MMM ADX and SAR
70 USD
Скачано демо:
327
Опубликован:
24 ноября 2017
Текущая версия:
1.11
Не нашли подходящего робота?
Закажите собственного
на бирже фрилансеров
Перейти на биржу
Закажите собственного
на бирже фрилансеров
Как купить торгового робота или индикатор
Запусти робота на
виртуальном хостинге
виртуальном хостинге
Протестируй индикатор/робота перед покупкой
Хочешь зарабатывать в Маркете?
Как подать продукт, чтобы его покупали
Вы упускаете торговые возможности:
- Бесплатные приложения для трейдинга
- 8 000+ сигналов для копирования
- Экономические новости для анализа финансовых рынков
Регистрация
Вход
Вы принимаете политику сайта и условия использования
Если у вас нет учетной записи, зарегистрируйтесь

Hi Andre,
Hi Sven,
I still don't have any published signal for 2 reasons:
Hi Sven,
I still don't have any published signal for 2 reasons:
Hi Andre,
Hi, thanks for renting it and for the observations. I will seriously take a look at the Double Lots function and take your suggestions and find a way of implementing them. If you don't want to increase risks I suggest you not to use that Double Lots function because it is Martingale mode.
Regards.
André
Hi André,
the double lot function is defenitely not working correct.
When enabled it will start only if you set TP via currency, which makes no sense with auto lot function.
Also it starts with 0.01 lot it should start always with the lots you defined in the settings.
I had run now the EA one week and it is not bad, only the sell positions often goes in a big los.
That comes from cause the EA often open a position when the Momentum is gone.
I have not found the correct settings that the EA open Positions a little bit earlier.
I used it on mostly on GBPUSD Pair this week.
Maybe you can have a look at this ?
What also would be nice if you can set TP for Buy and Sell positions separate.
Cheers
Sven
Hi André,
the double lot function is defenitely not working correct.
When enabled it will start only if you set TP via currency, which makes no sense with auto lot function.
Also it starts with 0.01 lot it should start always with the lots you defined in the settings.
I had run now the EA one week and it is not bad, only the sell positions often goes in a big los.
That comes from cause the EA often open a position when the Momentum is gone.
I have not found the correct settings that the EA open Positions a little bit earlier.
I used it on mostly on GBPUSD Pair this week.
Maybe you can have a look at this ?
What also would be nice if you can set TP for Buy and Sell positions separate.
Cheers
Sven
Hi, swen,
The double lots on gain will be fixed and I will release a new version, but it will take some time, perhaps 7 to 10 days till I have it published, because it has to pass the website moderatios. About the momentum, I will check it, but I think you should check the indicator's inputs. To find the best inputs I use the MT4 strategy tester on optimization mode. It takes a long time to process and find the best input values for you. I like it very much. In my computer it takes about 24 hours to find the best input values. Try that.
Your comments will always be wellcome. This way you help me to inprove this product.
Thanks.
André Tavares
Hi André,
that's good to hear :). With Optimization it is a good idea. I let it run now for the last 4 Months and see, what the best setting would be.
When you provide a new Version, can you draw the Arrows and TP (with dotted lines) in the Chart ? It would be good if they are still there,
even when change seetings in the EA. At the moment you can see only the Arrows where the EA opens a order and not the TP Point like you will
see in Visual Backtesting Mode, but also here after the Backtest runs trough, all Arrows and TP Points are deleted.
I think this is very usefull for have a look at the trades the EA made, otherwise you must do this manually in the Chart.
I saw EA's that will draw these objects and they are still available, even when you change settings in EA.
Best Regards and keep you updated
Sven
Hi André,
that's good to hear :). With Optimization it is a good idea. I let it run now for the last 4 Months and see, what the best setting would be.
When you provide a new Version, can you draw the Arrows and TP (with dotted lines) in the Chart ? It would be good if they are still there,
even when change seetings in the EA. At the moment you can see only the Arrows where the EA opens a order and not the TP Point like you will
see in Visual Backtesting Mode, but also here after the Backtest runs trough, all Arrows and TP Points are deleted.
I think this is very usefull for have a look at the trades the EA made, otherwise you must do this manually in the Chart.
I saw EA's that will draw these objects and they are still available, even when you change settings in EA.
Best Regards and keep you updated
Sven
Hi, Sven. I liked the suggestions. I will implement that for next versions, but at the moment the priority is to fix that problem from "Double Lots on Gain" functionality. Check for new version by next week.
Thanks for the Suggestions.
André Tavares.
Hi André,
that sounds excellent. Of course, i understand that you can not work on all at the same time.
These are only small things, the major thing is, that the EA Algorythm is working without an error.
All other is only nice to have ;).
Thanks for your understanding and help.
I will see, when i get a message that a new version is available and will make tests
immediatly. When everything works fine, i will put it on my live account and hopefully
get some Profit.
Cheers
Sven
Hi André,
i found also out, that there is a maybe a wrong thinking about opening orders.
For Example yor equitiy is 2000$ and you have entered for lot 1. When you have a 1:400 leverage you have
to spend a margin of 250$ per lot. If you then have set the EA to max 7 Orders you have a Margin of 1750$.
Your Free Margin is then only 250$ which you can think is easily taken when you have 7 Orders open and the
trades goes in the wrong direction first.
Maybe you have a better idea to prevent that, cause if the Free Margin is taken then you get a margin call or
you can loose everything cause the broker close the Positions.
Cheers
Sven
Hi André,
i found also out, that there is a maybe a wrong thinking about opening orders.
For Example yor equitiy is 2000$ and you have entered for lot 1. When you have a 1:400 leverage you have
to spend a margin of 250$ per lot. If you then have set the EA to max 7 Orders you have a Margin of 1750$.
Your Free Margin is then only 250$ which you can think is easily taken when you have 7 Orders open and the
trades goes in the wrong direction first.
Maybe you have a better idea to prevent that, cause if the Free Margin is taken then you get a margin call or
you can loose everything cause the broker close the Positions.
Cheers
Sven
Hi, Sven, good evening,
this EA is provided with the input "Minimum Equity Percentage to allow opening new orders". This way, if you set it's value to 95 percent, it will only trade if your equity is equal or greater than 95 percent because you must have some margin. If it does not help you I will think about creating a new input about risk management to protect your money.
regards,
André Tavares
We have new version published.
Remember: always use the MT4 strategy tester optimization to find the best input values before start trading.
HI I BOUGHT YOURS PRODUCT BUT I WANT TO USE AS INDICATORS PLEASE TELL ME HOW
Hi, thanks for purchasing it. This EA is provided with buit-in indicators and trades automatically as the indicators calculate and check prices trends.