DCA EA

MQL4 Asesores Expertos Sripts

Trabajo finalizado

Plazo de ejecución 138 días

Tarea técnica

DCA EA by Trail Results

Please Fully Read and ask questions to insure you can do this job.

Overview

Looking to have an EA that will operate similar to a grid EA with a few differences. The EA will subtract the “current market price” from the “lowest market price”(from the chart) or the “lowest price” that we input. We then take that difference and divide it into equal parts that we specify in the inputs. Once the EA takes profit it will reset using the new “current market price”, and start the process over again. 


Dividing up the trades

The math to divide up the trades is taking the “current market price” and the “lowest market price” and dividing it by a number we input + the “lowest market price” or whatever we input as the “lowest market price”. So if the current market price is 200 and the lowest is 5 and we input to divide the trades by 4, it’ll be 200-5=195 then 195/4=48.5 so a new trade will enter every 48.5 as it goes down until it reaches 5 and 5 is where the 1 additional trade will be added. So it'll actually place 5 trades in this scenario even though the input was set to only divided by 4. It’ll work the same way no matter how many we order we divide into. It'll always add the all time low or lowest price input as an additional trade.


Scaling into trades

As the market price goes lower it enters the new trades which will change the cost basis or average price for that position. The take profit will adjust with the new cost basis also. For example: If the starting market price was at 100 and the lowest market price was 1, we then divide it into 4 parts,(4 parts including 1 for the lowest price we input) so it will place new trades every 24.75 pips((100-1)/4). So the first trade will be at 100, second trade at 75.25, 3rd trade at 50.50, 4th trade at 25.75, and 5th trade at 1. Let's say it goes down to 1 and the lot size is the 1 for each level. The cost bases would be 50.5((100+75.25+50.50+25.75+1) / 5). So the take profit % we input would be based on the new cost basis or average. Let's say the take profit % is 100%, the EA would close all the trades at 101(50.5+50.5) and restart the EA using 101 as the new market price.


Dynamic lots

Taking the current market price and subtracting it from the lowest market price either from the chart or one we specify in the inputs. Then dividing it by the “Divide Trades input”. Then take that answer and subtract it from the market price the same number of times you previously divided by. Now take those figures and divide them all by the "divided risk amount" to get the Dynamic Lot size for each trade as the market price goes down.  


So here's a example

  • Current market Price on the chart: 225

  • Lower price on the chart: 4

  • Divide high and low difference by: 4

  • Divide Risk amount per Sequence by: 5 (Will always be 1 more than the “Divide high and low difference by X” input above)

  • Amount to risk per sequence: $1000


So well have: 

225-4=221 then 221/4=55.25 now 221, 221-55.25=165.75, 165.75-55.25=110.5, 110.5-55.25=55.25

Now $1000/5=$200 so we have:

$200/221=.90 lots for trade 1, $200/165.75=1.21 lots for trade 2, $200/110.5=1.81 lots for trade 3..., $200/55.25=3.62 lots for trade 4 and $200/4=50 lots for trade 5 to finish that sequence.


A Sequence is when one set of orders is running. For the example above that would be 5 trades for that sequence starting at the 225 price. We would like the ability to  push a button on the charts that'll add additional sequences to the same pair, independent from the first sequence that was already entered. So using the example from above, well have 1 set of 5 trades running, then another set of 5 trades can start running at another starting price and so on. The only thing that all the sequences have in common is the averaging cost basis and take profit level if it is the same pair. So multiple sequences on the same pair will all work together to lower the cost bases and will all take profit at the same time.


Pending orders in the sequence

Once an initial trade is entered, the pending orders should only appear 1 at a time. So if there are 5 orders for a sequence, once the first trade has entered the market the 2nd trade should appear as a pending order, and once the second trade level is hit, the 3rd pending order should appear and so on.


INPUTS

  • Current market price - If 0 use the current market price

  • Lowest market price - If 0 use the lowest price on the chart

  • Divide high and low difference by: X

  • Use % of equity to trade per sequence: (true or false)

  • % of equity to trade per sequence: X

  • Use $ amount to be risked per sequence: (true or false)

  • $ amount to be risked per sequence: X

  • Dynamic Lots per Sequence (True or False)

  • Divide Risk amount per Sequence by: X (Will always be 1 more than the “Divide high and low difference by X” input above) not sure if this input is needed..

  • Take profit per pair in % (true or false)

  • Take profit per pair in %: X

  • Take profit per pair in  $ (true or false)

  • Take profit per pair in  $: X

  • Add another sequence of trades each time we place a manual trade: (True or False)



On chart display

Buy Button:

We need a on chart button to place manual buys that will start a sequence at the price we place the buys at, and if we start multiple sequences it will use all the sequences to calculate 1 cost basis. And all the trades for all the sequences will take profit and restart.


Close pair trades button. Will Close all the trades for the chart it's on.

Close all trades button. Will close all open and pending trades for all pairs.

We also need an on screen legend to display the cost bases for each pair traded with a line on the chart to show the cost bases and the take profit levels.

Archivos adjuntos:

Han respondido

1
Desarrollador 1
Evaluación
(12)
Proyectos
14
43%
Arbitraje
3
33% / 33%
Caducado
2
14%
Libre
2
Desarrollador 2
Evaluación
(70)
Proyectos
91
25%
Arbitraje
26
19% / 54%
Caducado
25
27%
Libre
3
Desarrollador 3
Evaluación
(7)
Proyectos
14
21%
Arbitraje
1
0% / 100%
Caducado
3
21%
Libre
4
Desarrollador 4
Evaluación
(1)
Proyectos
2
0%
Arbitraje
1
0% / 100%
Caducado
0
Libre
5
Desarrollador 5
Evaluación
(258)
Proyectos
269
29%
Arbitraje
2
50% / 0%
Caducado
3
1%
Trabaja
Ha publicado: 2 ejemplos
6
Desarrollador 6
Evaluación
(75)
Proyectos
111
50%
Arbitraje
26
31% / 50%
Caducado
9
8%
Libre
Ha publicado: 2 artículos
7
Desarrollador 7
Evaluación
(271)
Proyectos
553
50%
Arbitraje
57
40% / 37%
Caducado
227
41%
Trabaja
8
Desarrollador 8
Evaluación
(162)
Proyectos
289
35%
Arbitraje
18
22% / 61%
Caducado
43
15%
Libre
9
Desarrollador 9
Evaluación
(298)
Proyectos
478
40%
Arbitraje
105
40% / 24%
Caducado
82
17%
Trabajando
Ha publicado: 2 ejemplos
Solicitudes similares
Experienced Trading Software Developer Needed – Multi-Platform Development Hello! I'm looking for an experienced developer to create a custom trading indicator and convert it into an automated trading bot for the following platforms: MT5 NinjaTrader 8 Quantower cTrader The plan is to develop the same indicator and trading bot for all four platforms, one after another. Project requirements: Custom trading indicator
un écosystème logiciel asynchrone multi-comptes dopé par un module de supervision par Intelligence Artificielle (Guardian AI). La solution assure le pilotage automatisé, le filtrage de marché en temps réel et le contrôle des risques pour 20+ comptes MetaTrader 4/5 (via MetaApi) et Deriv sur VPS Equinix NY4. vous aurez plus de detail dans les échanges
Order flow 30+ USD
Hi! I need an experience developer with order flow, volume delta, and futures scalping, and I wanted to ask you a few questions. Have you personally developed and tested fast-paced strategies for Gold Futures (GC), particularly those that enter during short-term price impulses and scale into positions as momentum builds? From your experience, what indicators or signals help you determine whether an impulse has enough
I am looking for an experienced MQL5 developer for the first milestone of a larger MetaTrader 5 project: a multi-symbol, multi-timeframe signal scanner with alerts. This milestone covers indicator integration only. There is no order placement or trade management at any stage. Scope of this milestone Read outputs from three custom indicators (provided as compiled files after selection and NDA) reliably via iCustom and
RA_BOT 2.0 36+ USD
//@version=4 study(title="UT Bot Alerts", overlay = true) // Inputs a = input(1, title = "Key Vaule. 'This changes the sensitivity'") c = input(10, title = "ATR Period") h = input(false, title = "Signals from Heikin Ashi Candles") xATR = atr(c) nLoss = a * xATR src = h ? security(heikinashi(syminfo.tickerid), timeframe.period, close, lookahead = false) : close xATRTrailingStop = 0.0 xATRTrailingStop := iff(src >
Andrew 50 - 200 USD
Hello, I am from Tanzania. I am looking for a professional MQL5 programmer from Tanzania who can help me develop and improve my automated MT5 trading robot. The project is called SMC XAVAGE AI, and it trades XAUUSD (Gold). I would like to discuss the project with you. Are you based in Tanzania? Would it be possible to arrange a meeting or a call? Thank you
Metafix 50 - 200 USD
Here is a professional specification you can send directly to your developer. # Project Requirements Specification: MetaTrader 5 Trading Robot Development ### 1. Project Overview I want to develop an automated Forex trading robot (Expert Advisor) for MetaTrader 5 (MT5). The robot should analyse the financial markets, identify trading opportunities, and execute trades automatically based on predefined strategies. ###
1. Platform: MT4 The EA required is not linked, neither depending on trading strategy nor trading signals nor indicators. 2. Initial order is a pending order (buy stop/ sell stop) and it is created manually. It is open for a specified symbol (pair) at a specified price with a specified S/L 3. Example: buy stop 0.1 lot GBPUSD @ 1.3085 WITH S/L @1.3075 Once target price is reached, pending order will
I am looking for an experienced trading software developer interested in building a long-term working relationship. Im a professional Trader, Coach and Mentor, I work with traders and Student who require customized trading solutions, including automated trading bots, Expert Advisors, custom indicators, trading strategies and other algorithmic trading tools. I am looking for a technically skilled developer who can
Salman serhal 30 - 100 USD
MT5 ICT XAUUSD Sell-Only Trading Robot with Fibonacci Confirmation I am looking for an experienced MQL5 developer to create a custom Expert Advisor (EA) for MetaTrader 5, specifically for trading Gold (XAUUSD). 1. Trading Strategy The robot must use the ICT trading methodology and focus on SELL trades only. The strategy should include: * Identify important resistance and premium zones. * Use Fibonacci retracement

Información sobre el proyecto

Presupuesto
80+ USD