Modify existing EA to "Geo-Multi Grid-v1.1"

Job finished

Execution time 21 days
Feedback from customer
Ahmed completed my complex EA with great skill, integrity and honesty which was greatly appreciated. He even improved the EA with great suggestions. Great job Ahmed, thank you.
Feedback from employee
Thank you George. I'm happy to work with you.

Specification

Only high experience & honest programmer (with high reviews) to modify existing Multi-Grid Hedging EA. Must have a Grid EA experience. This will lead to ongoing work relationship for other projects. Low and medium experience please do not apply.

Existing EA Strategy for “Geo-Grid-Bam-MACD”

1.     Existing EA strategy: buy or sell a primary grid (first grid) based on signal and indicators. Primary grid waits to reach TP/SL. If another signal is initiated (before primary grid TP) this would be a hedge grid (opposite direction), now you have two grids (primary & hedge grid). The EA waits for either the primary TP/SL or Hedge Combo TP, which ever is reached first. If primary (first grid) reaches TP/SL, then the hedge grid will become the primary grid (first grid) and the cycle continues. This is how the existing EA strategy works.

2.     The new “Geo-Multi Grid-v1.0” strategy is the same but with multiple hedge grids.and some new modifications.

3.     Multi Grid just means two or more grids allowed. “Multi Grid Limit”, (Limit) means when Hedge Grid starts the prior Grid stops new orders. “Multi Grid Plus”, (Plus) means all grids create new orders until TP.

 Modify existing EA "Geo-Grid-Bam-MACD" to “Geo-Multi Grid-v1.0” with following changes.

1.     Under “Hedging Mode” delete all existing (except OFF) and add “Multi Grid Plus” and “Multi Grid Limit”. Same logic as before but each new signal to start new grid, hence multi grid. (Long Grid-Short Grid-LG-LG, etc) until a Combo TP (take profit) is reached or TP1 or TP2 (or SL1 or SL2) is reached on first primary grid (same logic as before).

2.  etc.

Responded

1
Developer 1
Rating
(283)
Projects
354
29%
Arbitration
37
27% / 65%
Overdue
10
3%
Loaded
2
Developer 2
Rating
(390)
Projects
416
30%
Arbitration
74
19% / 72%
Overdue
52
13%
Working
3
Developer 3
Rating
(268)
Projects
603
34%
Arbitration
65
22% / 57%
Overdue
146
24%
Working
Published: 1 article, 22 codes
4
Developer 4
Rating
(75)
Projects
111
50%
Arbitration
26
31% / 50%
Overdue
9
8%
Free
Published: 1 article
5
Developer 5
Rating
(14)
Projects
19
11%
Arbitration
1
0% / 100%
Overdue
5
26%
Free
6
Developer 6
Rating
(31)
Projects
41
20%
Arbitration
9
11% / 89%
Overdue
5
12%
Free
7
Developer 7
Rating
(620)
Projects
723
33%
Arbitration
46
48% / 41%
Overdue
14
2%
Busy
8
Developer 8
Rating
(16)
Projects
35
23%
Arbitration
4
0% / 50%
Overdue
2
6%
Working
9
Developer 9
Rating
(221)
Projects
412
61%
Arbitration
13
38% / 23%
Overdue
163
40%
Free
Published: 50 articles, 1 code
10
Developer 10
Rating
(45)
Projects
91
13%
Arbitration
34
26% / 59%
Overdue
37
41%
Free
11
Developer 11
Rating
(72)
Projects
80
10%
Arbitration
38
8% / 58%
Overdue
6
8%
Free
12
Developer 12
Rating
(568)
Projects
641
41%
Arbitration
25
48% / 36%
Overdue
46
7%
Working
13
Developer 13
Rating
(574)
Projects
945
47%
Arbitration
309
58% / 27%
Overdue
125
13%
Free
14
Developer 14
Rating
(119)
Projects
169
38%
Arbitration
9
78% / 22%
Overdue
15
9%
Free
15
Developer 15
Rating
(8)
Projects
13
85%
Arbitration
1
0% / 100%
Overdue
0
Free
Similar orders
Hey guys, I’ve got an MT4 HFT EA that’s showing strong results on an IC Markets demo account, and I'm looking to move it over to MT5. Does anyone have a solid MT5 version that performs well on IC Markets? Having the source code (MQL5) included would be awesome. Thanks for any leads
Let’s use Chart M3. Stochastic 8,3,3. 85/15 trigger for sell stochastic >85, and the reversal move need to engulf the last bar for 1 point. SL over the engulfed bar. Same trigger for buys… Stochastic <15, engulfed bar by 1 point = entrance. SL under the engulfed bar… more details as soon we start to work on it
Freelance Task — EA Recovery Layer Hello. I have a ready-made MQL5 EA. The signals, SL/TP and lot calculation should essentially not be touched. I need a recovery system added. I am not a programmer — below is how the robot should behave. What stays Entry only from an EA signal. Stop-loss is not a new signal. Trailing is already built into my EA — recovery does not implement its own trailing. If trailing is disabled
Should be as it but no alarms, also we need to add a deep search so he can see all the preves candles and a memory function so its not slowing down the indicator. for higher time frames daily 4h 1h around 365 days and for lower time frames we do up to 20k bars but both flexible so i can change it later. the memory is important so the indicator is not always recalculating everything when a new candle shows especially
Creating a bot using the Parabolic indicator with a simple interface.. I want a bot that uses the Parabolic SAR indicator only, with these orders attached to it. Boot name : HEMIN .FX Magic number : 000000 …………………………………………………. Trade behavior : regular OR inverse OR only long "buy" OR only short "sell" Timeframe : ………… Period: ……… ………………………………………………….. Lot size : ……………… Break even in points : …
Project: Fix & Schedule My Dual Fibo Standard Fibonacci Bot I have an existing MQ4 expert advisor called "Dual Fibo Standard Fibonacci". It needs to process 1,000 clients. Right now it runs blindly with no schedule and takes way too long. I need you to optimize it so it runs like a professional business with a 50-100 batch printed stamp copy progress log. Please reply with your numbers for this simple layout: * Phase
Hi, I need an experienced NinjaTrader 8/NinjaScript developer to finish or rebuild an automated futures strategy, ideally by the end of this week. I already have the complete TradingView Pine Script reference strategy, an existing ~2,000-line NinjaScript implementation, Playback logs, and known historical benchmark trades. MOST IMPORTANT REQUIREMENT: TRADINGVIEW ↔ NINJATRADER PARITY. The Pine Script is the reference
I need a custom MQL5 indicator for MetaTrader 5. The indicator must automatically print entry, stop loss, and take profit zones on the chart using dots. A critical requirement is that these dots must be non-lagging and absolutely non-repainting. Additionally, the indicator needs to identify and display current supply and demand zones. Please provide the mq5 source code and the ex5 file upon completion
PHANTOM PROTOCOL V1 35 - 150 USD
PHANTOM PROTOCOL V1 – MT5 EXPERT ADVISOR SPECIFICATION Develop a professional MetaTrader 5 (MT5) Expert Advisor named “PHANTOM PROTOCOL V1”. PRIMARY MARKET: - XAUUSD (Gold) - Designed primarily for M15 and H1 timeframes. - The EA must work with both 3-digit and 2-digit gold pricing where applicable. TRADING LOGIC: Use pure price-action and market-structure analysis rather than relying on a single indicator. The EA
Wanna Create A Trading Robot That Uses Liquidity Sweep And Smart Money Concept EA That Works On PC. I want A Developer Who Can Program Exactly My Strategy That Will Be Shared on A Video Upon The Selection. it Should Follow My Rules .It has To be able To Read Price Action, followed By Liquidity Sweep Areas And Combine with Smart Money Concept Knowledge. We Will Talk about Parameters later on . The robot should be able

Project information

Budget
150 - 750 USD
Deadline
from 5 to 14 day(s)