Live USA stock Pattern detector - description & pictures

MQL5 Indicators Other

Specification

per attached detailed job description  

source code to be provided, accuracy % to be detected of the indicator along with back testing to check indicator accuracy.


Hi , hope you are well.

i would like to know if the following live pattern scanner can be done. Kindly let me know your price and time & programming language you will use for MetaTrader5 (i am flexible on any other platform you may suggest if you think it will be cheaper or better) 

i just want to detect the following 3 patterns of ALL USA stocks (during the trading of 1 min & 5 min charts) and be alerted about them on spot /LIVE so i can trade them immediately.
Once altered (via visual charts display) about the stock that have the following 3 types pattern, i will be able to decide whether to take the move to buy or not after some confirmations i decide on it judgmentally.

First build (Yesterday USA scanner settings)- stocks parameters scan to detect the patterns from on the next trading day:

Features of the US stocks to be displayed  (which i can change its  parameters from the admin settings) :

1- to have  yesterday volume above 3 million & at  least 10%  (or specific %) higher th an its yesterday’s volume (or specific period)

2-  price of yesterday between $2-$200

3- Price increase or decrease of yesterday +/-5 % (meaning remove stocks that has -2% decrease .. but show if it has -5.2% or -20% or +5.5%)


Second  - detect the pattern visually during the live trading: 
after these criterias are met, i would like to see the following stocks appear during the 1min & 5min chart immediately (LIVE) in another viewing display page :

(type 1) - check type 1/2/3 picture file.pdf
1- see stocks that have 3 red bars at least ,
2- the red bar (no.2) lowest point is lower than the earlier red bar (no.1).. lower lows, lower highs
3- the last red bar (no.2) volume must be at least +70% of first market opening 1min (or 5min) volume bar
4- after the lowest red bar to detect the green bar and view it on the display ONLY if the green bar is staying green for 40th second of the (1min) and 3.5 minutes of the (5min). Meaning before the  bar completion of the 1min/5min being green the chart should appear.

(type 2) — in case the lowest red bar volume is not +70% then the volume shall be detected on the next following green bar meaning  —
1- similar to three red bars shapes in type 1 
2- three red bars to be followed by a green bar that its volume must be at least +70% of first market opening 1min (or 5min) volume bar.

3- After the FIRST green bar with the (+70% vol) it should view on the display ONLY if the SECOND green bar appeared after it and  staying green for 40th second of the (1min) and 3.5 minutes of the (5min). Meaning before the second green bar completion of the 1min/5min the chart should appear.

(type 3 - doji)
1- see stocks that have 3 red bars at least ,
2- the red bar (no.2) lowest point is lower than the earlier red bar (no.2).. lower lowers, lower highs
3- the last red bar (no.2) volume must be at least +90% of first market opening 1min (or 5min) volume bar
4- after the doji bar , is to detect the green bar that its last price higher than the doji 
and view it on the display ONLY if the green bar is staying green for 40th second of the (1min) and 3.5 minutes of the (5min). Meaning before the  bar completion of the 1min/5min being green the chart should appear.

Extras:
a) the 1min & 5min each to be viewed in separate pages 
b) the display box of each ticker symbol that match the signals to show: 
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px 'Helvetica Neue'}

- ticker symbol & live price movement 

- Yesterday volume increase % compared to its average past 20 day volume "excluding yesterday vol"- attached example "20 day vol average" 

-can it detect the stock float from Yahoo Finance and put it in the display?

- show the % of the 3 red bars reduction .. for example first red bar (price fall from $100 to $99), second (price fall from $99 to $95) , third red bar (price fall from 95 to 92).. so it should show (3 red bar fall of 8%) 

- on the display of each ticker , it should have also the 1min & 5min chart box (in all cases)

on the display of each ticker, to show what % is the vol size of first 1min/5min bar (example  73%, 120% ...) compared to the igniting bar (point no.3 in above all 3 types)

 c) all the above is for the buy signals... also the same for the sell (meaning revers the above to for the shorting signal) 

**  i may buy the stock from DAS Traders / TD , not from MT5. MT5 only for viewing signals. 


Second build the admin panel of the indicator settings: 

per the attached picture. 

note that in no. 3 in the picture, standard means that volume will be as per the above standard % volume of each type. but if we entered a % figure, then it should override the above % volume. Example in type 2, the volume must be 70% (this is standard) but if we have written 110%, then it should only show type 2 with 110% volume above the first 1min vol/ 5min vol of the day.

Questions:

1- suggested price & time to complete this project

2- I will be using for MT5 from (https://just2trade.online/) which will have all the USA stock market live... is it enough to feed it by building the scanner ? attached "subscription_market_depth" from the website.

3- will you be able to view the stocks (with the chart) automatically that match the singles during the 1min & 5min chart immediately (LIVE) in another viewing display page in MT5?  

4- What are the risks/challenges/ limitations/ what is not possible in the above requirements ?



Thanks
Ahmed 



Responded

1
Developer 1
Rating
(277)
Projects
334
55%
Arbitration
14
36% / 29%
Overdue
1
0%
Free
2
Developer 2
Rating
(45)
Projects
59
14%
Arbitration
31
26% / 52%
Overdue
35
59%
Free
3
Developer 3
Rating
(249)
Projects
398
38%
Arbitration
82
41% / 20%
Overdue
69
17%
Loaded
Similar orders
the idea of the bot is to trade based on trend. we are going to use 5 different sma( smoothed moving average). they are sma7,sma20, sma50, sma100 and sma200. the bot will look for only buy trades when all the smas are facing up. the bot will look for only sell trades when all the smas are facing down. when we are in a up trend, the bot will look to enter trades on bullish candles that create fvg. if there is an fvg
Hello there, all i need is to make an RSI indicator to give alerts when it reaches a certain levels, Level 99.9,98, 4 and 0.1. Kindly bid to this post now if this what you can complete
I need Spike DETECTOR EA for Boom and Crash.. which will send me notification or alerts when spike is near. The EA should also be able be buy on crash Index and sell on Boom Index depending on the market..Demo may be provided for faster execution of my order
Hello , I want Machine Learning: Lorentzian Classification (TradingView) indicator to MQL5 indicator.Which is machine learning indicator . Same To Same. And same inputs in it. I want it As soon As possible
ODSMART EA 30 USD
I want an EA developed from this strategy that will buy and sell based on the appearance of these colours. Blue-buy (Enter when the signal indicator is at zero on the blue background) Red -sell( Enter when the signal indicator is at 100) White and brown, exit trade
Crpyto Indicators 75 - 100 USD
2 Indicators: One for BTC/USD and one for ETH/USD Create indicators which plot the MVRV of Bitcoin and Ethereum as a line, standardized by a Z Score Essentially Zscore = ( MC - MCRealized ) / STD ( MC(number of bars ) Indicators should work on the daily timeframe at a minimum, and smaller ones if possible. Indicators should be able to work with future data as well, meaning it can download what's necessary to then
Hi there Here is a video of the logic: its based on market structure and swings using validated highs and lows based on candle closure. Just in case you would like to take a look at the code/indicator here is the link: https://youtu.be/igj0OaQoM7o?si=7nigL8OU2Nt1Zxkx Let me know if you can help
I am looking for a professional developer to help me with creating a hedge grid bot. The concept is in the picture. The bot is quite simple. The bot basically opens buy and sell positions on each grid and self terminates when the upper limit (manually set is reached) 1. Set timer for new's releases (manual entry) 2. Slippage in pip's (manual entry) 3. Maximum drawdown in USD with self termination when entry
I need alerts for 2 kinds of triangles (contracting & expanding) and 2 kinds of channels (up & dn) before that you should be able to put trendlines to any buffered (usually 0 & 1) zigzag indicators the method of drawing trendline is different i can show them with the pictures
Nt8 30+ USD
I trade in NT8 and would like to code an Elliott wave measurment tool, which is very easy because I have the major Script for that.We need only to add some aspects into it. If you are interested,if you can do this do well to bid on it

Project information

Budget
50 - 80 USD
For the developer
45 - 72 USD