var58: Hello. Please advise how to prescribe in the code of MQL4 EA the rule of opening an order: there should be an order with a certain magic number in the market; if there is no such order, the EA does not open anything according to its main algorithm.
//Конечная точка ObjectCreate("#"+Ticket+" "+type+" "+DoubleToString(lots,2)+" "+symbol+" at "+DoubleToString(b,Digits)+" close at "+DoubleToString(d,Digits),OBJ_ARROW,0,c,d); ObjectSet("#"+Ticket+" "+type+" "+DoubleToString(lots,2)+" "+symbol+" at "+DoubleToString(b,Digits)+" close at "+DoubleToString(d,Digits),OBJPROP_COLOR,col); ObjectSet("#"+Ticket+" "+type+" "+DoubleToString(lots,2)+" "+symbol+" at "+DoubleToString(b,Digits)+" close at "+DoubleToString(d,Digits),OBJPROP_ARROWCODE,3);
Single trades the indicator draws correctly (line>background>profit), but in the display of closed order sets there is a small "bug" (screenshot attached), lines are superimposed on the background and profit (line(1)>background>profit>line(2)>line(3)>line(4) . . . . ).
It should be as follows: (line(1)>line(2)>line(3)>line(4) . . . >fon>profit). Various tampering has not been successful, please help me to fix it.
//------- Вернёт количество int IsCount(int type, int mg) { int p=0; for(int i=0; i<OrdersTotal(); i++) { if(OrderSelect(i, SELECT_BY_POS, MODE_TRADES)) { if(OrderSymbol()==Symbol() && OrderMagicNumber()==mg) { if(OrderType()==type) { p++; }}}} return(p); }
ORDER_TYPE_BUY_STOP is highlighted in MQL4 Editor, not in MQL4 Help. Question: Does it work in MQL4, does it correspond to OP_BUYSTOP type ? I just don't have time to check it yet.
Artyom Trishkin: ORDER_TYPE_BUY_STOP is highlighted in MQL4 Editor, but not in MQL4 Help. Question: does it work in MQL4, it corresponds to OP_BUYSTOP type ? I just don't have time to check it yet.
Yes, it works 100%, it's the only way I'm writing now. Now a lot of things have migrated from Five to Four.
Even this one works, though the compiler used to swear it was a trend line
Allow the use of cookies to log in to the MQL5.com website.
Please enable the necessary setting in your browser, otherwise you will not be able to log in.
You are signed in. Two-factor authentication has been disabled. Set it up again and scan a new QR code, or continue with two-factor authentication disabled.
Hello. Please advise how to prescribe in the code of MQL4 EA the rule of opening an order: there should be an order with a certain magic number in the market; if there is no such order, the EA does not open anything according to its main algorithm.
That's about as far as it goes:
{
Comment( IsCount(ORDER_TYPE_BUY_STOP, 5) ); // type - тип, mg - magic
}
//------- Вернёт количество
int IsCount(int type, int mg) {
int p=0;
for(int i=0; i<OrdersTotal(); i++) {
if(OrderSelect(i, SELECT_BY_POS, MODE_TRADES)) {
if(OrderSymbol()==Symbol() && OrderMagicNumber()==mg) {
if(OrderType()==type) {
p++;
}}}}
return(p);
}
How do I make it possible for a user to fill an array?
How do I make it possible for a user to populate an array?
Greetings, there is an indicator that draws the order history on the chart, code:
//| history.mq4 |
//| Copyright 2017, MetaQuotes Software Corp. |
//| https://www.mql5.com |
//+------------------------------------------------------------------+
#property copyright "Copyright 2017, MetaQuotes Software Corp."
#property link "https://www.mql5.com"
#property version "1.00"
#property strict
#property indicator_chart_window
extern int MagicNumber = 1110;
extern datetime HistoryOrdersFromDateTime = 0;
extern color SellColor = clrRed;
extern color BuyColor = clrBlue;
extern color ProfitColor = clrWhite;
extern bool DeleteHistoryOrders = false;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int OnInit()
{
//--- indicator buffers mapping
//---
return(INIT_SUCCEEDED);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
void start()
{
for(int i=OrdersHistoryTotal()-1; i>=0; i--)
{
if(OrderSelect(i,SELECT_BY_POS,MODE_HISTORY) && OrderMagicNumber()==MagicNumber && OrderSymbol()==Symbol() && OrderType()<=1)
{
if(HistoryOrdersFromDateTime<OrderCloseTime())
{
if((TimeCurrent()-OrderCloseTime())>60)
HistoryOrders();
}
}
}
}
void HistoryOrders()
{
int CountOrders=0;
double b=OrderOpenPrice(), d=OrderClosePrice(), lots=OrderLots(), Profit=0;
datetime a=OrderOpenTime(), c=OrderCloseTime(), close_time;
string Ticket=(string)OrderTicket(), type="Sell", symbol=OrderSymbol(), comment=OrderComment(), Background;
color col=SellColor;
if(OrderType()==0) {col=BuyColor; type="Buy";}
//Расчет профита
for(int i=OrdersHistoryTotal()-1; i>=0; i--)
{
if(OrderSelect(i,SELECT_BY_POS,MODE_HISTORY) && OrderMagicNumber()==MagicNumber && OrderSymbol()==Symbol() && OrderType()<=1)
{
close_time=OrderCloseTime();
if(c<=close_time+60 && c>=close_time-60)
{
Profit+=OrderProfit()+OrderCommission()+OrderSwap();
Ticket=(string)OrderTicket();
}
}
}
//Размер фона
for(int i=2; i<StringLen(DoubleToString(Profit,2)); i++)
StringAdd(Background,"g");
if(DeleteHistoryOrders==false)
{
//Начальная точка
ObjectCreate("#"+Ticket+" "+type+" "+DoubleToString(lots,2)+" "+symbol+" at "+DoubleToString(b,Digits)+"\n"+comment,OBJ_ARROW,0,a,b);
ObjectSet("#"+Ticket+" "+type+" "+DoubleToString(lots,2)+" "+symbol+" at "+DoubleToString(b,Digits)+"\n"+comment,OBJPROP_COLOR,col);
ObjectSet("#"+Ticket+" "+type+" "+DoubleToString(lots,2)+" "+symbol+" at "+DoubleToString(b,Digits)+"\n"+comment,OBJPROP_ARROWCODE,1);
//Линия
ObjectCreate("#"+Ticket+" "+DoubleToString(b,Digits)+" -> "+DoubleToString(d,Digits),OBJ_TREND,0,a,b,c,d);
ObjectSet("#"+Ticket+" "+DoubleToString(b,Digits)+" -> "+DoubleToString(d,Digits),OBJPROP_COLOR,col);
ObjectSet("#"+Ticket+" "+DoubleToString(b,Digits)+" -> "+DoubleToString(d,Digits),OBJPROP_WIDTH,1);
ObjectSet("#"+Ticket+" "+DoubleToString(b,Digits)+" -> "+DoubleToString(d,Digits),OBJPROP_STYLE,STYLE_DOT);
ObjectSet("#"+Ticket+" "+DoubleToString(b,Digits)+" -> "+DoubleToString(d,Digits),OBJPROP_RAY,0);
//Конечная точка
ObjectCreate("#"+Ticket+" "+type+" "+DoubleToString(lots,2)+" "+symbol+" at "+DoubleToString(b,Digits)+" close at "+DoubleToString(d,Digits),OBJ_ARROW,0,c,d);
ObjectSet("#"+Ticket+" "+type+" "+DoubleToString(lots,2)+" "+symbol+" at "+DoubleToString(b,Digits)+" close at "+DoubleToString(d,Digits),OBJPROP_COLOR,col);
ObjectSet("#"+Ticket+" "+type+" "+DoubleToString(lots,2)+" "+symbol+" at "+DoubleToString(b,Digits)+" close at "+DoubleToString(d,Digits),OBJPROP_ARROWCODE,3);
//Фон профита
ObjectCreate("#"+Ticket+" Background",OBJ_TEXT,0,c,d);
ObjectSet("#"+Ticket+" Background",OBJPROP_ANCHOR,ANCHOR_LOWER);
ObjectSetText("#"+Ticket+" Background",Background,10,"Webdings",col);
ObjectSet("#"+Ticket+" Background",OBJPROP_PRICE1,d);
ObjectSet("#"+Ticket+" Background",OBJPROP_TIME1,c+Period());
//Профит
ObjectCreate("#"+Ticket+" Profit: "+DoubleToString(Profit,2),OBJ_TEXT,0,c,d);
ObjectSet("#"+Ticket+" Profit: "+DoubleToString(Profit,2),OBJPROP_ANCHOR,ANCHOR_LOWER);
ObjectSetText("#"+Ticket+" Profit: "+DoubleToString(Profit,2),DoubleToString(Profit,2),10,"Arial",ProfitColor);
ObjectSet("#"+Ticket+" Profit: "+DoubleToString(Profit,2),OBJPROP_PRICE1,d);
ObjectSet("#"+Ticket+" Profit: "+DoubleToString(Profit,2),OBJPROP_TIME1,c+Period());
} else ObjectsDeleteAll(0, "#"+Ticket+" ");
}
void OnDeinit(const int reason)
{
for(int i=0; i<OrdersHistoryTotal(); i++)
{
DeleteHistoryOrders=true;
if(OrderSelect(i,SELECT_BY_POS,MODE_HISTORY) && OrderMagicNumber()==MagicNumber && OrderSymbol()==Symbol())
HistoryOrders();
}
}
Single trades the indicator draws correctly (line>background>profit), but in the display of closed order sets there is a small "bug" (screenshot attached), lines are superimposed on the background and profit (line(1)>background>profit>line(2)>line(3)>line(4) . . . . ).
It should be as follows: (line(1)>line(2)>line(3)>line(4) . . . >fon>profit). Various tampering has not been successful, please help me to fix it.
Who else can fill it in except the user?
I mean how to fill it in via settings. Let's say through a string, and then put its value into an array...
I mean how to fill it in via settings. Let's say through a string, and then put its value into an array...
That's about as far as it goes:
{
Comment( IsCount(ORDER_TYPE_BUY_STOP, 5) ); // type - тип, mg - magic
}
//------- Вернёт количество
int IsCount(int type, int mg) {
int p=0;
for(int i=0; i<OrdersTotal(); i++) {
if(OrderSelect(i, SELECT_BY_POS, MODE_TRADES)) {
if(OrderSymbol()==Symbol() && OrderMagicNumber()==mg) {
if(OrderType()==type) {
p++;
}}}}
return(p);
}
That's about as far as it goes:
void OnTick()
{
Comment( IsCount(ORDER_TYPE_BUY_STOP, 5) ); // type - тип, mg - magic
}
//------- Вернёт количество
int IsCount(int type, int mg) {
int p=0;
for(int i=0; i<OrdersTotal(); i++) {
if(OrderSelect(i, SELECT_BY_POS, MODE_TRADES)) {
if(OrderSymbol()==Symbol() && OrderMagicNumber()==mg) {
if(OrderType()==type) {
p++;
}}}}
return(p);
}
Примерно так можно:
{
Comment( IsCount(ORDER_TYPE_BUY_STOP, 5) ); // type - тип, mg - magic
}
//------- Вернёт количество
int IsCount(int type, int mg) {
int p=0;
for(int i=0; i<OrdersTotal(); i++) {
if(OrderSelect(i, SELECT_BY_POS, MODE_TRADES)) {
if(OrderSymbol()==Symbol() && OrderMagicNumber()==mg) {
if(OrderType()==type) {
p++;
}}}}
return(p);
}
Спасибо большое, попробую.
It's kind of like this.
Thank you!
ORDER_TYPE_BUY_STOP is highlighted in MQL4 Editor, but not in MQL4 Help. Question: does it work in MQL4, it corresponds to OP_BUYSTOP type ? I just don't have time to check it yet.
Yes, it works 100%, it's the only way I'm writing now. Now a lot of things have migrated from Five to Four.
Even this one works, though the compiler used to swear it was a trend line
ObjectSetDouble(chart_ID,nm,OBJPROP_PRICE,p1);
ObjectSetInteger(chart_ID,nm,OBJPROP_TIME,1,t2);
ObjectSetDouble(chart_ID,nm,OBJPROP_PRICE,1,p2);