Make 3 separate EA's

MQL4 Indicadores Asesores Expertos

Trabajo finalizado

Plazo de ejecución 3 días
Comentario del Cliente
did a job job!!! was fast as well!!
Comentario del Ejecutor
Nice working with him. Thank you!

Tarea técnica

Looking for 3 EA that works on the scotch, bollinger bands, moving average.


So I like the settings to for all 3 EA to be:


on/off:  (factory setting off)


Lot: (factory setting .01 but able to custom)

Risk (set at .02% able to custom %  "the % goes off of the account balance")

Lot or Risk:(factory setting at "risk" you need to be able to choose if you want to do "lot" or "risk")


Stop loss: (factory setting at 25 pip but able to change it to what you want it to be)

Take profit: (factory setting at 250 pip but able to change it to what you want it to be)

SL/TP: (factory setting on but can be turn off)

Trail stop setting: (this is where you set the number of the trail stop factory setting 25 pip)

Trail stop: (factory setting off but can be turn on)

Trail stop even setting: ( factory setting 30 pip  but able to custom)

Trail stop even: (factory setting on but also can turn off )


" Trail stop even is basically a setting that if your set at 50 and a trade get to +50 pips the stop loss got to break even and do nothing else"


pause after message:(factory settings at 60 min but able to change it)

Pause after trade: :(factory settings at 600 min but able to change it)


time frames: (to work on all time frames but to be on current chart that is open)


EA 1:

-Bollinger bands-


Period: (factory settings at 20 but able to customize to what I want)

Deviation: (factory settings at 2 but able to customize to what I want)


Top band: (select one: message, buy, sell. factory setting message)

Break Pip: (to break by whatever custom number I wanted to be)

message top: (if message is on "custom writing spot this is what it's going to send me in the message")


Low band: (select one: message, buy, sell. factory setting message)

Break Pip: (to break by whatever custom number I wanted to be)

message low: (if message is on "custom writing spot this is what it's going to send me in the message")


"Example if you were to set the top band to break by 40 pip and message. Once it did it would message me to tell me the market was at that level or if I set it to break the lower band at -20 pip and to buy. Once it got to 20 pip below the lower band it would buy. This is where all the stop losses take profits and trail stops and lot or risk would all come into play"


EA 2:

-Scotch-


%K period: (factory setting 7 but able to customize as I want)

%D period: (factory settings 3 but able to customize wanted)

Slowing: (factory setting 3 but able to customize wanted)

Price field: (factory setting low/high all standard settings available to pick from)

Ma method: (factory settings simple all standard settings available to pick from)

Levels 1: (factory setting 80% but able to custom)

Level 2: (factory settings 20% but able to custom)


Action: (select one: message or Trade factory settings Trade)

message top: (if message is on "custom writing spot this is what it's going to send me in the message")

message low: (if message is on "custom writing spot this is what it's going to send me in the message")


"example after the line has entered into the upper level and once it breaks below the upper level it will sell/"trade" or message whatever is selected then This is where all the stop losses take profits and trail stops and lot or risk would all come into play or after the line has entered into the lower level and once it breaks above the lower level it will buy/"trade" or message"


EA 3

-Moving average-


-Line 1-

Period: (factory settings 10 but able to customize )

Ma method: (factory settings simple but all standard selections to choose from)

Apply to:(factory settings close all standard selections to choose from)

-Line 2-

Period: (factory settings 40 but able to customize)

Ma method: (factory settings simple but all standard selections to choose from)

Apply to:(factory settings close all standard selections to choose from)


Action: (choose one: trade or message factory settings trade)

message up: (if message is on "custom writing spot this is what it's going to send me in the message")

message down: (if message is on "custom writing spot this is what it's going to send me in the message")


"Example when line 1 moved above line 2 it buys or messages whatever is selected This is where all the stop losses take profits and trail stops and lot or risk would all come into play

or the opposite when line 1 moved  below line 2 it would sell or messages 


Note- I use MT4 and it is 3 separate EA and when you load a EA it will put the correct indicators on the chart so for a  Example if you are use  Moving average EA it would put the moving average indicators on the chart it on also all EA's must be able to work on the strategy tester on MT4 

Thanks 


Han respondido

1
Desarrollador 1
Evaluación
(24)
Proyectos
26
42%
Arbitraje
1
0% / 100%
Caducado
2
8%
Libre
2
Desarrollador 2
Evaluación
(53)
Proyectos
74
26%
Arbitraje
30
10% / 63%
Caducado
22
30%
Libre
3
Desarrollador 3
Evaluación
(772)
Proyectos
1039
44%
Arbitraje
50
8% / 50%
Caducado
116
11%
Libre
4
Desarrollador 4
Evaluación
(23)
Proyectos
53
9%
Arbitraje
10
20% / 60%
Caducado
11
21%
Libre
Ha publicado: 6 ejemplos
5
Desarrollador 5
Evaluación
(221)
Proyectos
369
66%
Arbitraje
10
50% / 0%
Caducado
46
12%
Libre
6
Desarrollador 6
Evaluación
(87)
Proyectos
114
26%
Arbitraje
7
29% / 57%
Caducado
5
4%
Libre
Solicitudes similares
Version document : 1.0 Plateforme : TradingView Langage : Pine Script v6 Type : Indicateur d'analyse et d'aide à la décision (non-exécutant) 1. Présentation du projet Nom du produit ONYX SR V2 — Intelligent Support & Resistance Scalping System Objectif Créer un indicateur TradingView capable d'identifier automatiquement des opportunités de scalping basées sur : supports et résistances dynamiques ; action du prix ;
I have a EA/indicator that I want built. I should say 1st off dont know how to code myself so I will be using AI to verify that the source code is complete and matches the documents spec or if better so if you can not truly do the job do not waste either of out time. This is a idea I came.up wit and used AI to produce a framework for it.... and of course AI isn't 100% accurate so I need a knowledgeable quantitative
TumiiFX 30 - 20000 USD
1. Use two EMAs: 20 and 50. If EMA 20 is above EMA 50 → uptrend (look for buys) If EMA 20 is below EMA 50 → downtrend (look for sells) 2. Wait for a pullback into the area between the two EMAs. - For buys: price must touch or move between EMA 20 and EMA 50 during the last few candles. - For stils: same idea, but in a downtrend. 3. Entry signal: Buy: a bullish engulfing candle in an uptrend after the pullback
I am looking for an experienced MQL4 developer to build a professional High-Frequency Trading (HFT) / Low-Latency Expert Advisor for MetaTrader 4 (MT4) . The EA will be deployed on an IC Markets Live account and should be optimized for the fastest possible execution using a low-latency VPS located in LD4 or NY4 . The primary instruments will be US30 and XAUUSD (Gold) . The goal is to create an EA capable of
A robot 50+ USD
HIGH-FREQUENCY M5/M15 CONCURRENT ENTRY SNIPER import time class HighFrequencySniper: def __init__(self): self.target_profit = 25.00 # Targeted Delta Move self.max_execution_time = 3600 # 1 Hour Sandbox (Seconds) self.lot_allocation = "CALIBRATED_TO_RISK" def execute_hft_scan(self, current_price, m5_rsi, m15_order_block): print(f"[SCANNING] Current Kernel Metric: ${current_price:.2f
I need a trading bot, please i need this project urgently and when messaing me kindly send me samples of past works and dont forget i need the project to be done as soon as possible
A lightweight MT5 chart overlay displaying total floating P&L, average entry price, combined lot size, and current symbol exposure as a percentage of account balance, all updating in real time with color-coded profit/loss indicators, delivered with clean object-oriented source code and no DLL dependencies
QUIERO CONSEGUIR EL CODIGO FUENTE DE ESTE INDICADOR QUE ME GUSTA MUCHO TAMBIEN TIENE EL NOMBRE DE ET BANDS O ENTRY EXIT TIMING . no se los componentes pero estas son las imagenes. que mejor lo describen
I am looking to convert my existing TradingView Pine Script (v5) strategy into an MQL5 Expert Advisor (EA) for MetaTrader 5. Strategy Details: Asset: Gold (XAUUSD) Timeframe: 15-minute Strategy Logic: The strategy is based on a breakout concept. Anchor Candle: The base calculation starts from the Specified Candle Entry Window: The EA should only look for entries As Per Indicator Risk Management: The strategy
I want to find a Developer to perform this work and settle payments in this Application. I undertake not to communicate with Applicants anywhere else except this Application, including third-party messengers, personal correspondence or emails. I understand that violators will be banned from publishing Orders in the Freelance

Información sobre el proyecto

Presupuesto
30 - 60 USD
Plazo límite de ejecución
de 1 a 10 día(s)