Фриланс-сервис на MQL5.com: Covert trading view indi Pine script to MT5/MQL5 EA.

Описание

Техническое задание

Hello i want to covert trading view indi Pine script to MT5/MQL5 EA.

Please tell me if you can do asap.

bellow is my source code:

//@version=5

indicator("V1.1.1 SQZMOM - CM_Ult và VFI", shorttitle="V1.1.1 SQZ-CM.Ult-VFI (SSG)", overlay=true)

// Điều kiện: 3 nến liên tiếp có xu hướng tăng

//cond = (close > open) and (close[1] > open[1]) and (close[2] > open[2])

// Tính toán độ dài của râu cho nến hiện tại

wick_length = high - math.max(open, close) // Râu trên nen hien tai

tail_length = math.min(open, close) - low // Râu dưới nen hien tai

body_length = math.abs(close - open) // Tính toán độ dài của thân nến hien tai

bhasWick = wick_length > 0 and tail_length > 0 // true neu co ca 2 rau

has_tail = tail_length > 0 // co rau duoi

has_wick = wick_length > 0 // co rau tren

wick_length1 = high[1] - math.max(open[1], close[1]) // Râu trên nen 1

tail_length1 = math.min(open[1], close[1]) - low[1] // Râu dưới nen 1

body_length1 = math.abs(close[1] - open[1]) // Tính toán độ dài của thân nến 1

has_tail1 = tail_length1 > 0 // co rau duoi

has_wick1 = wick_length1 > 0 // co rau tren

wick_length2 = high[2] - math.max(open[2], close[2]) // Râu trên nen 1

tail_length2 = math.min(open[2], close[2]) - low[2] // Râu dưới nen 1

body_length2 = math.abs(close[2] - open[2]) // Tính toán độ dài của thân nến 1

has_tail2 = tail_length2 > 0 // co rau duoi

has_wick2 = wick_length2 > 0 // co rau tren

condUp = (close > open) and (not has_tail) and (close[1] > open[1]) and (close[2] > open[2])

condDown = (close < open) and (not has_wick) and (close[1] < open[1]) and (close[2] < open[2])

condUpAll = (close > open) and (not has_tail) and (close[1] > open[1]) and (not has_tail1) and (close[2] > open[2]) and (not has_tail2)

condDownAll = (close < open) and (not has_wick) and (close[1] < open[1]) and (not has_wick1) and (close[2] < open[2]) and (not has_wick2)

bCheckABS = input(false, title="Kiểm tra giá trị tuyệt đối nến trước")

// tich hop de them dieu kien check theo SQZMOM

//------------BEGIN- SQZMOM-----------------------

length = input(20, title="BB Length")

mult = input(2.0,title="BB MultFactor")

lengthKC=input(20, title="KC Length")

multKC = input(1.5, title="KC MultFactor")

useTrueRange = input(true, title="Use TrueRange (KC)")

// Calculate BB

source = close

basis = ta.sma(source, length)

dev = multKC * ta.stdev(source, length)

upperBB = basis + dev

lowerBB = basis - dev

// Calculate KC

ma = ta.sma(source, lengthKC)

myRange = useTrueRange ? ta.tr : (high - low)

rangema = ta.sma(myRange , lengthKC)

upperKC = ma + rangema * multKC

lowerKC = ma - rangema * multKC

sqzOn = (lowerBB > lowerKC) and (upperBB < upperKC)

sqzOff = (lowerBB < lowerKC) and (upperBB > upperKC)

noSqz = (sqzOn == false) and (sqzOff == false)

val = ta.linreg(source - math.avg(math.avg(ta.highest(high, lengthKC), ta.lowest(low, lengthKC)),ta.sma(close,lengthKC)), lengthKC,0)

//bcolor = iff( val > 0, iff( val > nz(val[1]), color.lime, color.green), iff( val < nz(val[1]), color.red, color.maroon))

bcolor = ( val > 0 ? ( val > nz(val[1])? color.lime: color.green): ( val < nz(val[1])? color.red : color.maroon))

scolor = noSqz ? color.blue : sqzOn ? color.black : color.gray

// nến hiện tại không râu

condUpSQZ = (val > 0)

condDownSQZ = (val < 0)

bCandleUp = (body_length > body_length1) and (close > open) and (close[1] > open[1])

bCandleDown = (body_length > body_length1) and (close < open) and (close[1] < open[1])

// end dieu kien than nen

// ---------kiem tra them dieu kien vơi chi so CM -Ult

ource = close

useCurrentRes = input(true, title="Use Current Chart Resolution?")

resCustom = input("60", title="Use Different Timeframe? Uncheck Box Above")

//resCustom = input(title="Use Different Timeframe? Uncheck Box Above", type=resolution, defval="60")

smd = input(true, title="Show MacD & Signal Line? Also Turn Off Dots Below")

sd = input(true, title="Show Dots When MacD Crosses Signal Line?")

sh = input(true, title="Show Histogram?")

macd_colorChange = input(true,title="Change MacD Line Color-Signal Line Cross?")

hist_colorChange = input(true,title="MacD Histogram 4 Colors?")

// Determine the current chart's resolution

currentResolution = timeframe.period

// Use the custom resolution if specified, or use the current chart's resolution

selectedResolution = na(resCustom) ? currentResolution : resCustom

res = useCurrentRes ? timeframe.period : resCustom

fastLength = input.int(12, minval=1)

slowLength=input.int(26,minval=1)

signalLength=input.int(9,minval=1)

fastMA = ta.ema(source, fastLength)

slowMA = ta.ema(source, slowLength)

macd = fastMA - slowMA

signal = ta.sma(macd, signalLength)

hist = macd - signal

outMacD = request.security(syminfo.tickerid, res, macd)

outSignal = request.security(syminfo.tickerid, res, signal)

outHist = request.security(syminfo.tickerid, res, hist)

histA_IsUp = outHist > outHist[1] and outHist > 0

histA_IsDown = outHist < outHist[1] and outHist > 0

histB_IsDown = outHist < outHist[1] and outHist <= 0

histB_IsUp = outHist > outHist[1] and outHist <= 0

//MacD Color Definitions

macd_IsAbove = outMacD >= outSignal

macd_IsBelow = outMacD < outSignal

// bổ sung thêm điều kiện tuyệt đối

bspan = true

if bCheckABS

bspan := (outMacD != outSignal) and (math.abs(outMacD -outSignal) > math.abs(outMacD[1] -outSignal[1]))

macd_IsAbove := macd_IsAbove and bspan

macd_IsBelow := macd_IsBelow and bspan

// end điều kiện

condUpSQZ_CM_Ult = condUpSQZ and macd_IsAbove

condDownSQZ_CM_Ult = condDownSQZ and macd_IsBelow

//---

// ---- --begin tich hop them dieu kien kiem tra VFI

lengthVFI = input(130, title="VFI length")

coef = input(0.2)

vcoef = input(2.5, title="Max. vol. cutoff")

signalLengthVFI=input(5)

smoothVFI=input(false)

ma(x,y) => smoothVFI ? ta.sma(x,y) : x

typical=hlc3

inter = math.log( typical ) - math.log( typical[1] )

vinter = ta.stdev(inter, 30 )

cutoff = coef * vinter * close

vave = ta.sma( volume, lengthVFI )[1]

vmax = vave * vcoef

vc = (volume < vmax ? volume :vmax) //min( volume, vmax )

mf = typical - typical[1]

vcp = ( mf > cutoff ? vc : ( mf < -cutoff ? -vc :0))

vfi = ma(math.sum( vcp , lengthVFI )/vave, 3)

vfima=ta.ema( vfi, signalLengthVFI )

d=vfi-vfima

// them dieu kien tuyet doi để dự đoán xu hướng 2 đường đang tách nhau ra xa

spanvfi = true

if bCheckABS

spanvfi := (vfi != vfima) and (math.abs(d) > math.abs(vfi[1] -vfima[1]))

// end dieu kien tuyet doi

condDown_VFI = (d < 0) and spanvfi

condUp_VFI = (d >=0) and spanvfi

// -------------------end kiem tra VFI

// ket hop cac điều kiện

condUpSQZ_CM_VFI = condUpSQZ_CM_Ult and condUp_VFI and bCandleUp

condDownSQZ_CM_VFI = condDownSQZ_CM_Ult and condDown_VFI and bCandleDown

//Dừng lệnh BUY hoặc SELL

bstop = (((close > open) and (close[1] > open[1]) and (has_tail)) or ((close < open) and (close[1] < open[1]) and (has_wick))) //or body_length < 0.333 * body_length1

// end test

plotshape(condUpSQZ_CM_VFI, style=shape.triangleup, title="BUY WITH SQZMOM vs CM_Ult vs VFI", location=location.bottom , color=color.purple,size=size.tiny)

alertcondition(condUpSQZ_CM_VFI, title="BUY WITH SSG SQZMOM And CM_Ult vs VFI", message="Xu hướng tăng & SQZMOM & CM_Ult vs VFI")

plotshape(condDownSQZ_CM_VFI, style=shape.triangledown, title="SELL WITH SQZMOM vs CM_Ult vs VFI", location=location.bottom, color=color.purple, size=size.tiny)

alertcondition(condDownSQZ_CM_VFI, title="SELL WITH SQZMOM And CM_Ult vs VFI", message="Xu hướng giảm & SQZMOM & CM_Ult vs VFI")

plotshape(bstop, style=shape.xcross, title="STOP ALL 2.0", location=location.abovebar, color=color.red, size=size.tiny)

Откликнулись

Оценка

(203)

Проекты

214

75%

Арбитраж

Просрочено

Свободен

Оценка

(2)

Проекты

Арбитраж

0% / 100%

Просрочено

Свободен

Оценка

(132)

Проекты

178

39%

Арбитраж

25% / 50%

Просрочено

Свободен

Похожие заказы

I need an MQL5 indicator that identifies reversals without repainting or placing signals with an offset. The goal is to minimize lag and reduce whipsaw trades. Desired results are similar to the attached image. Requirements: - No repainting - No signal offset - Emphasis on reducing lag - MQL5 compatible - Clear, concise code If you have the expertise to create a reliable, high-performance indicator, let's discuss

I'm looking for a skilled trader/developer to share a proven scalping strategy on M1-M5 timeframes without using Martingale, Grid trading, or Hedge. Requirements: - Minimum trade duration: 2 minutes - Lot size: <20 - Proof of skill: Provide MT4/MT5 trade history report (PDF/HTML) - No High Frequency Trades - GMT+1 timezone, flexible hours - Price negotiable, performance-based compensation possible If you're a

Create a script. The purpose of the script is to catch changes in the trend and execute a trade. We will include a single indicator that is used as a signal. The stop loss is defined. Here is the blueprint: The indicator is Donchain Channels. The parameters are Lenght 20, Offset: 0. The timeframe is 1H. Instrument is EUR/USD. Condition: use candle close as parameter to execute a BUY or SELL order. if the Donchain

I'm looking for an experienced MQL5 developer to help with backtesting, optimization, and VPS setup for a prop firm EA on XAUUSD (Gold). Scope of work - Backtest and optimize using high-quality tick data from Dukascopy or Polygon (2020–2025) - Perform Monte Carlo and Walk-Forward testing to optimize parameters like ATR multipliers and risk % - VPS installation and configuration for continuous MT5 operation - Apply

Good day, I would like to build an automated trading system for Ninjatrader using 2 MACD, a Supertrend, and a moving average indicator. I want the option to adjust the indicator settings, the ability to trade at three different times, and the option to receive alerts. I want to get an idea of what that will cost me. It will enter trades on all blue take one contract out at a fixed point, move the stop to break even

Transform Your Trading Strategy into a Powerful Automated Reality! Are you looking for a reliable developer to automate your trading edge? I specialize in creating high-performance Expert Advisors (EAs) and custom indicators for MT5, tailored exactly to your unique trading rules. Why work with me? Tailor-Made Solutions: Whether it’s SMC (Smart Money Concepts), ICT, Grid, Martingale, or Scalping—I code it all based on

💡🤝 I am open to various proposals and product ideas — cooperation, partnership, or joint ventures are welcome. 🛂✈️ I can also assist with arranging a visa or passport for a European Union country 🇪🇺 ✅🤝 I am looking for an honest, reliable, and serious partner. 🚫❌ Serious offers only, please. 📩💬 Feel free to contact me if you are genuinely interested

I am looking for an experienced MQL5 developer to create a high-performance Super Scalper EA for MetaTrader 5, designed specifically for XAUUSD trading on IC Markets. Only serious developers with proven scalping experience should apply. 🔧 General Requirements Platform: MetaTrader 5 (MT5) Instrument: XAUUSD Timeframe: M1 – M15 Broker: IC Markets Initial capital: $100–150 USD Minimum lot: 0.01 Risk per trade

Hi! I need a trading bot/robot to automate my trades. I don't need much complicated bot. I want it to enter, exit trade and can do this in matter of second or multiple times in a second. Should be able to adjust, put SL/TP in the same menu. Would appreciate your ideas! Please write to me before anything else

I need bot that will auto execute trades bases on my price-action strategies all entries on XAUUSD and fire webhooks straight into my Exness MT5 account so trades are opened, managed, and closed without manual intervention. Core logic • Entry signals come exclusively from candlestick patterns. The exact patterns (e.g. Engulfing, Doji, Hammer) can be finalised together once you are on board, but the code must make it

Информация о проекте

Бюджет

30 - 100 USD

Качество технического задания
Качество проверки результатов
Доступность и навыки общения