Commenti | Trade Copier MT5 Copy Trade Orders | Acquista il Utilità di trading per MetaTrader 5

Relaxeds 2026.01.09 18:58 #1

“This software does not copy trades at all — absolutely nothing. Even when both copiers clearly detect each other and show a connection, no orders are copied. Zero.
The developer sent a video file as ‘support’, but it is obvious that he doesn’t even understand his own product. The video is confusing, poorly explained, and completely useless.
The PDF documentation is just as bad — vague, incomplete, and provides no clear or working instructions whatsoever.
As a result, this so-called Trade Copier is nothing more than a waste of money and time. The product is unreliable, poorly documented, and clearly unfinished. This is not a professional tool — it’s basically junk. Avoid it.”

Nurhidaya Tullah 2026.02.03 00:02 #2

Relaxeds #:
“This software does not copy trades at all — absolutely nothing. Even when both copiers clearly detect each other and show a connection, no orders are copied. Zero.
The developer sent a video file as ‘support’, but it is obvious that he doesn’t even understand his own product. The video is confusing, poorly explained, and completely useless.
The PDF documentation is just as bad — vague, incomplete, and provides no clear or working instructions whatsoever.
As a result, this so-called Trade Copier is nothing more than a waste of money and time. The product is unreliable, poorly documented, and clearly unfinished. This is not a professional tool — it’s basically junk. Avoid it.”

The issue is caused by different symbol suffixes between the two brokers and can be resolved via the expert’s Symbol Mapping section,

as clearly explained in the provided PDF and in the product description. Support was offered, but no further response was received.

Sukumaran Nair Sudhakumar 2026.02.05 20:51 #3

NOT TRADING SYMBOL XAUUSD to GOLD# please update

Nurhidaya Tullah 2026.02.05 21:02 #4

Sukumaran Nair Sudhakumar #:
NOT TRADING SYMBOL XAUUSD to GOLD# please update

Thank you for your comment.

This issue is related to Symbol Mapping.

Your Master account is using XAUUSD, while your Slave broker uses GOLD#.

Because the symbol names are different, the trade cannot be copied automatically.

Please open the **Symbol Mapping** section in the copier settings and add this mapping:

XAUUSD:GOLD#

If you are not sure about the exact symbol names, please take **screenshots from BOTH terminals**:

• Master MetaTrader → Market Watch (showing XAUUSD)

• Slave MetaTrader → Market Watch (showing GOLD#)

Make sure the trading symbol is clearly visible in both screenshots.

Send them to us, and we will create the correct mapping for you.

You can then simply paste it into the Symbol Mapping field on the Slave account.

Once Symbol Mapping is configured correctly, XAUUSD trades will copy without any issues.

Sukumaran Nair Sudhakumar 2026.02.05 21:20 #5

SYMBOL MAPING DONE

Sukumaran Nair Sudhakumar 2026.02.05 21:26 #6

master

Sukumaran Nair Sudhakumar 2026.02.05 21:28 #7

also slave always disconnecting after restart mt5 connecting

Nurhidaya Tullah 2026.02.05 21:42 #8

Sukumaran Nair Sudhakumar #:
also slave always disconnecting after restart mt5 connecting

Until both symbols are correctly defined in the Symbol Mapping section, a full connection cannot be established.

Therefore, please make sure to enter the following exact setting in the **Symbol Mapping** section on the Slave broker:

XAUUSD:GOLD#

Also, please ensure that the **Master ID** and **Slave Number** are entered correctly, exactly as explained in the product description.

If the issue is resolved, please let us know.

We are here to help you until everything works properly.

Sukumaran Nair Sudhakumar 2026.02.05 21:54 #9

its correct ? if i use two master signal to one slave how to set?

Nurhidaya Tullah 2026.02.05 22:16 #10

Sukumaran Nair Sudhakumar #:

its correct ? if i use two master signal to one slave how to set?

Image

File:

1000078512.jpg 64 kb

Nurhidaya Tullah 2026.02.05 22:24 #11

Nurhidaya Tullah #:
Image

Thank you for your question.

When using **2 Master accounts and 1 Slave account**, Symbol Mapping needs to be configured for each Master separately on the Slave.

For example:

- Master 1 trades XAUUSD → Slave broker uses GOLD#

- Master 2 trades EURUSD → Slave broker uses EURUSDm

In the **Symbol Mapping** section of the copier on the Slave, enter:

XAUUSD:GOLD#

EURUSD:EURUSDm

Each Master symbol must have its corresponding Slave symbol mapping.

This ensures trades from both Masters are copied correctly to the Slave account.

If you are not sure about the exact symbols, please take screenshots of the Market Watch from **both Master terminals and the Slave terminal** and send them to us.

We can create the correct mappings for you to paste directly into the Symbol Mapping field.

Once set correctly, the Slave will replicate trades from both Masters without any issues.

Nurhidaya Tullah 2026.02.05 22:36 #12

To receive trades from two Masters on a single Slave, you need to open **two separate charts** on the Slave.

Chart 1 → Master 1

Chart 2 → Master 2

Each chart must have its own Master ID and Symbol Mapping.

The Slave will not accept a duplicate Master on the same chart.

This setup allows both Masters to work independently and copy trades to the Slave without conflicts.

Ruben Selbig 2026.02.16 11:13 #13

I Can't get the Slave Account to Connect to the Master. Both are running, interface a little bit weird but functional, i even got VPS for both Accounts but the Slave Account still isn't shown in the Master Interface. Please tell me how to fix it

Nurhidaya Tullah 2026.02.16 23:23 #14

Ruben Selbig #:

I Can't get the Slave Account to Connect to the Master. Both are running, interface a little bit weird but functional, i even got VPS for both Accounts but the Slave Account still isn't shown in the Master Interface. Please tell me how to fix it

Thank you for the details. The issue is that this copier is a Local Copier, which means it only works when both the Master and Slave accounts are running on the same VPS or computer. If you run the Master on one VPS and the Slave on another, the copier cannot transfer the positions between them. To fix this, please make sure both the Master and Slave accounts are running on the same VPS or local machine.

Ruben Selbig 2026.02.20 12:07 #15

Nurhidaya Tullah #:

Thank you for the details. The issue is that this copier is a Local Copier, which means it only works when both the Master and Slave accounts are running on the same VPS or computer. If you run the Master on one VPS and the Slave on another, the copier cannot transfer the positions between them. To fix this, please make sure both the Master and Slave accounts are running on the same VPS or local machine.

I got a Windows VPS on which I can now run multiple MT5 setups at once and now it Works great. Thanks for the help!

hendrapaul 2026.02.25 12:03 #16

I just paid for your MT5 Trade Copier. Can you please check for payment from David Hendrawan / Indonesia using OVO equal to $30.

Thanks +62 877 2891 7092

Nurhidaya Tullah 2026.02.25 12:58 #17

hendrapaul #:

I just paid for your MT5 Trade Copier. Can you please check for payment from David Hendrawan / Indonesia using OVO equal to $30.

Thanks +62 877 2891 7092

Hello,

Thank you for your message.

Please note that sellers do not have access to payment information or transaction details. All payments are processed directly by MQL5, and we cannot verify individual payments from our side.

If your payment has been successfully completed, the product will be activated automatically in your MQL5 account.

If you experience any issue with activation or payment confirmation, please contact MQL5 Service Desk directly through your profile for assistance.

Also, for your security and privacy, we recommend removing your phone number from this public comment section.

Thank you for your understanding.