[存档]任何菜鸟问题，为了不使论坛变得杂乱无章。专业人士，不要路过。没有你就无处可去 - 3. - MQL4和MetaTrader 4 - MQL4 算法交易论坛

Victor Nikolaev 2011.09.22 16:43 #2031

skyjet:
这不是一个嵌套函数，而是基本MACD样本EA的一部分。我正试图增加一个计算好的地段。主要和唯一的start()函数

那么，你需要看一下整个代码。你所展示的是函数

noobys 2011.09.22 16:48 #2032

在那里 :)我只是不知道如何装入上述的地段计算。

//+------------------------------------------------------------------+
//|                                                  MACD Sample.mq4 |
//|                      Copyright © 2005, MetaQuotes Software Corp. |
//|                                       http://www.metaquotes.net/ |
//+------------------------------------------------------------------+

extern double TakeProfit = 50;
extern double Lots = 0.1;
extern double TrailingStop = 30;
extern double MACDOpenLevel=3;
extern double MACDCloseLevel=2;
extern double MATrendPeriod=26;

//+------------------------------------------------------------------+
//|                                                                  |
//+------------------------------------------------------------------+
int start()
  {
   double MacdCurrent, MacdPrevious, SignalCurrent;
   double SignalPrevious, MaCurrent, MaPrevious;
   int cnt, ticket, total;
// initial data checks
// it is important to make sure that the expert works with a normal
// chart and the user did not make any mistakes setting external 
// variables (Lots, StopLoss, TakeProfit, 
// TrailingStop) in our case, we check TakeProfit
// on a chart of less than 100 bars
   if(Bars<100)
     {
      Print("bars less than 100");
      return(0);  
     }
   if(TakeProfit<10)
     {
      Print("TakeProfit less than 10");
      return(0);  // check TakeProfit
     }
// to simplify the coding and speed up access
// data are put into internal variables
   MacdCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,0);
   MacdPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,1);
   SignalCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,0);
   SignalPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,1);
   MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0);
   MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1);

   total=OrdersTotal();
   if(total<1) 
     {
      // no opened orders identified
      if(AccountFreeMargin()<(1000*Lots))
        {
         Print("We have no money. Free Margin = ", AccountFreeMargin());
         return(0);  
        }
      // check for long position (BUY) possibility
      if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious &&
         MathAbs(MacdCurrent)>(MACDOpenLevel*Point) && MaCurrent>MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice());
           }
         else Print("Error opening BUY order : ",GetLastError()); 
         return(0); 
        }
      // check for short position (SELL) possibility
      if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && 
         MacdCurrent>(MACDOpenLevel*Point) && MaCurrent<MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_SELL,Lots,Bid,3,0,Bid-TakeProfit*Point,"macd sample",16384,0,Red);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice());
           }
         else Print("Error opening SELL order : ",GetLastError()); 
         return(0); 
        }
      return(0);
     }
   // it is important to enter the market correctly, 
   // but it is more important to exit it correctly...   
   for(cnt=0;cnt<total;cnt++)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if(OrderType()<=OP_SELL &&   // check for opened position 
         OrderSymbol()==Symbol())  // check for symbol
        {
         if(OrderType()==OP_BUY)   // long position is opened
           {
            // should it be closed?
            if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious &&
               MacdCurrent>(MACDCloseLevel*Point))
                {
                 OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position
                 return(0); // exit
                }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if(Bid-OrderOpenPrice()>Point*TrailingStop)
                 {
                  if(OrderStopLoss()<Bid-Point*TrailingStop)
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green);
                     return(0);
                    }
                 }
              }
           }
         else // go to short position
           {
            // should it be closed?
            if(MacdCurrent<0 && MacdCurrent>SignalCurrent &&
               MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDCloseLevel*Point))
              {
               OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position
               return(0); // exit
              }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if((OrderOpenPrice()-Ask)>(Point*TrailingStop))
                 {
                  if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0))
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red);
                     return(0);
                    }
                 }
              }
           }
        }
     }
   return(0);
  }
// the end.

Victor Nikolaev 2011.09.22 17:09 #2033

skyjet: 在那里 :)我只是不知道如何装入上述的地段计算。

//+------------------------------------------------------------------+
//|                                                  MACD Sample.mq4 |
//|                      Copyright © 2005, MetaQuotes Software Corp. |
//|                                       http://www.metaquotes.net/ |
//+------------------------------------------------------------------+

extern double TakeProfit = 50;
extern double Lots = 0.1;
extern double TrailingStop = 30;
extern double MACDOpenLevel=3;
extern double MACDCloseLevel=2;
extern double MATrendPeriod=26;

//+------------------------------------------------------------------+
//|                                                                  |
//+------------------------------------------------------------------+
int start()
  {
   double MacdCurrent, MacdPrevious, SignalCurrent;
   double SignalPrevious, MaCurrent, MaPrevious;
   int cnt, ticket, total;
// initial data checks
// it is important to make sure that the expert works with a normal
// chart and the user did not make any mistakes setting external 
// variables (Lots, StopLoss, TakeProfit, 
// TrailingStop) in our case, we check TakeProfit
// on a chart of less than 100 bars
   if(Bars<100)
     {
      Print("bars less than 100");
      return(0);  
     }
   if(TakeProfit<10)
     {
      Print("TakeProfit less than 10");
      return(0);  // check TakeProfit
     }
// to simplify the coding and speed up access
// data are put into internal variables
   MacdCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,0);
   MacdPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,1);
   SignalCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,0);
   SignalPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,1);
   MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0);
   MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1);

   total=OrdersTotal();
   if(total<1) 
     {
      // no opened orders identified
      if(AccountFreeMargin()<(1000*Lots))
        {
         Print("We have no money. Free Margin = ", AccountFreeMargin());
         return(0);  
        }
      // check for long position (BUY) possibility
      if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious<SignalPrevious &&
         MathAbs(MacdCurrent)>(MACDOpenLevel*Point) && MaCurrent>MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_BUY,Lots(),Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice());
           }
         else Print("Error opening BUY order : ",GetLastError()); 
         return(0); 
        }
      // check for short position (SELL) possibility
      if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious && 
         MacdCurrent>(MACDOpenLevel*Point) && MaCurrent<MaPrevious)
        {
         ticket=OrderSend(Symbol(),OP_SELL,Lots(),Bid,3,0,Bid-TakeProfit*Point,"macd sample",16384,0,Red);
         if(ticket>0)
           {
            if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice());
           }
         else Print("Error opening SELL order : ",GetLastError()); 
         return(0); 
        }
      return(0);
     }
   // it is important to enter the market correctly, 
   // but it is more important to exit it correctly...   
   for(cnt=0;cnt<total;cnt++)
     {
      OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
      if(OrderType()<=OP_SELL &&   // check for opened position 
         OrderSymbol()==Symbol())  // check for symbol
        {
         if(OrderType()==OP_BUY)   // long position is opened
           {
            // should it be closed?
            if(MacdCurrent>0 && MacdCurrent<SignalCurrent && MacdPrevious>SignalPrevious &&
               MacdCurrent>(MACDCloseLevel*Point))
                {
                 OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position
                 return(0); // exit
                }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if(Bid-OrderOpenPrice()>Point*TrailingStop)
                 {
                  if(OrderStopLoss()<Bid-Point*TrailingStop)
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*TrailingStop,OrderTakeProfit(),0,Green);
                     return(0);
                    }
                 }
              }
           }
         else // go to short position
           {
            // should it be closed?
            if(MacdCurrent<0 && MacdCurrent>SignalCurrent &&
               MacdPrevious<SignalPrevious && MathAbs(MacdCurrent)>(MACDCloseLevel*Point))
              {
               OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position
               return(0); // exit
              }
            // check for trailing stop
            if(TrailingStop>0)  
              {                 
               if((OrderOpenPrice()-Ask)>(Point*TrailingStop))
                 {
                  if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0))
                    {
                     OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red);
                     return(0);
                    }
                 }
              }
           }
        }
     }
   return(0);
  }
// the end.

double Lots()
  {
   double lot;
   lot=(AccountFreeMargin()*AccountLeverage()*Risk)/(MarketInfo(Symbol(), MODE_LOTSIZE));
   lot=NormalizeDouble(lot,1);
   return(lot);
  }

情况是这样的

noobys 2011.09.22 17:17 #2034

Vinin:
情况是这样的。

谢谢你的帮助!

Victor Nikolaev 2011.09.22 17:26 #2035

skyjet:
谢谢你的帮助!

只有批量计算功能应该被普及

[Deleted] 2011.09.22 18:02 #2036

你好。

我是这个行业的一个初学者。所以我请求你的帮助。

这里有一段代码。

int start()
  {
  
    
   if(IsTesting())return;
 
      
    if (AccountBalance() < 111 ){
      Alert("Erorr Balance");
      return; 
      
    if (AccountNumber() != 11111){
      Alert("Error AccountNumber");
      return;}
      
   }

我想首先检查余额，如果少于111，则发出警报并返回，如果多于111，则检查账户号码，如果账户正确则进行交易，如果不正确则发出警报并返回...

但由于某些原因，只有当我删除AccountBalance或 AccountNumber 时，它才会单独完成。

可能是一个新的问题，但我错过了什么？

谢谢

Victor Nikolaev 2011.09.22 18:10 #2037

volodin_andrei:

你好。

我是这个行业的一个初学者。所以我请求你的帮助。

这里有一段代码。

我想首先检查余额，如果少于111，则发出警报并返回，如果多于111，则检查账户号码，如果账户正确则进行交易，如果不正确则发出警报并返回...

但由于某些原因，只有当我删除AccountBalance或 AccountNumber 时，它才会单独完成。

可能是一个新的问题，但我错过了什么？

谢谢

你试过托架（异形托架）吗？

int start()
  {
  
    
   if(IsTesting())return;
 
      
   if (AccountBalance() < 111 )
   {
       Alert("Erorr Balance");
       return(0); 
   }  
   if (AccountNumber() != 11111)
   {
       Alert("Error AccountNumber");
       return(0);
   }
   return(0);
}

有足够的括号，但在错误的地方

[Deleted] 2011.09.22 18:38 #2038

在你的帮助下，我对它进行了调整，但它无法编译，所以这里有一张截图，也许有一个额外的括号或....:(

DDFedor 2011.09.22 18:42 #2039

找到一个具有小括号跟踪功能的文本编辑器。

Всеволод 2011.09.22 18:47 #2040

Vinin:

如果在其他工具或其他EA中也有未结头寸呢？想一想你在写什么。

不幸的是，对条件的描述并不假装完整，没有完全披露 "第40个订单 "的概念。那么将EA中开立的订单数量保存在一个变量中，而不是使用标准函数，就会容易得多。在这种情况下，未决订单是一个单独的问题。

[存档]任何菜鸟问题，为了不使论坛变得杂乱无章。专业人士，不要路过。没有你就无处可去 - 3. - 页 204