Make 3 separate EA's

MQL4 Indicators Experts

Job finished

Execution time 3 days
Feedback from customer
did a job job!!! was fast as well!!
Feedback from employee
Nice working with him. Thank you!

Specification

Looking for 3 EA that works on the scotch, bollinger bands, moving average.


So I like the settings to for all 3 EA to be:


on/off:  (factory setting off)


Lot: (factory setting .01 but able to custom)

Risk (set at .02% able to custom %  "the % goes off of the account balance")

Lot or Risk:(factory setting at "risk" you need to be able to choose if you want to do "lot" or "risk")


Stop loss: (factory setting at 25 pip but able to change it to what you want it to be)

Take profit: (factory setting at 250 pip but able to change it to what you want it to be)

SL/TP: (factory setting on but can be turn off)

Trail stop setting: (this is where you set the number of the trail stop factory setting 25 pip)

Trail stop: (factory setting off but can be turn on)

Trail stop even setting: ( factory setting 30 pip  but able to custom)

Trail stop even: (factory setting on but also can turn off )


" Trail stop even is basically a setting that if your set at 50 and a trade get to +50 pips the stop loss got to break even and do nothing else"


pause after message:(factory settings at 60 min but able to change it)

Pause after trade: :(factory settings at 600 min but able to change it)


time frames: (to work on all time frames but to be on current chart that is open)


EA 1:

-Bollinger bands-


Period: (factory settings at 20 but able to customize to what I want)

Deviation: (factory settings at 2 but able to customize to what I want)


Top band: (select one: message, buy, sell. factory setting message)

Break Pip: (to break by whatever custom number I wanted to be)

message top: (if message is on "custom writing spot this is what it's going to send me in the message")


Low band: (select one: message, buy, sell. factory setting message)

Break Pip: (to break by whatever custom number I wanted to be)

message low: (if message is on "custom writing spot this is what it's going to send me in the message")


"Example if you were to set the top band to break by 40 pip and message. Once it did it would message me to tell me the market was at that level or if I set it to break the lower band at -20 pip and to buy. Once it got to 20 pip below the lower band it would buy. This is where all the stop losses take profits and trail stops and lot or risk would all come into play"


EA 2:

-Scotch-


%K period: (factory setting 7 but able to customize as I want)

%D period: (factory settings 3 but able to customize wanted)

Slowing: (factory setting 3 but able to customize wanted)

Price field: (factory setting low/high all standard settings available to pick from)

Ma method: (factory settings simple all standard settings available to pick from)

Levels 1: (factory setting 80% but able to custom)

Level 2: (factory settings 20% but able to custom)


Action: (select one: message or Trade factory settings Trade)

message top: (if message is on "custom writing spot this is what it's going to send me in the message")

message low: (if message is on "custom writing spot this is what it's going to send me in the message")


"example after the line has entered into the upper level and once it breaks below the upper level it will sell/"trade" or message whatever is selected then This is where all the stop losses take profits and trail stops and lot or risk would all come into play or after the line has entered into the lower level and once it breaks above the lower level it will buy/"trade" or message"


EA 3

-Moving average-


-Line 1-

Period: (factory settings 10 but able to customize )

Ma method: (factory settings simple but all standard selections to choose from)

Apply to:(factory settings close all standard selections to choose from)

-Line 2-

Period: (factory settings 40 but able to customize)

Ma method: (factory settings simple but all standard selections to choose from)

Apply to:(factory settings close all standard selections to choose from)


Action: (choose one: trade or message factory settings trade)

message up: (if message is on "custom writing spot this is what it's going to send me in the message")

message down: (if message is on "custom writing spot this is what it's going to send me in the message")


"Example when line 1 moved above line 2 it buys or messages whatever is selected This is where all the stop losses take profits and trail stops and lot or risk would all come into play

or the opposite when line 1 moved  below line 2 it would sell or messages 


Note- I use MT4 and it is 3 separate EA and when you load a EA it will put the correct indicators on the chart so for a  Example if you are use  Moving average EA it would put the moving average indicators on the chart it on also all EA's must be able to work on the strategy tester on MT4 

Thanks 


Responded

1
Developer 1
Rating
(24)
Projects
26
42%
Arbitration
1
0% / 100%
Overdue
2
8%
Free
2
Developer 2
Rating
(53)
Projects
74
26%
Arbitration
30
10% / 63%
Overdue
22
30%
Free
3
Developer 3
Rating
(769)
Projects
1033
44%
Arbitration
50
8% / 50%
Overdue
117
11%
Free
4
Developer 4
Rating
(23)
Projects
53
9%
Arbitration
10
20% / 60%
Overdue
11
21%
Free
5
Developer 5
Rating
(221)
Projects
369
66%
Arbitration
10
50% / 0%
Overdue
46
12%
Free
6
Developer 6
Rating
(87)
Projects
114
26%
Arbitration
7
29% / 57%
Overdue
5
4%
Free
Similar orders
greetings, i need to optimize a source code with hedging when the DD go upper X% or with another type of optimization, like setting a new stop loss or other. so, i need a optimizion of a existing ea i will send you the files and i would have an explanation of what you can do about it
Hi like this post : MADdash (Moving Average Distance) source code - an order to develop the technical indicator at MQL5.community Freelance service - Budget: 30+ USD - MQL4 - Indicators, Experts and MADdash (Moving Average Distance) | Forex Factory i need the same indicator than MADdash dashboard (cf screenshot) where i could choose tf & MA charistics but with theses modifications : 1) in text of TF header need the
Hi there, I need a very skilled EA developer to work on my project. Use your own best skills & strategies to develop the best EA. EA must never take trades during market consolidations. But wait until there's a signal for a particular trend & take supper sniper entries & exits. Once the daily TP is hit(10$-12$), EA must stop trading for that day & wait for the next day. Unless there's a strong trend. If the
However, i want this 'game' i.e. Cosine to receive trading data from cTrader to train on and then send it's 'Predictions' back to cTrader like in the following project . I will send the requirements in the chat bot
Currently my mt5 ea is working on fine . there is two version need this in both . There will be no change in display working .(one order at a time ) Order start with automate mode or manual mode only first order is consider from here . After that if tp is hit then reversal lot will start on every tp . and if sl is hit lot increment will start . There is three type of lot increment . example if Fibonacci selected
can you build me a bot base on this strategy please The term "MartiScalper robot" likely refers to a type of automated trading system that combines two different trading strategies: Martingale and Scalping. Here's a breakdown of these strategies: 1. **Martingale Strategy**: This is a betting strategy that involves doubling the trade size after a loss, with the idea that an eventual win will recover all previous
In an existing EA (MT4) I need to insert a new feature and delete a couple of un-utilised features. Please let me know if anyone can do the job. Thanks
Hi, I need an EA to read alerts provided by my MT4 indicator and send to my Binary Options Telegram Channel. The message should be like the example below (with emojis): 🎩 SIGNAL ALERT🎩 ⏳ Timeframe: M5 💰 Pair: GBPJPY ⏰ Entry: 14:55 📊 Order: PUT 🐣 1 GALE I should be able to choose to send the signal for the next candle or for the same candle. Each signal message should be replied with one of the 4 possible
Only if you can deliver immediately today I just need a file that can close manual trade I opened example if I open trade manually what the file does is to close all open position once hit my profit target and I can set maximum dd the account can have it will have maximum dd by % and by $ option if I set maximum dd to $500 that’s if i choose $ option then once account is on exactly -$500 let the file close all open
The assignment Apply both Bheurekso Pattern and TMA centered Bands on the Charts. The EA opens orders as bullish and bearish arrows appears at the certain level. Not all arrows triggers an order. The indicators are attached here for you to test them. SETTINGS Magic Number: 0001 (default) Order type: Buy only or Sell only and Buy & Sell Lot Size : 0.2 (default) True/fasle TP: Pip Value True/fasle TP: When the price

Project information

Budget
30 - 60 USD
For the developer
27 - 54 USD
Deadline
from 1 to 10 day(s)