DEMA Cross
50 USD
Versione demo scaricata:
48
Pubblicato:
4 luglio 2019
Versione attuale:
1.1
Non hai trovato un robot adatto?
Ordina il tuo
su Freelance
Vai alla sezione Freelance
Ordina il tuo
su Freelance
Come acquistare un Robot di Trading o un indicatore
Esegui il tuo EA
hosting virtuale
hosting virtuale
Prova un indicatore/robot di trading prima di acquistarlo
Vuoi guadagnare nel Market?
Come presentare un prodotto per venderlo con successo
Ti stai perdendo delle opportunità di trading:
- App di trading gratuite
- Oltre 8.000 segnali per il copy trading
- Notizie economiche per esplorare i mercati finanziari
Registrazione
Accedi
Accetti la politica del sito e le condizioni d’uso
Se non hai un account, registrati
Пожалуйста, все вопросы по эксперту задавайте не в личных сообщениях, а в этом разделе.
Please ask all questions about the expert not in private messages, but in this section.
GBPUSD H3
Dear Pavel,
"Drawdown Percent" setting 2.7
Why continuous short-range open new orders?
*Can you increase the parameters to avoid this situation?
For example: " add order mini step(point) "
Best Regard,
...Why continuous short-range open new orders?...
I think that in this case there was a broker or terminal error.
The EA can open additional orders in the direction of the opened position with the same lot size. Additional orders are opened
only if the EA receives one more signal to open a position in the same direction after it has opened a position,
and if the drawdown of the open position has exceeded the amount specified in the Drawdown Percent parameter.
That is, two conditions must be fulfilled for the opening of additional order.
I think that in this case there was a broker or terminal error.
The EA can open additional orders in the direction of the opened position with the same lot size. Additional orders are opened
only if the EA receives one more signal to open a position in the same direction after it has opened a position,
and if the drawdown of the open position has exceeded the amount specified in the Drawdown Percent parameter.
That is, two conditions must be fulfilled for the opening of additional order.
Для лучшего понимания открытия дополнительных ордеров приведу конкретный пример:
Balance = $10000;
Lot Percent = 6;
Add Order = 2;
Drawdown Percent = 3.
Открылась позиция, например, buy с размером лота = 0.6.
Если в какой-то момент просадка по этой позиции достигла Drawdown Percent, т. е. не менее 3% от баланса, или не менее $300, и произошло повторное пересечение Fast DEMA с Slow DEMA
в том же направлении, что и при открытии предыдущей позиции, то открывается 1-й дополнительный ордер buy с тем же размером лота и усредняется с уже открытой позицией.
Если просадка и дальше продолжает увеличиваться и достигает удвоенного значения Drawdown Percent, т. е. не менее 6% от баланса, или не менее $600, и произошло повторное пересечение
Fast DEMA с Slow DEMA в том же направлении, что и при открытии предыдущей позиции, то открывается 2-й дополнительный ордер buy с тем же размером лота и усредняется
с уже открытой (ранее усредненной) позицией и т. д. (если Add Order > 2).
Если в дальнейшем просадка увеличится и произойдет повторное пересечение Fast DEMA с Slow DEMA в том же направлении, что и при открытии предыдущей позиции,
то больше дополнительных ордеров не откроется, так как уже выполнено условие количества дополнительных ордеров = 2, т. е. 3-й, 4-й и следующие дополнительные ордера не откроются.
Разумеется, то же самое для sell.
To better understand the opening of additional orders, I will give a specific example:
Balance = $ 10,000;
Lot Percent = 6;
Add Order = 2;
Drawdown Percent = 3.
A position has opened, for example, buy with a lot size = 0.6.
If at some point the drawdown for this position reached Drawdown Percent , i.e. at least 3% of the balance, or at least $ 300, and Fast re-crossed DEMA with Slow Dema
in the same direction as when opening the previous position, the first additional buy order with the same lot size is opened and averaged with the already open position.
If the drawdown continues to increase and reaches twice the Drawdown value Percent , i.e. at least 6% of the balance, or at least $ 600, and there was a re-crossing
Fast DEMA with Slow DEMA in the same direction as when opening the previous position, the 2nd additional buy order is opened with the same lot size and averaged
with an already open (previously averaged) position, etc. (if Add Order > 2).
If in the future the drawdown will increase and there will be a repeated intersection Fast DEMA with Slow DEMA in the same direction as when opening the previous position,
then more additional orders will not open, since the condition of the number of additional orders = 2 has already been fulfilled, i.e., the 3rd, 4th and subsequent additional orders will not open.
Of course, the same is true for sell .
Thank you for your detailed and clear answer...👍👍👍
Can You consider for example the above picture..⬆
Increase the possibility of more optimization..
Can You consider for example the above picture..⬆
Increase the possibility of more optimization..
The MA Method parameter cannot be added, because EA uses the intersection of two DEMA - Double Exponential Moving Average.
It's possible to make a separate Timeframe and Applied Price for each DEMA, but this is illogical and inappropriate.
But if you want it, then I did it especially for you. Catch the version DEMA Cross Mode. Good luck!
The MA Method parameter cannot be added, because EA uses the intersection of two DEMA - Double Exponential Moving Average.
It's possible to make a separate Timeframe and Applied Price for each DEMA, but this is illogical and inappropriate.
But if you want it, then I did it especially for you. Catch the version DEMA Cross Mode. Good luck!
🐱🚀🐱🚀🐱🚀
Very grateful
The MA Method parameter cannot be added, because EA uses the intersection of two DEMA - Double Exponential Moving Average.
It's possible to make a separate Timeframe and Applied Price for each DEMA, but this is illogical and inappropriate.
But if you want it, then I did it especially for you. Catch the version DEMA Cross Mode. Good luck!
Dear Pavel,
Thank you very much for your excellent work,
Final suggestion
Can you kindly add the following 2 filters?
Hope to reduce DD and improve winning percentage...🐱🚀
.1.
.2.
*I will report the latest optimization results to you.
* Using the author's EA, opening a new order in a short distance still has serious problems.
Lead to a lot of DD
It is necessary to check the EA carefully.
Or add the "Add LOT Mini Distance" parameter
The picture below is a normal situation
* Using the author's EA, opening a new order in a short distance still has serious problems.
Lead to a lot of DD
It is necessary to check the EA carefully.
Or add the "Add LOT Mini Distance" parameter
Dear Pavel,
please kindly to check it
Failure to correct the error will result in incorrect test results
Dear Pavel,
please kindly to check it
Failure to correct the error will result in incorrect test results
.
A series of orders has not ended
Another new series of orders is open?
*"Add Order" opens lower...🤢🤢🤢
*"Add Order" opens lower...🤢🤢🤢
The picture above shows
"Add Order" opens the position of the order completely different from the EA setting
Please double check, thank the author again for sharing
...Can you kindly add the following 2 filters?
I believe that adding additional filters to DEMA Cross does not make any sense. No need to make a monster from a logical and understandable EA.
But if you want to use additional filters, then you can use my free indicator Trade Helper (here is the link: https://www.mql5.com/en/market/product/28411).
You can also write a detailed and understandable requirements specification and order the development of EA through freelance.
...It is necessary to check the EA carefully.
Or add the "Add LOT Mini Distance" parameter...
...please kindly to check it
Failure to correct the error will result in incorrect test results...
To avoid errors, use optimized input settings.
I published a free EA. I'm sorry, but I don’t have enough time to thoroughly test this free EA, because I'm very busy at my main job (project manager in the high-tech company),
as well as teaching electronics in college, sports training, etc.
I believe that adding additional filters to DEMA Cross does not make any sense. No need to make a monster from a logical and understandable EA.
But if you want to use additional filters, then you can use my free indicator Trade Helper (here is the link: https://www.mql5.com/en/market/product/28411).
You can also write a detailed and understandable requirements specification and order the development of EA through freelance.
OK...👍👍👍