Todos los encargos
Reglas
Mira cómo encargar de forma rápida un robot comercial
Lea las reglas antes de empezar el trabajo
Cómo encargar un robot comercial en MQL5 y MQL4
Mire el ejemplo de Tarea Técnica para encargar un robot
Nuevas solicitudes en la categoría:
100 - 300 USD
30 - 100 USD
50 - 300 USD
30 - 200 USD
30+ USD
Tarea técnica
Requirements for an Expert Advisor that reads messages from a Telegram group and place trades according to it:
- The EA basically needs to read messages containing trading instructions during the day that are posted in a Telegram group,
and place market orders, stop or limit orders according to it, and manage the open trades according to more messages that arrives during the
day, saying to add average orders, add breakeven, take profit, stop gain, stop loss and close the order. If it does not identify a TP, SL or
another needed condition, it will set the standard inputs set by the user on it.
This may be performed in a hedge account type, so please leave to option to work with multiple positions, because we will have averaging.
Another requirement are that the Take Profits shall be Limit Orders, to avoid slippage. If using hedge account option, then the EA will use the
Close By function to close the orders in case the TP is hit.
- I will be trading at a local centralized exchange in my country, and the messages are in local language, but don´t worry. The user will type
in the EA settings what are the possible words for each function.
I´ll type below some examples of words and combination of words to look for. It can be changed, reduced or added by the user of course:
- The key combination of words that it needs to read on the message to understand what it has to do are:
1 - If it reads "compra" and "mercado", or "alta" and "mercado", it means "buy" and
"market", so the EA must place a Buy trade at market
(These words can be separated with another words in the middle, so the EA can ignore words that it does not recognize on each line, but usually they
don´t mean any extra thing).
1.1 - In this same message, or the next one, it also usually says the size of the Take Profit
which could be for example: "50" and "pontos" (or just "50" alone, without saying "pontos", the user can set if it is a combination of
words or just one, and they may not be in a sequence), which means "50" and "points" in this case.
TP for Market Orders are usually 100 points if it is not stated. But if it is stated, then the EA, after identifying the "compra" and
"mercado", it shall look for the TP by searching for a number with 2 or 3 digits maximum, followed by the word "pontos" or not.
The message may have the word "ganho", "lucro" or "gain" (gain in English too) after the "50 pontos" for example. So this can be left as an
option for the user to define if the EA shall also look for the word "gain" or not to identify the TP.
If the EA cannot find the TP, or if the user chooses not to find a TP for this type of order, then it can use a standard TP for market orders set by
the user.
2 - If it reads "venda" and "mercado", or "queda" and "mercado", it means "sell" and
"market", so the EA must place a Sell trade at market
(These words can be separated with another words in the middle, but usually they doné mean any extra thing).
2.1 - In this same message, or the next one, it also usually says the size of the Take Profit and
for example "50" and "pontos" (may not be in a sequence), which means "50" and "points" in this case.
TP for Market Orders are 50 points if it is not stated. But if it is stated, then the EA, after identifying the "venda" and "mercado",
it shall look for the TP by searching for a number with 2 or 3 digits maximum, followed by the word "pontos" or whatever word is set by the user.
The message may have the word "ganho", "lucro" or "gain" (gain in English too) after the "50 pontos" for example. So this can be left as an
option for the user to define if the EA shall also look for the word "gain" or not to identiry the TP.
If the EA cannot find the TP, or if the user chooses not to find a TP for this type of order, then it can use a standard TP for market orders set by
the user.
3 - If the message says "compra" (buy) or "venda" (sell) and then a 4 or 5 digit number (it can
have another words between them) and/or says "start" or "limite", it means to place a trade at an specific price point.
In this case we can have 4 scenarios that I will show as examples below:
"compra" or "alta" (buy) and a number as "100200", considering as an example that
the current price of the asset is 100000. So this will mean that the EA needs to place a Buy Stop Order at the price of 100200.
"compra" or "alta" (buy) and a number as "98800", considering as an example that
the current price of the asset is 100000. So this will mean that the EA needs to place a Buy Limit Order at the price of 98800.
"venda" or "queda" (sell) and a number as "100200", considering as an example that
the current price of the asset is 100000. So this will mean that the EA needs to place a Sell Limit Order at the price of 100200.
"venda" or "queda" (buy) and a number as "98800", considering as an example that
the current price of the asset is 100000. So this will mean that the EA needs to place a Sell Stop Order at the price of 98800.
3.1 - If one of the conditions above happens, then the EA after opening one of the types above,
shall look at the same message, or next one, for the gain or stop loss.
3.1.1 - The gain can be identified in the case by the word "gain", "ganho" or "lucro" or
whatsoever the user wants and a quantity of points "for example, 500" or a 4 or 5 digit number, stating where the TP will be located.
The user can also have the option to manually set a gain in points for this type of order.
If the EA does not find a 4 or 5 digit number, but a 2 or 3 digit number, than that will be the number of points for the gain from the order opening
price, obeying the same condition as itens 1.1 and 2.1 above.
3.1.2 - The stop loss can be identified in the case by the word "stop" and a 4 or 5 digit number,
stating where the SL will be located.
If the EA does not find a 4 or 5 digit number, but a 2 or 3 digit number, than that will be the number of points for the SL from the order opening
price, obeying the same condition as itens 1.1 and 2.1 above.
The user can also have the option to set a Stop Loss in points for this type of order.
4 - Trading on Market Auction: The EA can also trade just right after the Market Auction,
when it opens everyday. The Market Auction starts at 8:55 and we will have a bid>ask condition. The Auction can go on until
the price is defined (usually at 9:00~9:05 server time). So while bid>ask, we can received messages that will say if we must buy ("compra"
ou "alta") or if we must sell ("venda" or "queda"), but no order shall be placed until the auction is over (bid<ask) and the trading
starts.
In this case we will trade market orders only. Take Profit is usually set at 125 points (or set by the user).
and the Stop Loss at 250 points (or set by the user).
4.1 - During the Auction or just after it happened, we may receive messages with the word
"arrastar" (slide or move in English) ou "arrasta" ou "arraste" and a 4 o 5 digit number, which will mean that the EA needs to
move the current buy limit or sell limit order to that new position. The TP and SL will move along too as expected.
In sum, there are basically 3 important features:
1 - Leave an option for the user to change the words the EA needs to read for each type of trade function,
in a field and separated by comma or another sign. For example, for the function of buy at market order,
we have "compra" and "mercado", so in this field we would have compra;mercado;.
But if the user wants it can change the words to look for, add or reduce the number of words to look for.
For example, he could change to "alta" and "agora" by typing alta;agora; or add a third word to look for,
like alta;mercado;agora;. The user needs to be free to set the words he wants the program to look for all the types of operation above.
2 - We must have a Panel to support the user on ths risk management settings and trade settings. In this panel he needs to see and be able to modify:
2.1- Size of Standard TP;
2.2- Size of Standard SL;
2.3 - Risk Size of the trade, with 3 options:
2.3.1 - Set by an amount of money for a defined TP. In this case the Lot/Contract size is calculated according to the TP size and the amount of money the user wants to win. For example, if the TP is 100 points, and the contract value of each tick/point is 0.2 USD, and the user wants to win 100 USD in case it hits the TP, then the EA calculates 100 USD / (100 pt x 0.2) = 5 Lot/Contracts for the next trade.
2.3.2 - Set by an amount of money for a defined SL. In this case the Lot/Contract size is calculated according to the SL size and the amount of money the user wants to win. For example, if the SL is 500 points, and the contract value of each tick/point is 0.2 USD, and the user wants to lose nor more than 100 USD for each trade single in case it hits the SL, then the EA calculates 100 USD / (500 pt x 0.2) = 1 Lot/Contracts for the next trade.
2.3.3 - Set just by a single Lot/Contract for any position, entered by the user.
2.4 - Result in money of Todays Trades;
2.5 - Result in money for this week Trades;
2.6 - Result in money for this month Trades;
2.7 - Daily profit target set in money, which after it reachs the EA stops trading for the day.
2.8 - Daily loss tardet set in money, which after it reachs the EA stops trading for the day.
2.9 - Trailing Start: Define a trailing start point, which after the EA will move the SL of the order according to it. If more orders are
opened due to averaging, the EA will use the average price of all positions accordingly.
2.10- Trailing Stop: Define the price of the trailed SL from the current price to move. If more orders are opened due to averaging, the EA will use the average price of all positions accordingly.
3 - Option to request confirmation of the user before placing any trade. So in case there is a new Telegram message with a signal, the EA will open a pop-up with the signal information it was able to detect, and asking if the user wants to proceed and open the trade. It also have an option to send a push notification for each pop-up opened, or action done by the EA, and the result of a trade/trades when it is closed.
How to do the averaging:
- If we have an open order, and a new message is received with a "compra" (buy) or "venda" (sell) and the word "mercado" (market) or
the word "mais" (more),
it means an instruction to open another order of the same type of the current order, averaging the position. Up to 6 can be opened (it can be set
by the user).
So after receiving instructions to open a buy or sell averaging order at market, the EA must calculate the average position, and correct the
TPs and SLs of the opened orders according to it.
The TP can also change if an order starts to be averaged, so in case in same message that opened the averaging order, or the next message, it
shows a 2 or 3 digit number and the word "gain", "ganho" or just a 2 or 3 digit number like "50" or "100",
then the TPs can be set to this new instructed position. The averaging TPs can also be set by the user. The user can set if SL will be recalculated
considering all opened positions, setting a new SL for the average position, or if it will keep the old SL for all new opened positions.
Other words that may appear on new messages that will also cause actions in the EA:
- If the EA reads the word "Stopou" in a new message, it means that the trade (and averaging trades) were closed with a stop loss. If
the current trade wasn´t already closed or reached the stop loss,
the EA can close the order and averaging orders immediately after reading the word "Stopou". this word can be set by the user.
- If the EA reads the word "gain" or another word set by the user alone in a new message, it means that the trade (and averaging trades)
were closed with a gain.
If the current trade wasn´t already closed or reached the take profit, the EA can close the order and averaging orders immediately after
reading the "gain" words above.
- if the EA reads the word "stop gain" or "0x0" or "0 x 0", it means that the EA will need to set a break even on the current trade or
averaging position trades.
The trigger to set the breakeven in points, if the EA read one of the words above, can be set by the User, and the breakeven position can be 5
points or set by user as well.
That´s it. I tried my best to explain it all so it got a little big in text, but it is simple EA. Please fell free to ask for any clarification. Thanks!
Han respondido
1
Evaluación
Proyectos
134
14%
Arbitraje
41
22%
/
29%
Caducado
14
10%
Libre
2
Evaluación
Proyectos
287
52%
Arbitraje
0
Caducado
1
0%
Libre
3
Evaluación
Proyectos
34
15%
Arbitraje
2
0%
/
50%
Caducado
8
24%
Libre
Solicitudes similares
👋 hello great developer am looking for expert to help me with convert with this 2 pine script indicator into mt4 indicator? I will be looking for great developer to bid for this project. Best regards
I need smart, professional, and fast programmer for doing this project quickly, that have experience in EA with minimum 200 projects finish and without arbitration, and have good review and reputation from their client Share your link review, if you not qualified, dont apply! I will bidding the programmer from experience, review, reputation, price, and days working My EA using Moving Average, Average True Range, and
PSAR modification
30+ USD
I have a PSAR MTF indicator (mq4 file), and a second PSAR MTF indicator (unfortunately only an .ex4 file). The latter contains the function I need. Unfortunately, this is closed code and cannot be modified. However, this will serve as an example of what I need. I need to expand the indicator (.mq4) Step and maximum can only be set once I want to be able to set step and maximum for each time frame (like you can do in
I need EA base on two indicator only
50 - 80 USD
I NEED EA BASE ON TWO INDICATOR ONLY SMART MONEY CONEPT BY LOX-ALGO AND MARKET STRUCTURE BRAEK & ORDER BLOCK BY Emrekb the two indicator are in trading view Please if you can do the job reply and let me know thanks please go and check out the two indicator then let me know
DEVELOPING AN EA BASED ON HEDGE
36+ USD
Hello, I want a trading robot based on Martingale and Hedge. The EA is very simple to code and does not require a lot of knowledge in programming. I will describe the functions of EA when we will work together
I'm searching for someone with expertise in ICT and market structure to transform this Pine Script code into a buy and sell indicator, or potentially a trading robot, delivered with source code and You can work on prop farm. 1) Market Structure with Inducements & Sweeps [LuxAlgo] 2) ICT Concepts [LuxAlgo]
Not sure if you’re familiar with the backtesting software (Forex Tester.) They require you to upload experts in DLL format. They won’t accept MQL4. Would you be able to convert my expert advisor (MQ4 format) into DLL? It’s a simple MQ4 to DLL conversion
Require RENKO based Strategy developer for MT4 and MT5 EA looking for a developer who can Design EA MT4 and MT5 (Both) as per my RENKO based Strategy Strategy: based on RENKO chart Main Inputs: CYCLE SETTINGS BREAK EVEN SETTINGS LOT SIZE SETTINGS TP, SL, TS SETTINGS ADX and DI INDICATOR SETTINGS EQUITY PROTECTOR SETTINGS CUSTOM TRADING SESSION TIMES HIGH IMPACT NEWS FILTER
Convert from pine script to MT4 in 2 days
40 - 60 USD
Hello there, I need a developer that can help me convert 2 TradingView pinescripts into MT4 in 2 days. I need this to be perfectly converted and as soon as possible. Thanks
MT4 HFT Wick Candle Strategy
100 - 300 USD
MT4 HFT Wick Candle Strategy US30 & XAUUSD Opens 1 trade at a time 1min timeframe Trade Type: Market, Pending, Limit, Cancel, etc Filter by slow, sideways, or fast market MT4API integration buy condition - if a candle is green with less than X amount of pips wick it will execute buy trade EA will have function to set the wick size. So if i put 10 then EA will execute buy trade only if the green candle has wick
Información sobre el proyecto
Presupuesto
72+ USD
Para el ejecutor
64.8
USD