Hello,

1) if the base of the symbol differs from the deposit currency, then with each tick the value of the point will change, respectively, over time, the profit, loss from stop loss and take profit will also change. Read more here "Why does the expected profit on Take Profit change at every tick?"

2) if the position is already open, you can always compare the values of the calculated profit of the panel with the value of the terminal. To do this, you just need to hover over the Stop Loss or Take Profit line:

3) if the readings of the panel and the terminal are different (at the same time, consider point 1, reconciliation must be performed at the same time), then make sure that the position does not have a swap, and you have not enabled commission accounting. If there is no swap and no commission, then show me this in a screenshot where I can see:

- Deposit currency,

- The symbol on which the order is opened.

- The amount of profit calculated by the terminal.

- and the amount of swap and commission that the panel takes into account when calculating profit. This size is displayed in the order label (you must first enable the display of this information in the settings):

Thank you for your reply, appreciate it. 

This is the NAS100 (the index is accounted in USD and my account is in USD as well). My leverage is 1:30. The first picture is set to be 0.1% of total balance. The second picture is the trade I'm referring to on the previous comment where the EA indicated the loss was going to be $550 and it turned out to be $780. 

1) Fixed loss may include Commission and swap that you did not take into account when opening a position. It is not possible to know in advance the size of the swap, which the position will eventually have, since it is not known how many days the transaction will exist. Therefore, the panel does not take it into account when opening a trade.

The size of the commission that will be charged on a transaction is also technically impossible to know in advance, since there are a lot of types of commission in MT5. For example, there is a type of commission that a broker can charge depending on the duration of the transaction. But the panel can take into account the commission before opening a deal, for this you must select one of the options for calculating the commission in the settings:

- take into account the commission according to the history of transactions. In this option, the panel will analyze the commissions of closed trades, and choose an average value that will be used when calculating the profit loss of a new trade.

- fixed commission, - you set the amount of commission for 1 lot.

2) Also keep in mind that when closing a deal, there may be a slippage of the closing price.

Hello, if you mean vps from mql5.com, then no. This vps does not allow the user to work with the panel interface, and it is more suitable for trading robots that work automatically.

Use a regular vps that has a desktop and you can install a terminal on it. For example, some brokers provide such a VPS.

Hi,

I have to questions. 

#1 Sometimes when I start MT5 the tradepanel wont show up, I just have to drag and drop it from the navigator tab in the trading window. Why is that? 

#2 I have breakeven settings at 2:1 it prompts a error "cant modify stops" and closes the trade at 2:1 instead of breakeven
     when I manually press "breakeven" it modifies the breakeven perfectly.

Thanks, this program is a gamechanger!

Hello, I'm struggling to find in the settings, how you enable the multiple TPs, SLs, and that purple break-even line?

Thank you.

That would be the spread.

Отличный советник. Есть ли возможность сделать привязку клавишь на установку TP, SL и открытия (если лимитка) сразу с локом? 

К примеру если покупка по маркету: нажали 2 - установилась линия стопа с нажатой скрепкой, зафиксировался и не меняется если цена изменилась. Нажали 3 - так же с тейком.

Если лимитка то клавишей 1 - устновка линии открытия и далее 2, 3.

Просто если вход к примеру осуществляется на низком ТФ, к примеру 1М или 3М и при этом волотильность большая то зафиксировать к примеру стоп бывает сложно, пока попадёшь по кнопке фиксации линии.

Лично мне не хвтатет только данной функции в данном советнике. Если такое можно реализовать могу скинуть для примера, посмотреть,  данную функцию в другом советнике, он попроще но данная функция есть.

Hello,

1) when the terminal is launched, the terminal data is synchronized with the data of the server and the trading account. That is, the terminal downloads the parameters of your trading account, lists of open and closed orders, quotes, etc. from the server. The panel is loaded onto the chart only after your terminal has finished uploading data from the server, this prevents the panel functionality from triggering on old and incorrect data.

That is, if you do not see the panel on the chart at startup, this means that your terminal is trying to contact the trade server and downloading data. Accordingly, you need to wait until this process is completed; restarting the panel on the chart will not speed up this process. Usually, with a good Internet speed and a sufficient computer resource, this process takes 1-5 seconds.

If it takes longer for you, then I recommend reducing the list of symbols in the Market Watch window, since it is with this list that you tell the terminal what quotes to upload to the terminal. For example, if there are 1000 symbols in the list, and you trade only on 2 symbols, then your terminal wastes its resources and time to support 998 symbols. Also, the RAM of your computer will be clogged with a history of quotes of 998 unnecessary symbols. To reduce the list of symbols, first open the symbols on the chart you are working with, then simply right-click in the Market Watch window, and select Hide all symbols from the context menu.

2) I can say that the panel does not generate a message with the text "cant modify stops". If the modification did not pass, it means that the order is frozen, or you are using invalid parameters for modification, for example, you are trying to set a stop loss too close to the current price. You can find out exactly what the problem is by the entries on the Expert and Journal tabs of the terminal.

If this is not what you are writing about, please provide more information, describe what actions this happens with, take a screenshot of the breakeven settings, order parameter, message, and the Expert and Journal tabs of the terminal.

Hello,

1) you use virtual stop loss and take profit. More information about virtual stop loss and take profit can be found here. Specifically for your case, I can say that:

- virtual stop loss and take profit are stored in the panel and executed by the panel. There is no information about virtual stop loss and take profit on the trading server, and accordingly your broker cannot know about their existence.

- when using virtual stop loss and take profit, you should pay attention to their disadvantages, namely, the order is closed by the stops performed by the panel, therefore, when closing the order, the closing price may slip, that is, if the price moves quickly, closing may occur at an unfavorable price.

2) if your total loss is greater than the calculated one, then first of all you need to compare the closing price of the order with the stop loss price, most likely you have price slippage.

3) virtual stop loss and take profit are modified only from the order control panel.

4) I think that you accidentally enabled virtual stop loss and take profit, and therefore the solution to your problem is simply to disable virtual stop loss and take profit. To do this, disable this checkbox:

Hello,

in order to change or add a breakeven (purple line) press button 1 and you will go to the breakeven settings.

in order to change or add partial closure, press button 2 and you will go to the partial closure settings.

In this case, the labels for opening orders will not disappear from the chart, and the panel will be waiting for an order to be opened.

Здравствуйте, такой функции нет. Попробуйте использовать этот чекбокс:

если вы снимете эту галочку, то метки стоп лосс и тейк профит не будут двигаться за ценой. 

Как перейти к этим настройкам смотрите здесь.

Отлично, спасибо

Hello there,

I do not see where I can add in the panel the number of trade by click (seen on the video) can you point me where I can add this settings please ?

Thanks in advance,

Hello, this needs to be enabled in the settings. In order for the panel to open a series of orders, you need to specify how the panel will calculate the lot for a series of orders.