Solo gli utenti che hanno acquistato o noleggiato il prodotto possono lasciare commenti
Alexandr Bryzgalov  
shafifie:

Meaning that I must run 4 MT4, as shown below. 

I already tried that, however the order open on Master A  instantly close due to Master B have no order. 

Can you advise the parameter value of StMagik?

I put copier and copier1 on each Slave MT4. 

Thanks. 
If you have 3 master account and one slave account, then yes, you need to run 4 MT4.
1. Run products on all major accounts in the master mode.
2. Alternately run the copy of the product on the slave account (one terminal), in slave mode. For each copy of the product on the slave bill put a different value StMagik (the way it will be the master account number).

If it does not start, please. Record video.

----------------

RU Original: Если у Вас 3 мастер счёта и один ведомый счёт, то да, нужно запустить 4 МТ4.
1. Запустите продукты на всех ведущих счетах в режиме мастер.
2. Поочерёдно запускайте копии продукта на ведомом счёте(в одном терминале), в режиме слейв. Для каждой копии продукта на слейв счёте ставьте разное значение параметра СтМагик(путь это будет номер мастер счёта).

Если не получится запустить, сообщите. Запишу видео.


Alexandr Bryzgalov  
on the slave account to run so

Do not forget the master account number (ServerAccount) for each copy on the slave account




shafifie  
Alexandr Bryzgalov:
on the slave account to run so

Do not forget the master account number (ServerAccount) for each copy on the slave account




Thanks for your patience. 

I think i got it. 

All 2 primary account run in master mode. 

1 secondary account run in slave mode on 2 chart in order to apply each 2 primary account server number. 

Of course with different StMagik parameter like you show me. 

You can see the attachment below. 

Slave account with 2 chart with different server number. 

File:
IMG_3012.PNG  3995 kb
Aleksandr Lysenko  
Александр, почему на пробной версии копировщика он копирует только один ордер одной валютной пары? при открытии второго ордера той же валютной пары, он не копируется
Alexandr Bryzgalov  
Aleksandr Lysenko:
Александр, почему на пробной версии копировщика он копирует только один ордер одной валютной пары? при открытии второго ордера той же валютной пары, он не копируется
Какие записи есть в логе ведомого терминала при открытии второго ордера на мастере?
tariqulalom  

Hye Sir,

My Master accounts symbols like EURUSDmicro, GBPUSDmicro, GOLDmicro, ETC

And Sleeve accounts symbols like EURUSD.ecn, GBPUSD.ecn, XAUUSD.ecn, ETC 

will the account copy .......

I need a extra feature, If lot values are grater than or equal to 10 (Variable value) then stop copy ...

                                 If lot values are less than or equal to 0.02 (Variable value) then stop copy ...


I you able to code this, I will buy your product ...


plz confirm soon

thanks

Tariqul

Alexandr Bryzgalov  
tariqulalom:

Hye Sir,

My Master accounts symbols like EURUSDmicro, GBPUSDmicro, GOLDmicro, ETC

And Sleeve accounts symbols like EURUSD.ecn, GBPUSD.ecn, XAUUSD.ecn, ETC 

will the account copy .......

I need a extra feature, If lot values are grater than or equal to 10 (Variable value) then stop copy ...

                                 If lot values are less than or equal to 0.02 (Variable value) then stop copy ...


I you able to code this, I will buy your product ...


plz confirm soon

thanks

Tariqul

Hello.
Currently, this parameter is not present.
Adding this parameter is not planned.
elizco38  
Can it be used for copy trading binary options on MT4?
Salman Qazi  

I've run it on 2 accoounts, one master and one slave but slave didn't copy any trades from master. Please answer below questions:

 

1) Do you have to run it on just one chart on each account or all charts which master will be opening the trades?

2) Does it copy from demo to real account or vice versa ? Does it have to be same account type for master and slave?  

3) What are the recommended settings for the time?  

4) There are no instructions provided with the product that show how to setup this software in different modes. I see you made some comments after users asked you but still it's not clear enough.

5) If master already has trades open, does the software not copy those trades to slave? 

Alexandr Bryzgalov  
Salman Qazi:

I've run it on 2 accoounts, one master and one slave but slave didn't copy any trades from master. Please answer below questions:

 

1) Do you have to run it on just one chart on each account or all charts which master will be opening the trades?

2) Does it copy from demo to real account or vice versa ? Does it have to be same account type for master and slave?  

3) What are the recommended settings for the time?  

4) There are no instructions provided with the product that show how to setup this software in different modes. I see you made some comments after users asked you but still it's not clear enough.

5) If master already has trades open, does the software not copy those trades to slave? 


Hello.
1. To copy one to one, enough to run on a single chart to the master account and on the same graph on a slave account.
2. It is possible to copy the demo on real and demo reals. Account type does not matter.
3. The recommended time setting is already installed.
4. In the description of the product has a simple description for the run. Setting a minimum, which danyh explanation herein.
5. To copy the already open trades Increase the value of the "allowable time copy sec."=99999999
after orders are copied to reduce the value of the former.
[Eliminato]  
To copy the already open trades Increase the value of the "allowable time copy sec."=99999999
Without that information it is hard to see that this not a bug. the expert advisor should look for all open trades after start.
Alexandr Bryzgalov  
Thorsten Rohweder:
To copy the already open trades Increase the value of the "allowable time copy sec."=99999999
Without that information it is hard to see that this not a bug. the expert advisor should look for all open trades after start.
Hello.
I finalize this moment.
Denis Antipin  

Скажите пожалуйста, если на мастер счёте лот=0.1 и надо его скопировать на Slave = 0.01 то в строке с параметром Coeff должно стоять 0.1 ?

 И хотелось бы узнать по поводу комментариев.  Если копировать с разных графиков одного и того же мастер счёта на другой Slave счёт, то хотелось бы чтоб можно было копировать с разными комментариями  -  это можно делать?

Alexandr Bryzgalov  
Denis Antipin:

Скажите пожалуйста, если на мастер счёте лот=0.1 и надо его скопировать на Slave = 0.01 то в строке с параметром Coeff должно стоять 0.1 ?

 И хотелось бы узнать по поводу комментариев.  Если копировать с разных графиков одного и того же мастер счёта на другой Slave счёт, то хотелось бы чтоб можно было копировать с разными комментариями  -  это можно делать?

Здравствуйте.

1. Да, Coeff нужно ставить 0.1.

2. Ставьте на слейв счёте разное значение StMagik. Но если на слейв счёте отсутствует символы по которому совершаются сделки на мастер счёте, то такие сделки скопированы не будут.

PS: если на мастере торговля идёт допустим по символам EURUSD и EURUSDv, то в принципе можно сделать что бы на слейве копировалось всё на пару EURUSD. На слейве нужно запустить две копии продукта в режиме слей с разными значениями StMagik и настроить суффиксы префиксы. С ошибками в логе но копирование будет происходить.
Abubakar Qazi  

Hi,

Please advise what should be settings for master and slave if one account has symbol for gold as "GOLD" while other account has "XAUUSD"?

Thanks 

Alexandr Bryzgalov  
Abubakar Qazi:

Hi,

Please advise what should be settings for master and slave if one account has symbol for gold as "GOLD" while other account has "XAUUSD"?

Thanks 

Hello.
Copy Gold -> XAUUSD is not provided.
[Eliminato]  
I ran with two master, so i have two slaves on some accounts. The 2nd slave opens the trades from its master, then closes it very fast (in loss).

I did everything like in the description. The wrong closing is on all slave acconts with this master.

It's Version 2.42 (i cannot update yet, there are open positions ?!).
Alexandr Bryzgalov  
Thorsten Rohweder:
I ran with two master, so i have two slaves on some accounts. The 2nd slave opens the trades from its master, then closes it very fast (in loss).

I did everything like in the description. The wrong closing is on all slave acconts with this master.

It's Version 2.42 (i cannot update yet, there are open positions ?!).
Hello.
You want to copy from one master account to two slave account? One-to-many?


If so, then run a second copy of the product on the master account does not need to
[Eliminato]  
Alexandr Bryzgalov:
Hello.
You want to copy from one master account to two slave account? One-to-many?


If so, run the wizard on the second copy is not necessary.
Sorry,i do not understand your answer.

- what 'wizard' are you pointing to ?  it's two masters and a set of slave accounts which two slave instances each. 2:n

- how is  this relatad to the wrong and immediate closing of positions ?
Solo gli utenti che hanno acquistato o noleggiato il prodotto possono lasciare commenti