Profit>0)
{
// open order
OrderSend(Symbol(),OP_BUY,Lots,Ask,Slippage,0,Ask+(Take_Profit*Point),Order_Comment,Magic,0,Order_Arrow_Color);
}
if(Stop_Loss==0 && Take_Profit==0)
{
// open order
OrderSend(Symbol(),OP_BUY,Lots,Ask,Slippage,0,0,Order_Comment,Magic,0,Order_Arrow_Color);
}
LastTrendDirection=BULL;
// save variables to file
SaveVariables();
}
// open sell
if(TrendDetection() == BEAR && LastTrendDirection==BULL)
{
if(Stop_Loss>0 && Take_Profit>0)
{
// open order
OrderSend(Symbol(),OP_SELL,Lots,Bid,Slippage,Bid+(Stop_Loss*Point),Bid-(Take_Profit*Point),Order_Comment,Magic,0,Order_Arrow_Color);
}
if(Stop_Loss>0 && Take_Profit==0)
{
// open order
OrderSend(Symbol(),OP_SELL,Lots,Bid,Slippage,Bid+(Stop_Loss*Point),0,Order_Comment,Magic,0,Order_Arrow_Color);
}
if(Stop_Loss==0 && Take_Profit>0)
{
// open order
OrderSend(Symbol(),OP_SELL,Lots,Bid,Slippage,0,Bid-(Take_Profit*Point),Order_Comment,Magic,0,Order_Arrow_Color);
}
if(Stop_Loss==0 && Take_Profit==0)
{
// open order
OrderSend(Symbol(),OP_SELL,Lots,Bid,Slippage,0,0,Order_Comment,Magic,0,Order_Arrow_Color);
}
LastTrendDirection=BEAR;
// save variables to file
SaveVariables();
}
}
// when back testing only display chart info every candle/bar so we do not slow down back tests
if(IsTesting() == true)
{
Display_Info();
}
}
// when not back testing display chart info every tick
if(IsTesting() == false)
{
Display_Info();
}
return(0);
}
/////////////////////////////////////////////////////////////////////////
// Common functions //
///////////////////////////////////////////////////////////////////////
int SaveVariables()
{
if(IsTesting()==false)
{
//save variables to file
FileHandle=FileOpen("simplefx.dat",FILE_BIN | FILE_WRITE);
if(FileHandle<1)
{
Print("simplefx.dat not found.");
FileHandle=FileOpen("simplefx.dat",FILE_BIN | FILE_WRITE);
if(FileHandle>0)
{
FileWriteInteger(FileHandle,LastTrendDirection,SHORT_VALUE);
FileClose(FileHandle);
Print("simplefx.dat has been successfully created.");
}
else
{
FileClose(FileHandle);
Print("Failed to create simplefx.dat file.");
}
}
else
{
FileWriteInteger(FileHandle,LastTrendDirection,SHORT_VALUE);
FileClose(FileHandle);
Print("SimpleFX variables successfully saved to file.");
}
}
return(0);
}
// This function returns the total amount of orders the expert advisor has open
int TotalOpenOrders()
{
cnt=OrdersTotal();
int TotalOpenOrders = 0;
if(cnt==0)
{
return(0);
}
else
{
for(;cnt>=0;cnt--)
{
RefreshRates();
OrderSelect(cnt,SELECT_BY_POS);
if(OrderMagicNumber()==Magic)
{
TotalOpenOrders++;
}
}
}
return(TotalOpenOrders);
}
// This function finds the open order and selects it
int SelectTheOrder()
{
cnt=OrdersTotal();
if(cnt==0)
{
return(false);
}
else
{
for(;cnt>=0;cnt--)
{
RefreshRates();
OrderSelect(cnt,SELECT_BY_POS);
if(OrderMagicNumber()==Magic)
{
return(true);
}
}
}
return(false);
}
// This function return the value true if the current bar/candle was just formed
bool NewBar()
{
if(PreviousBar<Time[0])
{
PreviousBar = Time[0];
return(true);
}
else
{
return(false);
}
return(false); // in case if - else statement is not executed
}
// is trend up/bullish or is it down/bearish
int TrendDetection()
{
// BULL trend
if(iMA(NULL,0,Short_MA_Period,0,Short_MA_Method,Short_MA_Applied_Price,0) > iMA(NULL,0,Long_MA_Period,0,Long_MA_Method,Long_MA_Applied_Price,0) && iMA(NULL,0,Short_MA_Period,0,Short_MA_Method,Short_MA_Applied_Price,1) > iMA(NULL,0,Long_MA_Period,0,Long_MA_Method,Long_MA_Applied_Price,1))
{
return(BULL);
}
// BEAR trend
if(iMA(NULL,0,Short_MA_Period,0,Short_MA_Method,Short_MA_Applied_Price,0) < iMA(NULL,0,Long_MA_Period,0,Long_MA_Method,Long_MA_Applied_Price,0) && iMA(NULL,0,Short_MA_Period,0,Short_MA_Method,Short_MA_Applied_Price,1) < iMA(NULL,0,Long_MA_Period,0,Long_MA_Method,Long_MA_Applied_Price,1))
{
return(BEAR);
}
// flat no trend return 0
return(0);
}
void Display_Info()
{
Comment("Simple FX ver 2.0\n",
"Copyright © 2007, GlennBacon.com, LLC\n",
"Visit: www.GetForexSoftware.com\n",
"Forex Account Server:",AccountServer(),"\n",
"Account Balance: $",AccountBalance(),"\n",
"Lots: ",Lots,"\n",
"Symbol: ", Symbol(),"\n",
"Price: ",NormalizeDouble(Bid,4),"\n",
"Pip Spread: ",MarketInfo("EURUSD",MODE_SPREAD),"\n",
"Date: ",Month(),"-",Day(),"-",Year()," Server Time: ",Hour(),":",Minute(),":",Seconds(),"\n",
"Minimum Lot Size: ",MarketInfo(Symbol(),MODE_MINLOT));
return(0);
}
и ссылка на сам советник https://www.mql5.com/ru/code/7653
- Бесплатные приложения для трейдинга
- 8 000+ сигналов для копирования
- Экономические новости для анализа финансовых рынков
Вы принимаете политику сайта и условия использования
Советник Simplefx2. К сожалению не могу установить контакт с автором.
Советник хорошо тестируется в "тестере стратегий" МТ4 на разных периодах и с разными инструментами. На демо вообще не ставит ни одного ордера.
В чём проблема?
Кто знает подскажите.
Заранее благодарен. С.Н.