MACD Signal Trend Cross Scanner All Pair Dashboard
- Indicateurs
- Version: 1.0
- Activations: 5
MACD Signal Trend Cross Scanner All Pair Dashboard
Overview
MACD Scanner Dashboard is a technical analysis utility and multi-symbol, multi-timeframe dashboard indicator designed for MetaTrader 4[cite: 1]. Its primary objective is to monitor MACD crossover events across multiple currency pairs and chart timeframes simultaneously from a single active chart window[cite: 1]. Instead of manually switching between dozens of charts, traders can observe real-time market momentum, directional bias, calculated Entry levels, ATR-based Stop Loss (SL), dual Take Profit (TP) targets, and signal age inside a compact, interactive on-chart table[cite: 1]. The tool integrates a modular multi-indicator filtering suite alongside customizable visual markers and multi-channel alert notifications[cite: 1, 3].
Operating Principle and Signal Characteristics
- Core Engine: The scanner evaluates standard Moving Average Convergence Divergence (MACD) values using configurable Fast EMA, Slow EMA, Signal SMA, and Applied Price parameters across all selected pairs and timeframes[cite: 1].
- Dual Entry Logic Modes: Traders can select between two distinct crossover detection modes[cite: 1]:
1. Signal Line Crossover Mode: Monitors intersections between the MACD Main line and the Signal line[cite: 1]. An optional Zero-Line filter restricts bullish signals to occur above the zero level and bearish signals below the zero level[cite: 1].
2. Level 0 Crossover Mode: Monitors direct intersections of the MACD Main line crossing above or below the 0.0 equilibrium level[cite: 1].
- Signal Validity and Non-Repainting Behavior: All crossover calculations and filter validations are strictly evaluated on closed candlesticks (starting from Bar 1 backwards within the defined lookback window), never on the unclosed forming bar (Bar 0)[cite: 1]. Once a valid signal is confirmed at candle close, the signal direction, timestamp, entry price, and ATR-based levels remain fixed and do not repaint[cite: 1, 2].
- General Buy Signal Condition: Triggered when the selected MACD crossover mode registers an upward cross on a closed bar, aligns with the allowed trade direction setting, and satisfies all enabled confirmation filters[cite: 1, 2].
- General Sell Signal Condition: Triggered when the selected MACD crossover mode registers a downward cross on a closed bar, aligns with the allowed trade direction setting, and satisfies all enabled confirmation filters[cite: 1, 2].
- Multi-Indicator Confirmation Suite: Includes 15 optional technical confirmation modules (RSI, ADX, Single MA, Ichimoku, Double MA, Awesome Oscillator, Parabolic SAR, Heiken Ashi, CCI, RVI, Secondary MACD, Support/Resistance, Fibonacci Retracement, and Supertrend)[cite: 3]. When activated, a MACD signal is displayed only if it aligns with the directional criteria of the selected filters[cite: 1, 3].
- Dynamic Risk-Reward Projection: At the exact signal candle, the indicator reads the Average True Range (ATR) to compute a volatility-adjusted Stop Loss distance and projects two proportional Take Profit targets based on user-defined Risk-to-Reward multipliers[cite: 1].
Key Features
- Multi-Pair and Multi-Timeframe Matrix: Scans custom symbol lists or active Market Watch symbols across multiple timeframes (M1 to MN1) in automated timer-driven intervals[cite: 1].
- Interactive On-Chart Dashboard: Features a draggable panel with persistent screen coordinates, one-click column sorting by Pair, Timeframe, Direction, or Signal Time, plus a Minimize/Maximize toggle, Refresh button, and Clear button[cite: 1].
- One-Click Chart Switching and Auto-Drawing: Clicking the OPEN button on any signal row automatically switches the active chart to the corresponding symbol and timeframe and draws the entry arrow alongside Entry, SL, TP1, and TP2 horizontal reference lines[cite: 1].
- Dynamic Volatility Risk Levels: Automatically calculates suggested Stop Loss and two Risk-Reward Take Profit levels based on the Average True Range (ATR) at the signal bar[cite: 1].
- Multi-Channel Alert System: Supports MetaTrader pop-up alerts, custom WAV sound alerts, mobile push notifications, and email alerts with a duplicate-prevention option for new signals only[cite: 1].
- Resource and CPU Optimization: Uses timer-based scanning intervals, configurable bar history limits, and symbol caps to maintain smooth terminal performance[cite: 1].
- Adaptive High-DPI Scaling: Includes a global percentage scaling parameter (70% to 180%) and individual column width controls to fit standard laptops as well as 4K monitors[cite: 1].
Modular Confirmation Filter Categories
To adapt the scanner to different market regimes (trending, ranging, or pullback phases) without altering the core MACD engine, traders can selectively enable any combination of the following filter groups[cite: 1, 3]:
- Trend Direction Filters: Single Moving Average, Double Moving Average crossover alignment, Ichimoku Senkou Span B cloud position, Parabolic SAR dot polarity, Heiken Ashi candle polarity, and ATR-based Supertrend state[cite: 3].
- Trend Strength and Momentum Filters: ADX minimum threshold level, long-period RSI (75) midpoint bias, Awesome Oscillator (histogram magnitude, slope color, and zero-line bias), CCI zero-line trend, RVI trend/signal alignment, and secondary MACD confirmation[cite: 3].
- Reversal and Exhaustion Filters: Standard RSI oversold/overbought threshold crossover and CCI overbought/oversold zone validation[cite: 3].
- Market Structure Filters: Dynamic Support/Resistance swing proximity zones and automated ZigZag-based Fibonacci retracement zones[cite: 3].
Operation and Setup Recommendations
- Supported Instruments: Compatible with all Forex major and minor pairs, metals (such as XAUUSD), indices, and crypto symbols available in your broker Market Watch[cite: 1, 2].
- Recommended Timeframes: Suitable for intraday trading (M5, M15, M30, H1) and swing trading (H4, D1)[cite: 1, 2]. Using M1 across a large number of symbols simultaneously is not recommended due to increased tick noise and CPU load[cite: 1, 2].
- Broker and Account Environment: Works on both Hedging and Netting MT4 accounts regardless of broker symbol prefixes or suffixes (such as EURUSD.m or EURUSDpro) when using Market Watch auto-detection or matching symbol names in InpSymbols[cite: 1, 2].
- Historical Data Synchronization: Before activating multi-pair scanning, ensure that historical candlestick data is loaded in MT4 for all target symbols and timeframes (at least 120 bars per timeframe) so indicator buffers calculate accurately on the first scan cycle[cite: 1].
- CPU and Memory Management: Scanning 15 symbols across 5 timeframes equals 75 simultaneous chart calculations[cite: 1, 2]. Keep InpMaxSymbols within reasonable limits (10 to 20 pairs), set InpScanSec to 5 seconds or higher, and avoid running multiple heavy dashboard instances on the same terminal[cite: 1, 2].
Dashboard Interface and Troubleshooting Guide
- Green Text / Cyan-Green Arrows: Indicate a confirmed Bullish (BUY) crossover signal and upward momentum bias[cite: 1, 2].
- Red Text / Red Arrows: Indicate a confirmed Bearish (SELL) crossover signal and downward momentum bias[cite: 1, 2].
- Muted Grey Text: Indicates neutral headers, inactive rows (when InpShowEmpty is enabled), or elapsed signal age[cite: 1, 2].
- Status Bar: Displays the active MACD entry mode, total pairs and timeframes scanned, number of active valid signals, active filter tags, and the timestamp of the last scan cycle[cite: 1].
- Empty Table Troubleshooting: If no rows appear after attaching the indicator, verify that sufficient historical bars exist for the selected pairs, increase InpLookback, or temporarily disable strict filter combinations to confirm baseline MACD crossovers are present[cite: 1].
- Panel Reset: If the dashboard panel is dragged off-screen after changing monitor resolution, click the REFRESH button or remove the indicator and re-attach it after clearing MT4 Global Variables (F3)[cite: 1].
Input Parameters Documentation
1. Core Entry Logic (MACD Engine)[cite: 1]
- InpSec1 (Default: "=== [1] CORE ENTRY LOGIC (MACD ENGINE) ==="): Section header separator in the Inputs tab[cite: 1].
- InpEntryMode (Default: MODE_MACD_SIGNAL_CROSS): Selects the MACD crossover detection method (Signal Line Crossover or Level 0 Crossover)[cite: 1].
- FastEMA (Default: 12): Fast Exponential Moving Average period in bars for MACD calculation[cite: 1].
- SlowEMA (Default: 26): Slow Exponential Moving Average period in bars for MACD calculation[cite: 1].
- SignalSMA (Default: 9): Signal Simple Moving Average period in bars for MACD calculation[cite: 1].
- AppliedPrice (Default: PRICE_CLOSE): Candlestick price series used for MACD computation[cite: 1].
- UseZeroFilter (Default: true): Enables zero-line bias filtering in Signal Cross mode (Buy signals require MACD above 0, Sell signals require MACD below 0)[cite: 1].
- InpDirection (Default: 0): Filters allowed signal directions (0 = Both Buy and Sell, 1 = Buy signals only, 2 = Sell signals only)[cite: 1].
- InpLookback (Default: 50): Maximum number of closed bars backward to search for the most recent valid crossover[cite: 1].
2. Multi-Filter Suite Framework[cite: 1, 3]
- InpFilter1 (Default: "=== 1. RSI CROSS FILTER ==="): Section header for RSI crossover filter[cite: 3].
- Use_RSI_Cross_Filter (Default: false): Enables or disables Relative Strength Index threshold crossover confirmation[cite: 3].
- RSI_Length (Default: 14): Calculation period in bars for the RSI crossover filter[cite: 3].
- RSI_Price_Source (Default: PRICE_CLOSE): Applied price source for RSI calculation[cite: 3].
- RSI_Oversold (Default: 30.0): Lower oversold threshold level for bullish RSI cross validation[cite: 3].
- RSI_Overbought (Default: 70.0): Upper overbought threshold level for bearish RSI cross validation[cite: 3].
- InpFilter2 (Default: "=== 2. ADX FILTER ==="): Section header for ADX trend strength filter[cite: 3].
- Use_ADX_Filter (Default: false): Enables or disables Average Directional Index minimum trend strength filtering[cite: 3].
- ADX_Period (Default: 10): Calculation period in bars for the ADX indicator[cite: 3].
- ADX_Min_Level (Default: 20.0): Minimum ADX main line value required to validate a signal[cite: 3].
- InpFilter3 (Default: "=== 3. SINGLE MA FILTER ==="): Section header for single Moving Average trend filter[cite: 3].
- Use_MA_Filter (Default: false): Enables or disables price position filtering relative to a single Moving Average[cite: 3].
- MA_Period (Default: 50): Averaging period in bars for the single Moving Average[cite: 3].
- MA_Method (Default: MODE_SMA): Smoothing method (SMA, EMA, SMMA, LWMA) for the single Moving Average[cite: 3].
- MA_Shift (Default: 0): Horizontal shift in bars for the single Moving Average[cite: 3].
- InpFilter4 (Default: "=== 4. ICHIMOKU SENKOU SPAN B FILTER ==="): Section header for Ichimoku cloud baseline filter[cite: 3].
- Use_Ichimoku_Filter (Default: false): Enables or disables price filtering against the Ichimoku Senkou Span B line[cite: 3].
- Ichimoku_Tenkan (Default: 9): Tenkan-sen (Conversion Line) period in bars[cite: 3].
- Ichimoku_Kijun (Default: 26): Kijun-sen (Base Line) period in bars[cite: 3].
- Ichimoku_SenkouB (Default: 52): Senkou Span B (Leading Span B) period in bars[cite: 3].
- InpFilter5 (Default: "=== 5. RSI 75 FILTER ==="): Section header for long-period RSI midpoint filter[cite: 3].
- Use_RSI75_Filter (Default: false): Enables or disables long-period RSI 50-level trend bias filtering[cite: 3].
- RSI_Filter_Period (Default: 75): Calculation period in bars for the trend RSI filter[cite: 3].
- InpFilter6 (Default: "=== 6. DOUBLE MA FILTER ==="): Section header for dual Moving Average alignment filter[cite: 3].
- Use_DoubleMA_Filter (Default: false): Enables or disables fast vs. slow Moving Average trend alignment[cite: 3].
- MA_A_Period (Default: 30): Period in bars for the faster Moving Average (MA A)[cite: 3].
- MA_A_Method (Default: MODE_EMA): Smoothing method for MA A[cite: 3].
- MA_A_Applied (Default: PRICE_CLOSE): Applied price for MA A[cite: 3].
- MA_A_Shift (Default: 0): Horizontal shift in bars for MA A[cite: 3].
- MA_B_Period (Default: 140): Period in bars for the slower Moving Average (MA B)[cite: 3].
- MA_B_Method (Default: MODE_EMA): Smoothing method for MA B[cite: 3].
- MA_B_Applied (Default: PRICE_CLOSE): Applied price for MA B[cite: 3].
- MA_B_Shift (Default: 0): Horizontal shift in bars for MA B[cite: 3].
- InpFilter7 (Default: "=== 7. AWESOME OSCILLATOR FILTER ==="): Section header for Bill Williams Awesome Oscillator filter[cite: 3].
- Use_AO_Filter (Default: false): Enables or disables Awesome Oscillator momentum filtering[cite: 3].
- Use_AO_Volume_Filter (Default: false): Enables minimum histogram magnitude thresholds for AO[cite: 3].
- AO_Buy_Min (Default: 4.0): Minimum AO value required for bullish confirmation when volume filter is active[cite: 3].
- AO_Sell_Max (Default: -4.0): Maximum AO value required for bearish confirmation when volume filter is active[cite: 3].
- Use_AO_Color_Filter (Default: false): Requires AO histogram slope/color to align with signal direction[cite: 3].
- Use_AO_Zero_Filter (Default: false): Requires AO value to be above zero for Buy and below zero for Sell[cite: 3].
- InpFilter8 (Default: "=== 8. PARABOLIC SAR FILTER ==="): Section header for Parabolic Stop and Reverse filter[cite: 3].
- Use_SAR_Filter (Default: false): Enables or disables Parabolic SAR dot position trend confirmation[cite: 3].
- SAR_Step (Default: 0.02): Acceleration step increment for Parabolic SAR[cite: 3].
- SAR_Maximum (Default: 0.2): Maximum acceleration factor for Parabolic SAR[cite: 3].
- InpFilter9 (Default: "=== 9. HEIKEN ASHI FILTER ==="): Section header for smoothed candlestick trend filter[cite: 3].
- Use_HeikenAshi_Filter (Default: false): Enables or disables Heiken Ashi candle body polarity confirmation[cite: 3].
- InpFilter10 (Default: "=== 10. CCI TREND FILTER ==="): Section header for Commodity Channel Index zero-line filter[cite: 3].
- Use_CCI_Filter (Default: false): Enables or disables CCI zero-level directional confirmation[cite: 3].
- CCI_Period (Default: 50): Calculation period in bars for the trend CCI filter[cite: 3].
- CCI_Applied (Default: PRICE_CLOSE): Applied price source for the trend CCI filter[cite: 3].
- InpFilter11 (Default: "=== 11. CCI OB & OS FILTER ==="): Section header for CCI momentum breakout filter[cite: 3].
- Use_CCI_OBOS_Filter (Default: false): Enables or disables CCI overbought/oversold momentum zone filtering[cite: 3].
- CCI_OBOS_Period (Default: 14): Calculation period in bars for the CCI OB/OS filter[cite: 3].
- CCI_OBOS_Applied (Default: PRICE_CLOSE): Applied price source for the CCI OB/OS filter[cite: 3].
- CCI_Overbought (Default: 100.0): Upper threshold level for bullish momentum confirmation[cite: 3].
- CCI_Oversold (Default: -100.0): Lower threshold level for bearish momentum confirmation[cite: 3].
- InpFilter12 (Default: "=== 12. RVI FILTERS ==="): Section header for Relative Vigor Index filters[cite: 3].
- Use_RVI_Filter (Default: false): Enables or disables RVI main line zero-level trend confirmation[cite: 3].
- RVI_Period (Default: 75): Calculation period in bars for the RVI trend filter[cite: 3].
- Use_RVI_Signal_Filter (Default: false): Enables or disables RVI main line vs. signal line alignment[cite: 3].
- RVI_Signal_Period (Default: 20): Calculation period in bars for the RVI signal crossover filter[cite: 3].
- InpFilter13 (Default: "=== 13. MACD FILTERS ==="): Section header for secondary MACD confirmation filters[cite: 3].
- Use_MACD_Filter (Default: false): Enables or disables secondary MACD histogram polarity filtering[cite: 3].
- MACD_FastEMA (Default: 12): Fast EMA period in bars for the secondary MACD filter[cite: 3].
- MACD_SlowEMA (Default: 26): Slow EMA period in bars for the secondary MACD filter[cite: 3].
- MACD_SignalSMA (Default: 9): Signal SMA period in bars for the secondary MACD filter[cite: 3].
- MACD_Applied (Default: PRICE_CLOSE): Applied price source for the secondary MACD filter[cite: 3].
- Use_MACD_Zero_Filter (Default: false): Enables or disables secondary MACD main line zero-level confirmation[cite: 3].
- InpFilter14 (Default: "=== 14. SR & FIBONACCI FILTERS ==="): Section header for price structure filters[cite: 3].
- Use_SR_Filter (Default: false): Enables or disables Support and Resistance proximity zone validation[cite: 3].
- SR_Period (Default: 50): Lookback window in bars to identify recent swing high and low levels[cite: 3].
- SR_Zone_Points (Default: 80): Tolerance buffer zone in broker points around Support/Resistance levels[cite: 3].
- Use_Fib_Filter (Default: false): Enables or disables Fibonacci retracement zone validation[cite: 3].
- Fib_Level_1 (Default: 0.382): First Fibonacci retracement ratio boundary[cite: 3].
- Fib_Level_2 (Default: 0.618): Second Fibonacci retracement ratio boundary[cite: 3].
- ZigZag_Depth (Default: 12): Minimum bar depth for swing detection in Fibonacci calculation[cite: 3].
- ZigZag_Deviation (Default: 5): Minimum price deviation in points for swing detection[cite: 3].
- ZigZag_Backstep (Default: 3): Minimum bar distance between consecutive swing points[cite: 3].
- InpFilter15 (Default: "=== 15. SUPERTREND FILTER ==="): Section header for ATR-based Supertrend filter[cite: 3].
- Use_Supertrend_Filter (Default: false): Enables or disables Supertrend directional state validation[cite: 3].
- ST_AtrPeriod (Default: 10): ATR lookback period in bars for Supertrend calculation[cite: 3].
- ST_Factor (Default: 3.0): Volatility multiplier factor for Supertrend band distance[cite: 3].
3. Scanner Settings[cite: 1]
- InpSec2 (Default: "=== [2] SCANNER SETTINGS ==="): Section header separator for scanner scope[cite: 1].
- InpSymbols (Default: "EURUSD,GBPUSD,USDJPY,AUDUSD,USDCAD,USDCHF,NZDUSD,EURJPY,GBPJPY,XAUUSD"): Comma-separated list of symbols to scan when Market Watch mode is disabled[cite: 1].
- InpTimeframes (Default: "M5,M15,M30,H1,H4"): Comma-separated list of timeframes to scan[cite: 1].
- InpUseWatch (Default: true): When true, automatically scans all visible symbols in the MT4 Market Watch window up to InpMaxSymbols[cite: 1].
- InpMaxSymbols (Default: 15): Maximum number of currency pairs/instruments scanned per cycle[cite: 1].
- InpScanSec (Default: 7): Timer interval in seconds between full multi-pair scan cycles[cite: 1].
- InpBarsCopy (Default: 120): Number of historical bars analyzed per symbol and timeframe (minimum 100 recommended for filter stability)[cite: 1].
4. Risk Management and ATR SL/TP[cite: 1]
- InpSec3 (Default: "=== [3] SL & TP (ATR BASED) ==="): Section header separator for volatility levels[cite: 1].
- InpShowSLTP (Default: true): Enables or disables calculation and chart drawing of Stop Loss and Take Profit lines[cite: 1].
- InpATRPeriod (Default: 14): Average True Range period in bars used to measure market volatility[cite: 1].
- InpATRMulSL (Default: 1.5): Multiplier applied to the ATR value to determine Stop Loss distance[cite: 1].
- InpTP1_RR (Default: 1.0): Risk-to-Reward ratio multiplier for Take Profit 1 relative to Stop Loss distance[cite: 1].
- InpTP2_RR (Default: 2.0): Risk-to-Reward ratio multiplier for Take Profit 2 relative to Stop Loss distance[cite: 1].
5. Alerts Configuration[cite: 1]
- InpSec4 (Default: "=== [4] ALERTS CONFIGURATION ==="): Section header separator for notifications[cite: 1].
- InpAlertPopup (Default: false): Enables MetaTrader desktop pop-up alert windows when a signal is detected[cite: 1].
- InpAlertSound (Default: false): Enables audio alert playback upon signal detection[cite: 1].
- InpSoundFile (Default: "alert.wav"): Name of the WAV audio file located in the MetaTrader Sounds directory[cite: 1].
- InpAlertPush (Default: false): Enables push notifications to the MetaTrader mobile app via MetaQuotes ID[cite: 1].
- InpAlertEmail (Default: false): Enables email notifications via configured terminal SMTP settings[cite: 1].
- InpEmailSubject (Default: "MACD Scanner Signal"): Subject line prefix used for outgoing alert emails[cite: 1].
- InpAlertOnlyNew (Default: false): When true, triggers alerts strictly for newly formed signals with newer timestamps than previous alerts[cite: 1].
6. Display and Geometry[cite: 1]
- InpSec5 (Default: "=== [5] DISPLAY & GEOMETRY ==="): Section header separator for panel layout[cite: 1].
- InpX (Default: 12): Initial horizontal distance in pixels from the upper-left corner of the chart[cite: 1].
- InpY (Default: 28): Initial vertical distance in pixels from the upper-left corner of the chart[cite: 1].
- InpScale (Default: 110): Global UI scaling percentage (clamped between 70 and 180) for high-DPI monitors[cite: 1].
- InpRowH (Default: 18): Height in pixels of each signal row in the dashboard table[cite: 1].
- InpFont (Default: 7): Base font size for dashboard text elements[cite: 1].
- InpPadX (Default: 7): Inner left and right padding in pixels inside the dashboard panel[cite: 1].
- InpWPair (Default: 68): Column width in pixels for the PAIR column[cite: 1].
- InpWTF (Default: 34): Column width in pixels for the TF (Timeframe) column[cite: 1].
- InpWArah (Default: 44): Column width in pixels for the DIR (Direction) column[cite: 1].
- InpWTime (Default: 100): Column width in pixels for the TIME column[cite: 1].
- InpWEntry (Default: 64): Column width in pixels for the ENTRY price column[cite: 1].
- InpWSL (Default: 64): Column width in pixels for the SL price column[cite: 1].
- InpWTP1 (Default: 64): Column width in pixels for the TP1 price column[cite: 1].
- InpWTP2 (Default: 64): Column width in pixels for the TP2 price column[cite: 1].
- InpWMACD (Default: 56): Column width in pixels for the MACD value column[cite: 1].
- InpWUmur (Default: 46): Column width in pixels for the AGE (elapsed time) column[cite: 1].
- InpWOpen (Default: 44): Column width in pixels for the OPEN action button column[cite: 1].
- InpShowEmpty (Default: false): Displays symbol/timeframe rows that currently have no active signal[cite: 1].
- InpMaxRows (Default: 18): Maximum number of rows displayed simultaneously on the dashboard table[cite: 1].
7. Sorting[cite: 1]
- InpSec6 (Default: "=== [6] SORTING ==="): Section header separator for table ordering[cite: 1].
- InpSortBy (Default: SORT_TIME): Default column used to sort dashboard rows (Time, Pair, Timeframe, or Direction)[cite: 1].
- InpSortNewest (Default: true): When true, sorts descending so the newest signals appear at the top[cite: 1].
8. Chart Visuals and Markers[cite: 1]
- InpSec7 (Default: "=== [7] CHART VISUALS & MARKERS ==="): Section header separator for on-chart objects[cite: 1].
- InpDrawOnChart (Default: true): Automatically draws the latest valid signal arrow and price levels on the active chart[cite: 1].
- InpShowArrow (Default: true): Enables or disables directional entry arrows at the signal candlestick[cite: 1].
- InpShowLevels (Default: true): Enables or disables horizontal Entry, SL, TP1, and TP2 trendlines and text labels[cite: 1].
- InpExtendBars (Default: 25): Number of bars to the right that signal level lines extend[cite: 1].
- InpArrowCodeBuy (Default: 233): Wingdings character code used for Buy signal arrows[cite: 1].
- InpArrowCodeSell (Default: 234): Wingdings character code used for Sell signal arrows[cite: 1].
- InpArrowSize (Default: 2): Visual thickness/size of signal arrows on the chart[cite: 1].
- InpArrowDistance (Default: 15): Vertical offset distance in broker points between the candle price and signal arrow[cite: 1].
9. Color Palette[cite: 1]
- InpSec8 (Default: "=== [8] COLOR PALETTE ==="): Section header separator for UI colors[cite: 1].
- InpColBg (Default: C'18,22,28'): Main background color of the dashboard container[cite: 1].
- InpColHead (Default: C'32,38,48'): Background color of the dashboard header bar and column buttons[cite: 1].
- InpColRow (Default: C'24,28,36'): Background color for even-numbered signal rows[cite: 1].
- InpColRow2 (Default: C'28,33,42'): Background color for alternating odd-numbered signal rows[cite: 1].
- InpColText (Default: C'220,225,230'): Primary text color for symbols, timeframes, timestamps, and entry prices[cite: 1].
- InpColBull (Default: C'0,200,83'): Text color used to highlight bullish BUY signals[cite: 1].
- InpColBear (Default: C'255,82,82'): Text color used to highlight bearish SELL signals[cite: 1].
- InpColMute (Default: C'120,128,140'): Secondary text color for status hints and neutral labels[cite: 1].
- InpColAccent (Default: C'0,188,212'): Accent color for the dashboard title, active sort headers, and OPEN buttons[cite: 1].
- InpColArrowBuy (Default: C'0,230,255'): Color of bullish BUY arrows drawn on the price chart[cite: 1].
- InpColArrowSell (Default: C'255,82,82'): Color of bearish SELL arrows drawn on the price chart[cite: 1].
- InpColEntry (Default: C'0,188,212'): Line color for the Entry reference level drawn on the chart[cite: 1].
- InpColSL (Default: C'255,82,82'): Text and line color for the Stop Loss level[cite: 1].
- InpColTP1 (Default: C'0,230,118'): Text and line color for the Take Profit 1 level[cite: 1].
- InpColTP2 (Default: C'0,200,83'): Text and line color for the Take Profit 2 level[cite: 1].
Risk Disclaimer[cite: 2]
Trading foreign exchange, commodities, indices, and other financial instruments on margin carries a high level of risk and may not be suitable for all investors[cite: 2]. Past performance or historical signal behavior does not guarantee future results[cite: 2]. This indicator is an analytical software utility designed to assist traders in technical market monitoring and does not constitute financial advice or a guarantee of profit[cite: 2]. Always test the product thoroughly on a demo account to understand its operational behavior and resource usage before applying it to live market analysis[cite: 2].
