It is not that "take profit" does not work, nor that "take profit" is not set to the specified level, but that "take profit" is set, and there is no "take profit" at all.
zbairen985 #: It is not that "take profit" does not work, nor that "take profit" is not set to the specified level, but that "take profit" is set, and there is no "take profit" at all.
Thanks for the data provided, I fixed the error, please update the version of your utility.
Another problem with the "grid manual MT5 v2.5" version is that when I set "take profit" to zero, I can no longer manually modify the point value of "takeprofit". As long as I manually modify the point value of "takeprofit", the "takeprofit" will be reset to zero by this utility. This is what I don't want. A similar situation does not exist for "stop loss". I hope the author can improve the behavior of "takeprofit" to the same behavior as "stop loss". Thank you!
zbairen985 #: Another problem with the "grid manual MT5 v2.5" version is that when I set "take profit" to zero, I can no longer manually modify the point value of "takeprofit". As long as I manually modify the point value of "takeprofit", the "takeprofit" will be reset to zero by this utility. This is what I don't want. A similar situation does not exist for "stop loss". I hope the author can improve the behavior of "takeprofit" to the same behavior as "stop loss". Thank you!
Hello,
checked the take profit with your settings, the take profit changes without problems.
Take a look at the gif image that I attached to this post and try to do the same.
If I checked the wrong thing, then write about it.
checked the take profit with your settings, the take profit changes without problems.
Take a look at the gif image that I attached to this post and try to do the same.
If I checked the wrong thing, then write about it.
What I mean is that after "grid manual MT5 v2.5" sends "pending orders" with "take profit" of zero, it is better to manually set and modify the point values of these "take profits", rather than the "grid manual MT5" to set and modify the point values of "take profits" of these "pending orders".
In this regard, when "stop loss" is zero, it is possible to manually set and modify the point value of "stop loss", so why can't "take profit"? I think it can be realized after the improvement and optimization of the "grid manual MT5 v2.5" code.
I am looking forward to such improvement. I also believe that this is the common desire of most users who use this utility.
What I mean is that after "grid manual MT5 v2.5" sends "pending orders" with "take profit" of zero, it is better to manually set and modify the point values of these "take profits", rather than the "grid manual MT5" to set and modify the point values of "take profits" of these "pending orders".
In this regard, when "stop loss" is zero, it is possible to manually set and modify the point value of "stop loss", so why can't "take profit"? I think it can be realized after the improvement and optimization of the "grid manual MT5 v2.5" code.
I am looking forward to such improvement. I also believe that this is the common desire of most users who use this utility.
Here I thank you for your hard work!
In the last update, I added just this function. Set the "TP Type" parameter to Off. In this state, the Utility will not control the take profit. And you can set take profit of open orders at any level.
In the last update, I added just this function. Set the "TP Type" parameter to Off. In this state, the Utility will not control the take profit. And you can set take profit of open orders at any level.
The result of my test is that no matter what value I set "TP" (even including zero), I can only modify "TP" through the "grid manual MT5 v2.5" panel, and can not modify "TP" through any other methods (including pure manual). However, there is no such situation when modifying "SL". Please test the problem yourself. thank you!
The result of my test is that no matter what value I set "TP" (even including zero), I can only modify "TP" through the "grid manual MT5 v2.5" panel, and can not modify "TP" through any other methods (including pure manual). However, there is no such situation when modifying "SL". Please test the problem yourself. thank you!
Have you checked the TP Type = Off mode? If it is difficult for you to check, then just look at the gif image.
Through your "GIF" image, I can see the "TP type = off" mode. The problem that "TP" cannot be modified manually has been solved. Thank you very much for your advice!
Hello, I have bought Grid Manual MT5, I want to comment that already the first day I had recovered the investment, I have been happy with this. I want to congratulate the author for the instruction manual, it is very well prepared and perfectly explains the operation of the EA, it is one of the best I have seen so far.
However, in the evaluation of the product I have given it 3.5 stars, due to some not so good aspects that I have discovered with the EA in real account, this EA needs to improve the performance of the operations and to correct some strange bugs:
1.- The EA has a performance problem if you work in MT5 on a MAC pc, and if you use it in MT5 on windows, it works a little better, but it is still slow. This affects operations that need to be done quickly such as opening a new BUY / SELL after having reached the TP in a previous operation, the EA takes a long time to close the "Limit" or "Stop" operations that have been left open and in clearing the lines of the grid that are shown on the screen, during this time it is not possible to carry out a new BUY or SELL and the opportunity to open a new operation in the same direction of the market is lost. It also affects the time it takes to open a new "Limit" or "Stop" trade when the candle reaches one of the GRID levels, if the candle goes relatively fast it can go above the next level and the EA has not yet cast the "Limit or Stop" Order from there the problems begin, since it is left trying to place the order at the price that corresponds to it and cannot do so since the price has already been exceeded. The part that I have seen the most performance problems is when you want to redistribute the Grid levels to a new position and redistribute them properly, it takes a long time to do this and save each change (in point 3 I include some suggestions).
2.- Another aspect that worried me a lot is that the "Stop Lost" sometimes moves from its initial position (which must go to the end of the last level of the GRID) and is positioned several previous levels, this has made me lose some operations by closing them before reaching the last level of the GRID and I did not like it very much, it seems that at some point in EA I recalculate the positions of the GRID and there must be some Bugs when performing the calculation, many times I have been able to move the Stop Lost manually so that It does not affect, but, another time I have left the EA unattended and it has caused me unnecessary losses. Attached Images that I have captured when the "Stop Lost" repositioning Bugs occurs.
3.- I miss a third option of the "Step Type" parameter (now it only allows Fixed or ATR) and I think that developing this option would not cost much, this option could be called "Incremental Factor" or "% Factor", where it is indicated the initial distance of the Grid (like now) and an additional parameter or incremental factor like: 1.2 or 1.5 etc. (I add an example image of how it would work). the first level of the Grid would be at the initial distance indicated (as when the fixed option is used) and from there the following levels are increased by the %Factor indicated, if the fixed distance indicated is 300 (points) and the incremental factor is 1.2 (ie) the first level of the Grid would be at a distance of 300, the second at 360 points from the first, the third at 432 points from the second and so on.
1) The utility has no resource-intensive functions, and it cannot slow down the terminal. I recommend checking your indicators, I'm sure that they slow down your terminal. How to check it: just run the utility on a clean terminal, where your indicators are not, and you will see if the utility affects the performance of the terminal. The second step is to launch your indicators and check how the terminal performance changes.
2)
it's hard for me to say anything about this, because I don't see what settings you use, and I don't see that the stop loss is moved by this particular utility.
- show the settings you are using.
- show the log files, where you can see that the orders are modified by this particular utility.
Also, 4 buttons are missing in your panel (they are circled in red). Are they always missing? Check the panel on a clean terminal with no indicators installed.
Здравствуйте. В тестере можно выставлять уровень безубытка в минус (-200). На реале нельзя. Можно исправить и поправить, чтобы на реале тоже можно было выставлять?
Vladimir_uspeh #: Здравствуйте. В тестере можно выставлять уровень безубытка в минус (-200). На реале нельзя. Можно исправить и поправить, чтобы на реале тоже можно было выставлять?
Если быть точнее, выставить можно при добавлении на график. Только он не работает.
It is not that "take profit" does not work, nor that "take profit" is not set to the specified level, but that "take profit" is set, and there is no "take profit" at all.
Thanks for the data provided, I fixed the error, please update the version of your utility.
我使用默认设置检查了该实用程序，它按预期工作，并将止盈设置在需要的位置。
为了在最短的时间内解决问题，我至少需要看到问题并在我的电脑上重现它。我需要确保这确实是一个错误并且您设置了正确的设置。
因此，您需要提供以下信息：
1) 您正在使用的设置。
2) 日志文件，位于“专家”和“日志”选项卡上。
3) 并解释“止盈不起作用”是什么意思：止盈未设置到指定水平，还是根本没有？
This problem has been solved in the new version 2.5. Thank you!
Another problem with the "grid manual MT5 v2.5" version is that when I set "take profit" to zero, I can no longer manually modify the point value of "takeprofit". As long as I manually modify the point value of "takeprofit", the "takeprofit" will be reset to zero by this utility. This is what I don't want. A similar situation does not exist for "stop loss". I hope the author can improve the behavior of "takeprofit" to the same behavior as "stop loss". Thank you!
Hello,
checked the take profit with your settings, the take profit changes without problems.
Take a look at the gif image that I attached to this post and try to do the same.
If I checked the wrong thing, then write about it.
Hello,
checked the take profit with your settings, the take profit changes without problems.
Take a look at the gif image that I attached to this post and try to do the same.
If I checked the wrong thing, then write about it.
What I mean is that after "grid manual MT5 v2.5" sends "pending orders" with "take profit" of zero, it is better to manually set and modify the point values of these "take profits", rather than the "grid manual MT5" to set and modify the point values of "take profits" of these "pending orders".
In this regard, when "stop loss" is zero, it is possible to manually set and modify the point value of "stop loss", so why can't "take profit"? I think it can be realized after the improvement and optimization of the "grid manual MT5 v2.5" code.
I am looking forward to such improvement. I also believe that this is the common desire of most users who use this utility.
Here I thank you for your hard work!
What I mean is that after "grid manual MT5 v2.5" sends "pending orders" with "take profit" of zero, it is better to manually set and modify the point values of these "take profits", rather than the "grid manual MT5" to set and modify the point values of "take profits" of these "pending orders".
In this regard, when "stop loss" is zero, it is possible to manually set and modify the point value of "stop loss", so why can't "take profit"? I think it can be realized after the improvement and optimization of the "grid manual MT5 v2.5" code.
I am looking forward to such improvement. I also believe that this is the common desire of most users who use this utility.
Here I thank you for your hard work!
In the last update, I added just this function. Set the "TP Type" parameter to Off. In this state, the Utility will not control the take profit. And you can set take profit of open orders at any level.
In the last update, I added just this function. Set the "TP Type" parameter to Off. In this state, the Utility will not control the take profit. And you can set take profit of open orders at any level.
The result of my test is that no matter what value I set "TP" (even including zero), I can only modify "TP" through the "grid manual MT5 v2.5" panel, and can not modify "TP" through any other methods (including pure manual). However, there is no such situation when modifying "SL". Please test the problem yourself. thank you!
The result of my test is that no matter what value I set "TP" (even including zero), I can only modify "TP" through the "grid manual MT5 v2.5" panel, and can not modify "TP" through any other methods (including pure manual). However, there is no such situation when modifying "SL". Please test the problem yourself. thank you!
Have you checked the TP Type = Off mode? If it is difficult for you to check, then just look at the gif image.
您是否检查了 TP Type = Off 模式？如果您很难检查，那么只需查看 gif 图像。
Through your "GIF" image, I can see the "TP type = off" mode. The problem that "TP" cannot be modified manually has been solved. Thank you very much for your advice!
Dear author, could you please add an input to define after how many orders in grid step to increase the lot size instead increasing it on every order.
e.g. with Starting lot=0.01 and Lot multiplier 1.5 with current version the grid would be: 0.01, 0.02, 0.05, 0.08, 0.12, ..
with new requested setting Lot multiplier step=2 the grid would be: 0.01, 0.01, 0.02, 0.02, 0.05, 0.05, 0.08, 0.08, 0.12, 0.12, ..
Thanks
Dear author, could you please add an input to define after how many orders in grid step to increase the lot size instead increasing it on every order.
e.g. with Starting lot=0.01 and Lot multiplier 1.5 with current version the grid would be: 0.01, 0.02, 0.05, 0.08, 0.12, ..
with new requested setting Lot multiplier step=2 the grid would be: 0.01, 0.01, 0.02, 0.02, 0.05, 0.05, 0.08, 0.08, 0.12, 0.12, ..
Thanks
I support!!!
Dear author, could you please add an input to define after how many orders in grid step to increase the lot size instead increasing it on every order.
e.g. with Starting lot=0.01 and Lot multiplier 1.5 with current version the grid would be: 0.01, 0.02, 0.05, 0.08, 0.12, ..
with new requested setting Lot multiplier step=2 the grid would be: 0.01, 0.01, 0.02, 0.02, 0.05, 0.05, 0.08, 0.08, 0.12, 0.12, ..
Thanks
I support!!!
Hello, okay, I'll try to implement it in the next update.
Hello, I have bought Grid Manual MT5, I want to comment that already the first day I had recovered the investment, I have been happy with this. I want to congratulate the author for the instruction manual, it is very well prepared and perfectly explains the operation of the EA, it is one of the best I have seen so far.
However, in the evaluation of the product I have given it 3.5 stars, due to some not so good aspects that I have discovered with the EA in real account, this EA needs to improve the performance of the operations and to correct some strange bugs:
1.- The EA has a performance problem if you work in MT5 on a MAC pc, and if you use it in MT5 on windows, it works a little better, but it is still slow. This affects operations that need to be done quickly such as opening a new BUY / SELL after having reached the TP in a previous operation, the EA takes a long time to close the "Limit" or "Stop" operations that have been left open and in clearing the lines of the grid that are shown on the screen, during this time it is not possible to carry out a new BUY or SELL and the opportunity to open a new operation in the same direction of the market is lost. It also affects the time it takes to open a new "Limit" or "Stop" trade when the candle reaches one of the GRID levels, if the candle goes relatively fast it can go above the next level and the EA has not yet cast the "Limit or Stop" Order from there the problems begin, since it is left trying to place the order at the price that corresponds to it and cannot do so since the price has already been exceeded. The part that I have seen the most performance problems is when you want to redistribute the Grid levels to a new position and redistribute them properly, it takes a long time to do this and save each change (in point 3 I include some suggestions).
2.- Another aspect that worried me a lot is that the "Stop Lost" sometimes moves from its initial position (which must go to the end of the last level of the GRID) and is positioned several previous levels, this has made me lose some operations by closing them before reaching the last level of the GRID and I did not like it very much, it seems that at some point in EA I recalculate the positions of the GRID and there must be some Bugs when performing the calculation, many times I have been able to move the Stop Lost manually so that It does not affect, but, another time I have left the EA unattended and it has caused me unnecessary losses. Attached Images that I have captured when the "Stop Lost" repositioning Bugs occurs.
3.- I miss a third option of the "Step Type" parameter (now it only allows Fixed or ATR) and I think that developing this option would not cost much, this option could be called "Incremental Factor" or "% Factor", where it is indicated the initial distance of the Grid (like now) and an additional parameter or incremental factor like: 1.2 or 1.5 etc. (I add an example image of how it would work). the first level of the Grid would be at the initial distance indicated (as when the fixed option is used) and from there the following levels are increased by the %Factor indicated, if the fixed distance indicated is 300 (points) and the incremental factor is 1.2 (ie) the first level of the Grid would be at a distance of 300, the second at 360 points from the first, the third at 432 points from the second and so on.
Thank you for your Job.
Hello.
1) The utility has no resource-intensive functions, and it cannot slow down the terminal. I recommend checking your indicators, I'm sure that they slow down your terminal. How to check it: just run the utility on a clean terminal, where your indicators are not, and you will see if the utility affects the performance of the terminal. The second step is to launch your indicators and check how the terminal performance changes.
2)
it's hard for me to say anything about this, because I don't see what settings you use, and I don't see that the stop loss is moved by this particular utility.
- show the settings you are using.
- show the log files, where you can see that the orders are modified by this particular utility.
Also, 4 buttons are missing in your panel (they are circled in red). Are they always missing? Check the panel on a clean terminal with no indicators installed.
3) Ok, I will think about your offer.
Здравствуйте. В тестере можно выставлять уровень безубытка в минус (-200). На реале нельзя. Можно исправить и поправить, чтобы на реале тоже можно было выставлять?
Если быть точнее, выставить можно при добавлении на график. Только он не работает.