Todos los encargos
Reglas
Mira cómo encargar de forma rápida un robot comercial
Lea las reglas antes de empezar el trabajo
Cómo encargar un robot comercial en MQL5 y MQL4
Mire el ejemplo de Tarea Técnica para encargar un robot
Nuevas solicitudes en la categoría:
30 - 100 USD
300 - 500 USD
30+ USD
Trabajo finalizado
Plazo de ejecución 3 minutos
Comentario del Ejecutor
Thanks you bro, Gives the job very clearly. easy to work with. I hope to work with you more
Comentario del Cliente
Fast! Accurate and fair. I will do business with again soon! A+ Happy Customer.-
Tarea técnica
I need a simple EA which waits for me to place a trade and then takes over from there.
All the EA will do is open a pending orders in the same direction as the trade I opened but a little bit ahead. if my trade hits the StopLoss, then the EA will cancel the pending order and sleep. If the pending order is filled, the EA opens another pending order, and another if that one is filled, etc.
Here is a more logical explanation:
The EA does nothing while there are no trades on the chart.
The trader will manually open a trade in order for the ea to activate.
(Here is a BUY example):
The EA would activate once it sees that there is a trade on the chart.
The EA will figure out if the trade was a buy or a sell. Say it is a BUY for this example. The EA will open one pending BUY $VAR1# pips ABOVE the current open trade for $VAR2# of lots. From here one of two things can happen:
Option One: The price moves against the open trade. The open trade gets stopped out. => In that case, the EA will cancel the pending order and go back to sleep.
Option Two: The price moves in favor and the pending order is triggered. => In that case: The EA will open a new pending BUY order with the same parameters as before (the EA will open a pending buy $VAR1# pips ABOVE the current open trade for $VAR2# of lots.)
This continues endlessly. (I have separate code to close trades)
It does the same thing but opposite for buy vs sell.
(Here is a SELL example):
The EA would come alive once it sees that there is a trade on the chart.
It will figure out if the trade was a buy or a sell. Say it is a SELL for this example. The EA will open one pending SELL $VAR1# pips BELOW the current open trade for $VAR2# of lots. From here one of two things can happen:
Option One: The price moves against the open trade. The open trade gets stopped out. => In that case, the EA will cancel the pending order and go back to sleep.
Option Two: The price moves in favor and the pending order is triggered. => In that case: The EA will open a new pending SELL order with the same parameters as before (the EA will open a pending sell $VAR1# pips BELOW the current open trade for $VAR2# of lots.)
This continues endlessly. (I have separate code to close trades.)
All the EA will do is open a pending orders in the same direction as the trade I opened but a little bit ahead. if my trade hits the StopLoss, then the EA will cancel the pending order and sleep. If the pending order is filled, the EA opens another pending order, and another if that one is filled, etc.
Here is a more logical explanation:
The EA does nothing while there are no trades on the chart.
The trader will manually open a trade in order for the ea to activate.
(Here is a BUY example):
The EA would activate once it sees that there is a trade on the chart.
The EA will figure out if the trade was a buy or a sell. Say it is a BUY for this example. The EA will open one pending BUY $VAR1# pips ABOVE the current open trade for $VAR2# of lots. From here one of two things can happen:
Option One: The price moves against the open trade. The open trade gets stopped out. => In that case, the EA will cancel the pending order and go back to sleep.
Option Two: The price moves in favor and the pending order is triggered. => In that case: The EA will open a new pending BUY order with the same parameters as before (the EA will open a pending buy $VAR1# pips ABOVE the current open trade for $VAR2# of lots.)
This continues endlessly. (I have separate code to close trades)
It does the same thing but opposite for buy vs sell.
(Here is a SELL example):
The EA would come alive once it sees that there is a trade on the chart.
It will figure out if the trade was a buy or a sell. Say it is a SELL for this example. The EA will open one pending SELL $VAR1# pips BELOW the current open trade for $VAR2# of lots. From here one of two things can happen:
Option One: The price moves against the open trade. The open trade gets stopped out. => In that case, the EA will cancel the pending order and go back to sleep.
Option Two: The price moves in favor and the pending order is triggered. => In that case: The EA will open a new pending SELL order with the same parameters as before (the EA will open a pending sell $VAR1# pips BELOW the current open trade for $VAR2# of lots.)
This continues endlessly. (I have separate code to close trades.)
Han respondido
1
Evaluación
Proyectos
412
36%
Arbitraje
35
26%
/
57%
Caducado
63
15%
Libre
2
Evaluación
Proyectos
1039
44%
Arbitraje
50
8%
/
50%
Caducado
116
11%
Libre
3
Evaluación
Proyectos
201
49%
Arbitraje
18
11%
/
44%
Caducado
1
0%
Libre
4
Evaluación
Proyectos
341
58%
Arbitraje
7
14%
/
71%
Caducado
9
3%
Libre
Solicitudes similares
Should be as it but no alarms, also we need to add a deep search so he can see all the preves candles and a memory function so its not slowing down the indicator. for higher time frames daily 4h 1h around 365 days and for lower time frames we do up to 20k bars but both flexible so i can change it later. the memory is important so the indicator is not always recalculating everything when a new candle shows especially
Creating a bot using the Parabolic indicator with a simple interface.. I want a bot that uses the Parabolic SAR indicator only, with these orders attached to it. Boot name : HEMIN .FX Magic number : 000000 …………………………………………………. Trade behavior : regular OR inverse OR only long "buy" OR only short "sell" Timeframe : ………… Period: ……… ………………………………………………….. Lot size : ……………… Break even in points : …
Project: Fix & Schedule My Dual Fibo Standard Fibonacci Bot I have an existing MQ4 expert advisor called "Dual Fibo Standard Fibonacci". It needs to process 1,000 clients. Right now it runs blindly with no schedule and takes way too long. I need you to optimize it so it runs like a professional business with a 50-100 batch printed stamp copy progress log. Please reply with your numbers for this simple layout: * Phase
Hi, I need an experienced NinjaTrader 8/NinjaScript developer to finish or rebuild an automated futures strategy, ideally by the end of this week. I already have the complete TradingView Pine Script reference strategy, an existing ~2,000-line NinjaScript implementation, Playback logs, and known historical benchmark trades. MOST IMPORTANT REQUIREMENT: TRADINGVIEW ↔ NINJATRADER PARITY. The Pine Script is the reference
I need a custom MQL5 indicator for MetaTrader 5. The indicator must automatically print entry, stop loss, and take profit zones on the chart using dots. A critical requirement is that these dots must be non-lagging and absolutely non-repainting. Additionally, the indicator needs to identify and display current supply and demand zones. Please provide the mq5 source code and the ex5 file upon completion
PHANTOM PROTOCOL V1
35 - 150 USD
PHANTOM PROTOCOL V1 – MT5 EXPERT ADVISOR SPECIFICATION Develop a professional MetaTrader 5 (MT5) Expert Advisor named “PHANTOM PROTOCOL V1”. PRIMARY MARKET: - XAUUSD (Gold) - Designed primarily for M15 and H1 timeframes. - The EA must work with both 3-digit and 2-digit gold pricing where applicable. TRADING LOGIC: Use pure price-action and market-structure analysis rather than relying on a single indicator. The EA
Wanna Create A Trading Robot That Uses Liquidity Sweep And Smart Money Concept EA That Works On PC. I want A Developer Who Can Program Exactly My Strategy That Will Be Shared on A Video Upon The Selection. it Should Follow My Rules .It has To be able To Read Price Action, followed By Liquidity Sweep Areas And Combine with Smart Money Concept Knowledge. We Will Talk about Parameters later on . The robot should be able
I need an experienced trading-data specialist who can help me obtain 3–4 years of historical market data compatible with NinjaTrader 8 . The data will be used for trading strategy development, backtesting, and analysis
Need aggressive M1 gold scalper rewrite of Dev3 + 8 strategies. INPUTS: RiskPercent=3, TP=400, SL=300, MaxTrades=6, Mode=BOTH, DailyProfit 15%, DailyLoss -10% LOT = Balance * RiskPercent / 1000 - works for Cent R350 and $1000. 8 STRATEGIES any true = open instantly, check 1 sec: 1 EMA8/21 cross 2 RSI14 30/70 + engulf 3 Engulfing candle 4 BB 20,2 breakout 5 FVG grab M1 6 M5 trend + M1 entry 7 Wick rejection >2 8
I need an experienced MQL5 developer to build a prototype MT5 Expert Advisor called RiskLock. The software should enforce user-defined trading risk rules before trades are executed. It should support risk percentage or fixed monetary risk, calculate position size using account equity, entry price, stop loss, tick value and contract specifications, block or reduce oversized trades, and include daily loss limits
Información sobre el proyecto
Presupuesto
30 - 45 USD
Plazo límite de ejecución
de 1 a 7 día(s)