Hi Mr. James.

Thank you for your comment.

I sent you a detailed reply via email. I'm looking forward to your reply sir.

Thank you for choosing our indicators.

Best regards.

SAYADI Ashref.

Trend screener is showing "N"

Please help

Hi sir.

Thank you for your comment.

Trend screener is showing "N" because your broker is using a suffix or a prefix with the pairs name.

1. Prefix like: ecEURUSD

At this case, the prefix is  ec

2. Suffix like:  EURUSDe

at this case, the suffix is e

Just open any chart and you will see what prefix or suffix your broker is using.

After You can add this suffix or prefix in the indicator setting the issue will be solved. There is an input in the indicator setting where you can write the suffix or the prefix based on your broker pairsnames.

If you didn't find the prefix or the suffix that your broker is using, please can you send me via Private message a screen-shot from any charts where I can see the pair name and I will tell you if your broker is using a suffix or prefix?

Please let me know your feedback, sir.

Best regards.

SAYADI Ashref.

Ok. Perfect Mr. Ali.

I sent you an email a detailed about this point.

Hi Sayadi,

I just purchased your product and must say that I'm thus far I'm impressed with the level of detail and how well you have organized everything, looks very nice thus far, will post again when I've had some actual trading experience with it. For now I have a few comments/suggestions if you don't mind...

1) Sometimes it can run a bit slow (my MT4 is pretty slow in general as I have a number of processor intensive indicators). Is there any way to pause the calculations its doing temporarily? Or maybe there could be

a parameter to define the frequency of updates?

2) A nice feature would be a button like the 'Enable-Disable Trend Screener' button but for the Success Rate Simulator, as well as an easier way to input a TP target for the Simulator's use...not sure if this is possible or not, but would be cool if so.

3) When using the Trend Screener and clicking the SYM, the window quickly changes to the currency. When using the 'Trend Line Map Pro' and clicking the SYM, the window changes to the currency but then reloads all the signals (which takes a while). Does it have to work that way? I would love it if I could choose to *not* reload on the currency pair switch (when using TLMP) ...

btw - the button text is 'Enable-Disale Trend Screener', but is missing the 'b', should be > 'Enable-Disable Trend Screener'

As well, typo here:

https://www.mql5.com/en/market/product/46154

Reads:

 Support Resistance screnner 

Should be

  Support Resistance Screener 

I've read through your blog, thank you for it. I noticed a typo:

https://www.mql5.com/en/blogs/post/733976

Example 2 - TP Simulator > says '10 pips' but should say '20 pips'

As well, there are three items I'm unsure about:

1) What is fuzzy logic?

2) Run ATR TP Calculator

3) Run SL Calculator

I didn't see those items mentioned in the blog post, have you described this parameters elsewhere? I would love to learn about their use/applicability...

Thank you again for what looks like a powerful tool, I've very excited to try it out next week!

Best,

Mark

Hi Mr. Mark.

Thank you for comments, let me go through it point by point please,

Point 1 : 

<< 

I just purchased your product and must say that I'm thus far I'm impressed with the level of detail and how well you have organized everything, looks very nice thus far, will post again when I've had some actual trading experience with it. 

>>

Thank you for your words and for choosing our indicator, sir. Hopefully that it would be a useful tool added to your trading arsenal.

Point 2 : 

<<

Sometimes it can run a bit slow (my MT4 is pretty slow in general as I have a number of processor-intensive indicators). Is there any way to pause the calculations it's doing temporarily? Or maybe there could be a parameter to define the frequency of updates?

>>

Yes. That's possible. We can create a parameter we define the frequency updating period.

Point 3 : 

<<

A nice feature would be a button like the 'Enable-Disable Trend Screener' button but for the Success Rate Simulator, as well as an easier way to input a TP target for the Simulator's use...not sure if this is possible or not, but would be cool if so.

>>

Ok. Understand. Thank you for your suggestion, Mr. Mark. I passed this suggestion to my technical team to plan for it in our next update.

Point 4 : 

<<

When using the Trend Screener and clicking the SYM, the window quickly changes to the currency. When using the 'Trend Line Map Pro' and clicking the SYM, the window changes to the currency but then reloads all the signals (which takes a while). Does it have to work that way? I would love it if I could choose to *not* reload on the currency pair switch (when using TLMP) ...

>>

It's working in this way. Trend Line Map indicator isn't a simple indicator. It's a signal calculator. In order that we keep it optimized and we ensure that it can work with all computer performance, we give it around 1 minute to calculate all signals, profit/loss/time..etc per time frame. This indicator is doing a lot of calculations,that's why it's working with this way, Mr. Mark.

Point 6 : << btw - the button text is 'Enable-Disale Trend Screener', but is missing the 'b', should be > 'Enable-Disable Trend Screener' >>

Thank you very much for your comment. We will correct this spelling mistake Mr. Mark. Really thank you. We have several users who are using it and our priority that we give the best indicators in the market.

Point 8  : 

<<

I've read through your blog, thank you for it. I noticed a typo:

https://www.mql5.com/en/blogs/post/733976

Example 2 - TP Simulator > says '10 pips' but should say '20 pips'

>>

Corrected. Sir. Thank you.

Point 9 : 

1) What is fuzzy logic?

Fuzzy logic only permits conclusions which are either true or false. However, there are also propositions with variable answers, such as one might find when asking a group of people to identify a color. In such instances, the truth appears as the result of reasoning from inexact or partial knowledge in which the sampled answers are mapped on a spectrum.

Both degrees of truth and probabilities range between ( 0 and 1) or ( 0 and - 1 ) and hence may seem similar at first, but fuzzy logic uses degrees of truth as a mathematical model of vagueness, while probability is a mathematical model of ignorance.

This is a nice article talking about Fuzzy logic and how it's applicated in trading sir : https://www.mql5.com/en/articles/3795

2) Run ATR TP Calculator

You can use this method to find the Takeprofit based on ATR and then using Ration to define TP.

Example ATR value in the signal bar: 0.0005 and you're using ratio 2, it means the take-profit will be 0.0010.

3) Run SL Calculator

To find the best Stoploss, you need RUN_SL_CALCULATORand the indicator will display in the chart the recommended Stoploss per signal. 

Yes. we have described those parameters in this article Mr. Mark.

Article Link : https://www.mql5.com/en/blogs/post/733900

Thank you for very much for all your suggestions. I sent this request to my technical to plan for it during the next update.

If you have any questions,please feel free to contact me.

Best regards.

Sayadi Ashref.

Hi Mr Ashref,

Thank you very much for your prompt reply. You answered all of my queries except for one which I probably failed to explain sufficiently - I will write a separate message to you about this later in the week...

The frequency of update parameter would definitely help, I look forward to seeing that in the next version.

Thank you for pointing out the documentation for the Calculaters, I'm sure that will be helpful.

All the best,

Mark

Hi cant see where to install indicator says product purchased then it takes me to metatrader and i dont know what to do then ?

Cheers Simon

adding to previous comment I have logged into metatrader and it is showing no purchased button in toolbox

Best Regards Simon

Hi sir.

Thank you for your comment. Can we have a small teamviewr session ? Where i will assist you how to get the product perfectly sir ? I will book only 5 minutes from your time and i will assist you how to get Trend Screener sir. 

Best regards.

SAYADI Ashref.

Really like your indicator I find it very useful for trading.

One feature I would like to see added would be the ability to sort the pairs by strongest to weakest trending pairs to make it easier to only focus on the pairs that are in strong trends that would be very helpful. 

Hello Sayadi,

I purchased this version, since my broker is not support MT5 yet. Before payment made, I tested the MT4 free version and MT5 both versions can be installed properly. After payment made, I try to install pro v, but with no luck, tried many times.

My operations include: Clicked 'Install on the terminal' on product page, and chrome pop up a link to open MT4, and key in my account email and password, then nothing happens. See attached screen shot.

Please let me know how to do and make the MT4 Pro Version work.

Look forward your quick reply.

Lei

P.S. I heard a very sharp bell sound, a few seconds after click 'OK' in MT4 account and password window. Don't knwo what it mean, or is it helpful.

Good Afternoon sir.

Thank you for your comments.

It depends on many factors:

1. linux or Mac (the Market will not work on those OS in some/most of the cases);
2. Internet Explorer 8 or higher (for Wondows OS) - it is obligatory;
3. it may be some other limitation for example ...

Recommendation : 

Step 1 : Delete your MT4.

Step 2 : Install MT4 again.

Step 3 : Connect to Community via MT4.

Step 4 : Install the product.

If you're still getting an issue, sir, can we plan for a small TeamViewer session where I will check these details with you, sir? I'm sending you all email sir.

Best regards.

SAYADI Ashref.

Hi Sayadi,

Thank you for your reply.

I have sorted the problem, by setting IE the default browser and reset mql5.com password. In the password confirmation email, there is a login ID which is not my email (that’s the key). Use the above login ID and new password. I can then login with MT4 market and get the product purchased and installed correctly.

I share the above information with you and just in case anyone else you could share with your customer.

Thanks again,

Lei

Hi sir.

Thank you for your review, sir.

Can you please switch this review, to the review section, sir? This section is for comments regarding updating and issues that our customers can face in system installing.

In order to post your review, please can go to this section sir : 

Thank you sir.

Best regards.

SAYADI Ashref.

Hi sir.

Thank you for your comments.

First of all, this a comment section about the Trend Screener indicator and not Trend Line Map indicator. The indicator that is then attached in the screen-shot is Trend Line Map indicator and it's not Trend Screener sir. IF you have questions or feedback regarding the Trend Line Map indicator, please can you posted in Trend Line Map indicator section.

Second, according to the attached screen-shot, you're using the free version of the Trend Line Map indicator. In the free version of the trend line Map indicator, you can see only H4 signals.  

Point 1 : << You see NOW " >>

You see now because you don't didn't change the Source of signals. Please change the source to TREND_SCREENER_PRO to see H4 signals that are available in the free version of Trend Line Map indicator.

Here a screen-shot, how you see change the source of the signal.

Point 2 : << mt4 very slow indicater >

The Trend Line Map indicator isn't a slow indicator sir and also isn't a traditional indicator. It's a tool to monitor all signals generated by Trend Line that is available in Trend Screener.

The indicator takes 1 minute to collect all signals that are available in M30 ( 30 minutes ) time frames.

The indicator takes 1 minute to collect all signals that are available in H1 ( 60 minutes ) time frames.

The indicator takes 1 minute to collect all signals that are available in H4 ( 240 minutes ) time frames.

Let me also invite to check this article about Trend Line Map indicator before that you buy the pro version of Trend Line Map indicator : 

Article Link : https://www.mql5.com/en/blogs/post/735112

You will see all the details and it already indicates that Trend Line Map indicator takes 1 minute to display the signal of time frames because it's a signals calculator sir.

Point 3 :  << no alert buy or sell not show tp and sl >>

We don't include any TakeProfit - Stoploss in our alert beause it's not a financial Advice sir. We are offering analytics tools. 

Note: We are offering several tools to calculate TakeProft sir and you select by youself what tools you want to use

Please check this article: https://www.mql5.com/en/blogs/post/733900

Please check this article: https://www.mql5.com/en/blogs/post/733976

The take-profit calculation are done by the Trend Screener indicator. ( You can build your custom take profit sir )

Important Note: 

1. Trend Screener and Trend Line Map indicator are too seperate indicator indicators and Trend Line Map indicator is working as a module for Trend Screener.

Trend Line Map pro : https://www.mql5.com/en/market/product/48086

Trend Lien Free     : https://www.mql5.com/en/market/product/48237

2. Please let me invite you to read all the articles that are available in the products pages to understand how the products are working sir.

Best regards.

SAYADI Ashref.