SMC Scanner Dashboard Order Blocks FVG

Stop flipping through 20 charts to find out where structure just broke. This indicator scans up to 30 symbols on 4 timeframes from a single chart and shows you, in one table, which markets just printed a BOS or CHoCH, which are sitting inside an active order block or fair value gap, and which just swept liquidity. When you find one worth a closer look, click it, mark the zone, and the trade plan tells you the lot size for your risk.

Every rule is the same fixed, published SMC logic, computed only from closed candles. What the dashboard shows on history is exactly what it would have shown live.

Scanner dashboard (up to 30 symbols x 4 timeframes)

  • Symbols: your own comma-separated list, or the first 30 symbols of Market Watch (default). Timeframes: up to 4, default M15, H1, H4, D1.
  • Each cell shows: structure direction, the latest BOS / CHoCH and how many closed candles ago, whether the last close is inside an active OB or FVG, and a recent liquidity sweep.
  • Cells with a structure break in the last 3 closed candles are highlighted.
  • One confluence score per symbol (0–100%, same six fixed weights as the chart panel). It is not a win rate and not a trade signal.
  • Sort by score, latest event or name; filter to "new events only" or "inside a zone only"; pages when the list is long.
  • Hover a cell for the details (level, candle time). Click a cell to switch this chart to that symbol and timeframe, or open a new chart (your choice).
  • Event log: the last 50 newly confirmed events across all symbols ("14:15 EURUSD H1 CHoCH up 1.0832"). Click a line to jump there. It survives chart switches and restarts.
  • Light on the terminal: work is spread over timer slices, each cell is updated only when its timeframe closes a new candle, and when the indicator runs on several charts only one of them does the scanning (another takes over if that chart is closed).
  • The dashboard can be dragged anywhere and collapsed to one line.

Cross-symbol alerts — no need to open a chart per symbol

  • Alerts for events found by the scanner: CHoCH and first entry into an OB / FVG by default; BOS and sweeps optional; filter by timeframe.
  • Pop-up, sound and MT5 push notifications, on candle close. No replay of old events after a reload; an event shown on several charts alerts once; push messages are rate-limited.
  • Off by default; one switch turns it on.

Trade plan with lot size from your risk (sends no orders)

  • Press "Plan", click any active order block or FVG on the chart (current or higher timeframe), and three lines appear: entry, stop and target.
  • Defaults: entry at the near edge of the zone (or middle / far edge), stop beyond the far edge by 0.1 x ATR, target at 2 x the stop distance. Drag any line and everything is recalculated.
  • Lot size from risk: % of balance (default 1%), % of equity or a fixed amount in account currency. Rounded down to the lot step, so you never risk more than planned.
  • The label shows lots, actual risk in account currency and %, reward-to-risk, and approximate margin. Warnings when the minimum lot already exceeds your risk, when margin is not enough, or when the spread is large compared with the stop.
  • Point value is calculated from the contract specification (and checked against the terminal), so gold, indices and cross pairs get the right size.
  • Plans are saved per symbol and restored after timeframe changes and restarts. If the zone is later invalidated, the plan turns grey and says so.
  • It is a calculator: place the order yourself with these numbers.

Everything on the chart, too

This indicator also includes every chart feature of our free SMC Structure Map indicator, with the same rules, so you do not need to load both:

  • Market structure: swing highs / lows (HH / HL / LH / LL, EQH / EQL), BOS and CHoCH, optional internal structure.
  • Order blocks and FVG with live states (tested / invalidated, touched / 50% / filled), liquidity sweeps of swing points and the previous day's high / low.
  • One higher timeframe drawn on the chart; multi-timeframe direction table; confluence score with every point listed; plain-language notes; premium / discount and OTE.
  • Chart alerts, presets and one-click toggles, English and Chinese, dark and light charts, high-DPI screens.
  • The same 14 calculation buffers for EA developers (iCustom + CopyBuffer; first input "Draw on the chart" = false gives a data-only copy).

Good to know

  • Confirmation has a delay by design: a swing point needs 5 candles on its right (default) and a break needs the candle to close. Nothing is shown earlier and nothing is redrawn.
  • This is an analysis and planning tool. It does not trade, and it does not tell you when to buy or sell. We tested order block retests and similar entry models on years of tick data and found no edge in them on their own — so there are no arrows and no win-rate panel here. What you get is time saved and a lot size you do not have to calculate by hand.
  • In the strategy tester (the free demo), the scanner shows the tested symbol on its 4 timeframes, because the tester's Market Watch holds only that symbol. On a live chart it scans up to 30 symbols.
  • The scanner needs history for every symbol and timeframe. The first time a symbol is used, the terminal may take a few minutes to download it; cells show "…" until ready.
  • A misspelled symbol name shows "×" in its row (hover: "symbol not found"); the other rows are not affected.
  • Works on forex, gold, indices, stocks and crypto CFDs, on any chart timeframe.

Main inputs

  • Everything from SMC Structure Map: structure, zones, higher timeframe, display, chart alerts.
  • Scanner: on / off, symbols (empty = Market Watch), max symbols (1–30), timeframes (max 4), bars per cell, "new event" candles, sweep look-back, click action, time budget per timer call.
  • Scanner alerts: master switch, BOS / CHoCH / zone entry / sweep, timeframes.
  • Trade plan: risk mode and value, entry line, stop buffer (x ATR), target (x stop distance), plans per symbol.

Questions or ideas? Leave a comment on this page — feedback is welcome.

Altri dall’autore
SMC Structure Map draws market structure, order blocks, fair value gaps and liquidity sweeps the same way every time: only from closed candles, with fixed rules you can read. What you see on history is exactly what you would have seen live — nothing is redrawn later. Application instructions   Trading these setups on a prop firm account? One bad day can still break the daily-loss rule. I also build MT5 risk tools for that: see all my products Market structure Confirmed swing highs and lows label
FREE
TradeAssist Risk Panel MT5 — a professional manual-trading panel for MetaTrader 5: risk-based lot sizing, draggable Entry/SL/TP chart lines, multi-level partial close, 6 trailing-stop variants, automatic break even and full on-chart order management. TradeAssist Risk Panel MT4 (click to download)           TradeAssist Risk Panel MT5 (click to download) Application instructions   -   Using this panel on a prop firm account? The panel helps you plan each trade; it cannot stop the one trade you
FREE
VolPulse shows where volume traded in every session and turns it into a clear plan on your chart. Trading volume levels on a prop firm account? A good level does not save you from one oversized loss. I also build MT5 risk tools for that: see all my products Full user guide (setup, settings, how the arrows work): https://www.mql5.com/en/blogs/post/777075 What you get • Session volume profiles (1–10 sessions) with POC, value area (VAH / VAL) and HVN / LVN rows • Session VWAP and developing POC / V
FREE
Your broker's chart runs on server time. Candle TimeZone Panel shows, for any candle under the mouse, when it really happened in your own time zone, plus how much it moved and its spread. No mental math, no wrong hour after a daylight-saving switch. What you see when you point at a candle Its open time in your main time zone, with the GMT offset (default: Beijing). Up to 2 extra time zones side by side, e.g. New York and London. Server time and this computer's time for reference (can be hidden).
FREE
Prop Firm Risk Guardian MT5 — pass the risk rules, not just the profit target. Prop Firm Risk Guardian MT5 (click to download) Application instructions   Most prop-firm challenges are failed not because you can't trade — but because one bad day or a single oversized position breaches the daily or overall drawdown limit. Prop Firm Risk Guardian is a lightweight monitoring utility that enforces those limits for you, automatically , 24/5. It is a pure protection tool . It never opens trades, send
TradeAssist Risk Panel MT4 — a professional manual-trading panel for MetaTrader 4: risk-based lot sizing, draggable Entry/SL/TP chart lines, multi-level partial close, 6 trailing-stop variants, automatic break even and full on-chart order management. TradeAssist Risk Panel MT4 (click to download)           TradeAssist Risk Panel MT5 (click to download) Application instructions   -   RISK MANAGEMENT - Automatic lot calculation from the risk amount and the SL distance - 8 risk modes: Fixed $, %
FREE
TradeAssist Lot Calculator — the free position size calculator that cannot touch your account. Drag the stop-loss line on your chart and instantly see the correct lot size for your risk budget. No spreadsheets, no web calculators, no mental math — and no trading permissions needed, because this tool contains zero trading code. It calculates. That is all it does. WHY THIS ONE • 9 risk modes — fixed $, % of Balance / Equity / Free Margin / Custom base, % of previous Day / Week / Month balance, and
FREE
` Account Limit Guard MT5 ` is a free account-level daily limit protection utility for MetaTrader 5. It is not a trading strategy, does not open trades, does not generate signals, and does not rely on any specific indicator. Its purpose is simple: monitor your account-level daily loss and automatically apply protection once your configured limit is reached. For prop / funded-challenge traders   Need more than a daily-loss cap?   Prop Firm Risk Guardian (MT5)   is the full prop-challenge p
FREE
VolPulse Telegram Bridge forwards the alerts of the free VolPulse Volume Profile indicator to Telegram: market-state changes, touches of key levels (POC, VAH, VAL, naked POC) and new entry signals with stop and target. It does not trade. It does not read your positions, balance or account number. Setup (about 2 minutes) Install the free indicator "VolPulse Volume Profile" and attach it to your charts: https://www.mql5.com/en/market/product/200141 Tools → Options → Expert Advisors → tick "Allow W
FREE
` Emergency Webhook Alert ` is an MT5 Expert Advisor for trade event notifications. It monitors position opening, closing, stop loss, take profit, partial close, and reversal events, then sends trade events through a notification relay server to WeChat and Telegram. The EA includes an on-chart panel, supports English and Chinese UI, and is designed for real-time status, pairing status, and pending event monitoring.   Want more than event alerts? Emergency Webhook Alert forwards your trade eve
FREE
Risk Guardian Pro MT5 is an account-level risk protection utility for MetaTrader 5.   It does not open trades, generate signals or replace your strategy. Instead, it acts as a safety layer above your account and helps   enforce risk discipline across manual trading and other Expert Advisors.   This tool is designed for traders who want clear account protection rules, visible risk status and automatic response when limits are   reached.   Main Features   - Daily loss limit   - Total drawdo
Your terminal is at home. You are not. TradeAssist Remote Monitor sends every fill, pending order, SL/TP change and risk event from your MT5 account straight to Telegram, with a chart screenshot marked with entry, stop loss and take profit. A remote MT5 account monitor for traders running on a VPS or away from the desk. Check account balance, equity, margin and open positions from Telegram at any time, get instant disconnect / offline alerts if your VPS or terminal drops, and receive drawdown an
Filtro:
Nessuna recensione
Rispondi alla recensione