Updating existing EA

Trabajo finalizado

Plazo de ejecución 19 horas
Comentario del Cliente
One of the best coder I have worked with! Great job!

Tarea técnica

Important

- This EA must control its trades separately. I will be running more than one EA on same currency pair so it must not conflict.

- Drawdown protection must be control as whole account and not just this EA.

- All inputs conditions may change during open trades and all existing trades must follow the new updated rules.


Management

- TimeFrame

- DDprotection = if drawdown reaches certain input, no new trades can be executed. But if first entry has been made it must finish the cycle.

- TP in pips to close all trades made from this EA

- TP in dollars to close all trades made from this EA

- Apply Logic on Open of New Abr Only = True/False

- Allow custom comments inputs - This can be displayed from the comments sections.


Trend confirmation

- Parabolic SAR = Trend confirmation (Allow Input Value and TimeFrame selection) Enable True/False


Entry

- BUY trade Scenario 1 = If hit indicator "Envelopes" on Upper Band check Parabolic Sar on same TF for bullish direction (Allow input valuen change on Parabolic Sar) ENTER Long position and MUST be first Parabolic Sar first dot ONLY. If after first DOT of Parabolic Sar then DO NOT ENTER TRADE!

- Set SL last candle low to close all positions that is opened from this EA

- Set BUY STOP pending order 5pips from first entry (Allow input value change to lot size and pip distance)

- Set BUY STOP pending order 10pips from first entry (Allow input value change to lot size and pip distance)

- Set BUY STOP pending order 15pips from first entry (Allow input value change to lot size and pip distance and True/False to be active or not)

- Set BUY STOP pending order 20pips from first entry (Allow input value change to lot size and pip distance and True/False to be active or not)

- Enter new BUY position on hit LOWER BAND once only with SL 10pips (Allow input value change to lot size and pip distance to SL) from entry 

- Set Trailing SL after 10pips profit (Allow input value change) to follow every pip move. TrailingSL must apply to one or more positions together. If there are more than one open positions opened, EA must calculate trailingSL together to find profit P/L and trail and when hit it must close all together.

- BUY trade Scenario 2 = If hit indicator "Envelopes" on Lower Band check Parabolic Sar on same TF for bullish direction (Allow input value change on Parabolic Sar) enter long position.

- Set SL 10pips (Allow input value change) from entry and to close all positions that is opened from this EA

- Set BUY STOP pending order 5pips from first entry (Allow input value change)

- Set BUY STOP pending order 10pips from first entry (Allow input value change)

- Set BUY STOP pending order 15pips from first entry (Allow input value change and True/False to be active or not)

- Set BUY STOP pending order 20pips from first entry (Allow input value change and True/False to be active or not)

- Set Trailing SL after 10pips profit (Allow input value change) to follow every pip move. TrailingSL must apply to one or more positions together. If there are more than one open positions opened, EA must calculate trailingSL together to find profit P/L and trail as one and close all when trailing SL gets hit.


ALL SELL scenario is to follow Scenario 1 & 2 but reversed.


Dashboard

- To show on the top left hand corner how many positions are opened from the 6 posible entries and show P/L on this EA trades.


Security - Add security in source file so EA can only work when it matchses the account name and number and within expiry date. This is disabled on default setting unless I input the information.

- AccountName

- AccountNumber

- ExpiryDate



Update from existing EA requirements:

1) Add Enable/Disable OsMA trend confirmation rule to enter trade. When there is an opportunity to enter trade, confirm OsMA is above 0 line for BUY and below 0 line for SELL

2) Apply a new rule, to all entries. EA checks for trades to confirm if current candle Envelopes band line is higher than the previous band line and must have options to check different number of previous candles lines to confirm a trade. If I input 2 then it will check that the last 2 candless lines from the Envelopes indicator is higher high or lower low for SELL.

3) Currently first entry from SAR first dot uses SL of the previous candle. Apply an option to use pip SL instead if I choose to.

4) Currently on first Dot SAR entry hitting upper band envelopes it will enter trade, I need to add an option (Enable/Disable) to enable trade when price hit upper band even after first dot of SAR. This ENABLE  trade option is only one time entry when hitting upper band. Second time hitting the upper band will not make any trades until an change of SAR direction and everything will start again.

5) I need to add a new fuction where if the trailing SL is activated with 80 pips gap and price is profiting 100pips. When price profits to 200 pips I like to reduce trailing Gap to 30pips. SO then trailing SL will change from 80 to 30 pips. I require a method so I can change the trailing SL to a smaller value once profit hits a certain number. I would prefer using pips so once price reaches certain pips in profit apply new trailing SL value.

6) First SAR Dot entry now must trade at all times even if old positions are not closed. Currently on first SAR new cycle and price hits upper band envelopes EA must enter first trade BUY or SELL with the same direction of the SAR. But if old direction positions are not close it will not make new entry so I would like to have it so it will still open the new cycle entry even old positions are not closed.

7) Create one SET of rules for UPPER band separating from Lower band rules.  Example, Upper band will have its own Order distance 1,2,3,4,5. Initial TP, SL,MAX trades, Trailing SL, Trailing_fromTrade,BE_on. Currently both upper and lower band is following the same rules.

8) Allow Enable/Disable rule for ""Multi Trade On" Lowerband entry. Currently it is set so only one positions can be opened at a time during one cycle. (One cycle mean from first DOT SAR to last DOT SAR). This option enables to keep entering new trades when price hitting lower band but it must still follow all rules from current settings.

Han respondido

1
Desarrollador 1
Evaluación
(135)
Proyectos
193
42%
Arbitraje
17
29% / 59%
Caducado
28
15%
Libre
2
Desarrollador 2
Evaluación
(258)
Proyectos
395
28%
Arbitraje
69
19% / 49%
Caducado
120
30%
Libre
3
Desarrollador 3
Evaluación
(513)
Proyectos
775
63%
Arbitraje
33
27% / 45%
Caducado
23
3%
Libre
4
Desarrollador 4
Evaluación
(23)
Proyectos
53
9%
Arbitraje
10
20% / 60%
Caducado
11
21%
Libre
Solicitudes similares
algo trading application want to developed Prerequisites for ordering a trading robot Trading robots are programs, which operate according to underlying algorithms. An algorithm is a set of actions that need to be performed in response to certain events. For example, the most common task in algo trading is the identification of the "New bar" event . When the event occurs, the robot checks the emergence of trading
I have list of free indicators in tradingview and i would like to convert them into an mt4 ea, But the EA will have and work based on the indicators features The list of the are listed as follows :> 1. Market Structure Break And Order block. By EmreKb 2. Rainbow Adaptive RSI by LuxAlgo 3. Multiple MA (21,50,100) 4. SuperTrend Please don't apply if can't do this, So we won't ourselves time
Only for developers with experience in debugging, and array-out-of-range issues. A custom indicator seems to work on a static chart, but 1 buffer still has mistakes in it, resulting in a value of 1 for every bar: the code needs to be reviewed and modified, resulting in a working indicator for every symbol, for every timeframe: sometimes when the timeframe is switched, the chart closes automatically, but all the time
Hi I do not know why but my other order have been deleted and it's not me... I do not know what i did wrong, let me explain again. I dont want you to crack a code or decompile. I want to create a scalper EA with the option I do ask. I had somebody built a EA called Drawdown manager for me that I do use to manage risk of any EA that I test and I have the built code. My problem is that I cannot back test this EA Fast
Hello! I am looking for an experienced Pine Script coder to create a custom indicator for mapping market structure based on fractals. The developer must be skilled in Pine Script and have a solid understanding of how to code market structure indicators. Looking forward to working with a talented developer
CHAPTER 1: BASICS 1.THE BASICS 1.1. EXPANSION AND RETRACEMENT Expansion =>occurs when there is an impulse movement towards a direction. Retracement => is the correction movement after an impulse movement. 1.2. FIBBONACCI RETRACEMENT USED TO DETERMINE THE END OF THE RETRACTION MOVEMENT, USUALLY THE PRICE RETRACTS TO 50% OR UNTIL OTE (0.62, 0.705, 0.79) BEFORE ANOTHER IMPULSE MOVEMENT OCCURS. 1.3. BMS - BREAK IN MARKET
I want a program that automatically disables manual trade execution once a specified number of trades have already been placed. ie. After a total of 3 trades have been placed on that day, manual trade execution should be disabled. I want the program to also limit the amount of lots that can be traded in any given day. ie. Maximum of 15 standard lots in any given day. The program should disable manual trade execution
Greetings to all developers that see this post, I have a task, I would like to work with an expert. I have an indicator that is written in the Pine script (TradingView) language; I would like it converted to MQL5, which will then lead to the creation of a trading bot based on the circumstances. I'll give you access to the indicator file
I am looking for a highly sample and ready and tested profitable EA to purchase.if it meets my requirements i will order same one.EA must be low drawdown high profit on any timeframe
i have a ready made SMC EA and looking for optimizing and debugging and also adding back the missing things in the requirement file. Basically work with the current code and refine it to fit the requirement file. Most indicator is already in the EA and the requirement file below are mostly finish. here are the things need to add back and debug based on the requirement file 1. TP from the filter and need to check

Información sobre el proyecto

Presupuesto
100+ USD
Para el ejecutor
90 USD
Plazo límite de ejecución
de 1 a 2 día(s)