1) Added parameter: 'Coloring the cells according to' — paint the cells of the table according to the levels of overbought/oversold or according to the direction of the previous candle. 2) Added the ability to run several indicators on one chart.
----------------------------------
1) Добавлен параметр: "Coloring the cells according to the" - расцветка ячеек согласно уровням или предыдущей свече. 2) Добавлена возможность запускать несколько индикаторов на одном графике.
Great indicator. I use it to find strength and weekness in the market. Together with the stochastics Dashboard I am able to find currency momentum and direction. When used right, you can't go wrong
Is the indicator waiting for H1 bar to close to give alert ?
Hello.
Alert "combined in a row" always works once a bar and it does not depend on the closing of the candle. So
if you have a minimum TF = M5, then this alert will trigger no more than once every 5 minutes.
This can occur at any time throughout the current bar.
I chose H1 up to w1 for viewing on the RSI table but I would like to have alerts lets say only for M15 and H1
for overbought/oversold (The time when both are overbought or oversold). Can the indicator do that? because when I put "All timeframes
are overbought/oversold M15 H1 it didn't give me any signals. Also i have pop up alert true
I chose H1 up to w1 for viewing on the RSI table but I would like to have alerts lets say only for M15 and
H1 for overbought/oversold (The time when both are overbought or oversold). Can the indicator do that? because when I put "All
timeframes are overbought/oversold M15 H1 it didn't give me any signals. Also i have pop up alert true
THANKS!
Hello.
In the strategy tester, alerts come. I chose these two periods.
In the strategy tester, alerts come. I chose these two periods.
As I can see from the picture you have only M15 and H1 on the RSI table. If you had M15 H1 H4 D1 on the RSI table and asked for alerts for M15 and H1
combined It wouldn't give you alerts. Could you please check this also?
Windsurfer: As I can see from the picture you
have only M15 and H1 on the RSI table. If you had M15 H1 H4 D1 on the RSI table and asked for alerts for M15 and H1 combined It wouldn't give you
alerts. Could you please check this also?
The parameter "All timeframes are Overbought / Oversold" is only for all timeframes at the same time. Do you
only need the "M15 H1"? So set them in the parameters.
Dear Sir I don't know what's going on. I just purchase your Dashboard RSI Multicurrency today.
I wanted to check to see if the MTF RSI Dashboard alerts RSI (8) to send an alert only when there's a candle close 1 candle back from the open
1)Buy Crosses & Closes above the 50 Level for Buy Signal Alerts 2)Sell Crosses & Closes below the 50 Level for Sell Signal Alerts
Trying to quickly follow Steve Primo short term trends https://www.forexfactory.com/thread/post/13224563#post13224563
01 MTF RSI Multi Pair Dashboard v1 & MTF STOCH Multi Pair Dashboard+1 Indicators from CJA ForexFactory Thread Both have The Candle close features 1 candle back). But doesn't have the value or Alerts feature in any of the indicators. Your Insights will be highly appreciated
***Till my Dismay Sir Once I made the purchase my Market Indicator Folder dissappeared & I have no way to get it back. I can't access the folder at all please help Taras
I wanted to check to see if the MTF RSI Dashboard alerts RSI (8) to send an alert only when there's a candle close 1 candle back from the open
Hello.
For the indicator to send alerts only when the candle is closed, you need to change the "Check alerts only on bar closing" parameter.
rainsome:
But doesn't have the value or Alerts feature in any of the indicators.
Also, the alert is sent once to the bar. If the bar has already been closed before, there will be no alert. If you restart the indicator (change the parameters, or the period, or the chart symbol), then MT4 resets all variables and you again need to wait for the bar to close.
rainsome:
***Till my Dismay Sir Once I made the purchase my Market Indicator Folder dissappeared & I have no way to get it back.
I can't say anything here. You can write to the MT service desk or to the forum for the moderators. Try reinstalling MT.
Dear Taras Every Sunday I copy the Data Folders because I'm always getting new Custom MT4 Indicators. And I always update my templates. I took your Advice & Reinstalled FTMO MT4. Once I did that I was able to get my Market Indicator Back. Taras what I did was use The Data folder from this Sunday & re copy all of my templates & indicator before I had the Market Indicator that was missing problem. I was able to see the Market Folder Indicator again... To my Dismay Again Once I Re Downloaded my purchase RSI Dashboard Multicurrency the Market Indicator dissapeared again of The FTMO MT4 Platform.
As A Result, I decided to Download the purchase RSI Dashboard Multicurrency the Market Indicator on Oanda MT4 Platform. I'm happy I was able to see the purchase indicator. I'm a big fan of your work Taras... But I notice one drawback with the RSI DB MultiCrcy. I was able to adjust the refresh rate to 300 seconds. Which means every 5 minutes all Currencies TimeFrame will Fluctate with a Different Value every 5 Minutes which can be very problematic. For traders like myself who focus on the candle close in order to make a Trading decision.
1)If possible in your next project can you update The RSI DB Multicurrency & Stocastic DB Multicurrency (To change Colors Only On Candle Closes)? That Refresh DB rate every 5,10,15,30 min etc can throw the higher Time Frame off tremondously. Therefore it will be best to give the trader the option to Deactivate DB refresh rate to make the Alert Zone Colors & Numbers to be more static & Less Dynamic by inputting the (Candle Close Feature 1 Candle Back) Across All Currencies Timfame That way the Candles & Numbers of each 4x Currencies Time Frame Of Traders Choice doesn't constantly keep changing every Second or Tick. It only changes when All Currencies Perspective Time Frame Candle Closes 1 candle Back . See Programing Peer CJA DB Thread https://www.forexfactory.com/thread/post/13238955#post13238955 Your Insights will be Highly Appreciated.
Taras, You are correct I only want to see the Each Currencies to close of it's perspective Time Frame. M1-M5,M15 etc. (Close Value Only,Previous candle) I want the 30, 300 seconds refresh rate to be deactivated. Want A One Bar Close throughout each currencies Time Frame. Dont want the Values to Move at all (unless The Currency Time Frame Bar Closes). Example Unless The M15 Bar Closes... H1 Bar Closes... Etc. That way the Values doesn't keep fluctuating every 30 - 300 Seconds.
1) Added the "Refresh cells only on new bar" parameter.
Thank you so much Taras, the indicator works extremely well with new updates features. Gratitude Taras for your feedback & support of adjustment of your Dashboard RSI Indicator.
1) Added parameter: 'Coloring the cells according to' — paint the cells of the table according to the levels of overbought/oversold or according to the direction of the previous candle.
2) Added the ability to run several indicators on one chart.
----------------------------------
1) Добавлен параметр: "Coloring the cells according to the" - расцветка ячеек согласно уровням или предыдущей свече.
2) Добавлена возможность запускать несколько индикаторов на одном графике.
Hi Taras,
I choose alert mode : combined in a row
Check alerts only on bar closing : true
With timeframe : M5 M15 M30 H1
Is the indicator waiting for H1 bar to close to give alert ?
Hi Taras,
I choose alert mode : combined in a row
Check alerts only on bar closing : true
With timeframe : M5 M15 M30 H1
Is the indicator waiting for H1 bar to close to give alert ?
Hello.
Alert "combined in a row" always works once a bar and it does not depend on the closing of the candle.
So if you have a minimum TF = M5, then this alert will trigger no more than once every 5 minutes.
This can occur at any time throughout the current bar.
Hello,
I chose H1 up to w1 for viewing on the RSI table but I would like to have alerts lets say only for M15 and H1 for overbought/oversold (The time when both are overbought or oversold). Can the indicator do that? because when I put "All timeframes are overbought/oversold M15 H1 it didn't give me any signals. Also i have pop up alert true
THANKS!
Hello,
I chose H1 up to w1 for viewing on the RSI table but I would like to have alerts lets say only for M15 and H1 for overbought/oversold (The time when both are overbought or oversold). Can the indicator do that? because when I put "All timeframes are overbought/oversold M15 H1 it didn't give me any signals. Also i have pop up alert true
THANKS!
Hello.
In the strategy tester, alerts come.
I chose these two periods.
Hello.
In the strategy tester, alerts come.
I chose these two periods.
As I can see from the picture you have only M15 and H1 on the RSI table. If you had M15 H1 H4 D1 on the RSI table and asked for alerts for M15 and H1 combined It wouldn't give you alerts. Could you please check this also?
The parameter "All timeframes are Overbought / Oversold" is only for all timeframes at the same time.
Do you only need the "M15 H1"?
So set them in the parameters.
or launch another copy of the indicator on another chart, and in it set M15 H1 and the alerts you need.
OK Thanks
Dear Sir I don't know what's going on. I just purchase your Dashboard RSI Multicurrency today.
I wanted to check to see if the MTF RSI Dashboard alerts RSI (8) to send an alert only when there's a candle close 1 candle back from the open
1)Buy Crosses & Closes above the 50 Level for Buy Signal Alerts
2)Sell Crosses & Closes below the 50 Level for Sell Signal Alerts
Trying to quickly follow Steve Primo short term trends https://www.forexfactory.com/thread/post/13224563#post13224563
01 MTF RSI Multi Pair Dashboard v1 & MTF STOCH Multi Pair Dashboard+1 Indicators from CJA ForexFactory Thread Both have The Candle close features 1 candle back). But doesn't have the value or Alerts feature in any of the indicators. Your Insights will be highly appreciated
***Till my Dismay Sir Once I made the purchase my Market Indicator Folder dissappeared & I have no way to get it back. I can't access the folder at all please help Taras
I wanted to check to see if the MTF RSI Dashboard alerts RSI (8) to send an alert only when there's a candle close 1 candle back from the open
Hello.
For the indicator to send alerts only when the candle is closed, you need to change the "Check alerts only on bar closing" parameter.
But doesn't have the value or Alerts feature in any of the indicators.
Also, the alert is sent once to the bar. If the bar has already been closed before, there will be no alert.
If you restart the indicator (change the parameters, or the period, or the chart symbol), then MT4 resets all variables and you again need to wait for the bar to close.
***Till my Dismay Sir Once I made the purchase my Market Indicator Folder dissappeared & I have no way to get it back.
I can't say anything here. You can write to the MT service desk or to the forum for the moderators.
Try reinstalling MT.
just checked, bar close alerts are working.
Dear Taras Every Sunday I copy the Data Folders because I'm always getting new Custom MT4 Indicators. And I always update my templates. I took your Advice & Reinstalled FTMO MT4. Once I did that I was able to get my
Market Indicator Back. Taras what I did was use The Data folder from this Sunday & re copy all of my templates & indicator before I had the Market Indicator that was missing problem. I was able to see the Market
Folder Indicator again... To my Dismay Again Once I Re Downloaded my purchase RSI Dashboard Multicurrency the Market Indicator dissapeared again of The FTMO MT4 Platform.
As A Result, I decided to Download the purchase RSI Dashboard Multicurrency the Market Indicator on Oanda MT4 Platform. I'm happy I was able to see the purchase indicator. I'm a big fan of your work Taras...
But I notice one drawback with the RSI DB MultiCrcy. I was able to adjust the refresh rate to 300 seconds. Which means every 5 minutes all Currencies TimeFrame will Fluctate with a Different Value every
5 Minutes which can be very problematic. For traders like myself who focus on the candle close in order to make a Trading decision.
1)If possible in your next project can you update The RSI DB Multicurrency & Stocastic DB Multicurrency (To change Colors Only On Candle Closes)? That Refresh DB rate every 5,10,15,30 min etc can throw the higher Time
Frame off tremondously. Therefore it will be best to give the trader the option to Deactivate DB refresh rate to make the Alert Zone Colors & Numbers to be more static & Less Dynamic by inputting the
(Candle Close Feature 1 Candle Back) Across All Currencies Timfame That way the Candles & Numbers of each 4x Currencies Time Frame Of Traders Choice doesn't constantly keep changing every Second or Tick.
It only changes when All Currencies Perspective Time Frame Candle Closes 1 candle Back . See Programing Peer CJA DB Thread https://www.forexfactory.com/thread/post/13238955#post13238955
Your Insights will be Highly Appreciated.
Why did you attach all these files to your message?
Is this some kind of advertisement?
From your big message, I understood that you only want to change the color of the cell when the bar closes, right?
For the rest, I do not see sense.
Thank you so much Taras, the indicator works extremely well with new updates features. Gratitude Taras for your feedback & support of adjustment of your Dashboard RSI Indicator.