The function returns either the bar number or price level based on the fractal type, using iHigh or iLow functions.

Rustamzhan Salidzhanov 2008.04.06 13:41 #101

KimIV:
Every man has the right to the left... hee... I'm going to have a bit of fun with this

Ilnar, in the topic Pending Fractal Orders, asked, How to make pending orders on fractals?

I guess Ilnar had some difficulties with fractal price levels. That's why I suggest using my function:

//+----------------------------------------------------------------------------+
//| Автор    : Ким Игорь В. aka KimIV,  http://www.kimiv.ru                    |
//+----------------------------------------------------------------------------+
//| Версия   : 07.10.2006                                                      |
//| Описание : Поиск ближайшего фрактала.                                      |
//+----------------------------------------------------------------------------+
//| Параметры:                                                                 |
//|   sy - наименование инструмента     (NULL - текущий символ)                |
//|   tf - таймфрейм                    (  0  - текущий ТФ)                    |
//|   mode - тип фрактала               (MODE_LOWER|MODE_UPPER)                |
//+----------------------------------------------------------------------------+
double FindNearFractal(string sy="0", int tf=0, int mode=MODE_LOWER) {
  if (sy=="" || sy=="0") sy=Symbol();
  double f=0;
  int d=MarketInfo(sy, MODE_DIGITS), s;
  if (d==0) if (StringFind(sy, "JPY")<0) d=4; else d=2;
 
  for (s=2; s<100; s++) {
    f=iFractals(sy, tf, mode, s);
    if (f!=0) return(NormalizeDouble(f, d));
  }
  Print("FindNearFractal(): Фрактал не найден");
  return(0);
}

Function FindNearFractal() searches for the nearest fractal of the specified type at the specified symbol, at the given timeframe, and returns its price level. Knowing the price level of the location of the fractal, it is already easy to place an order at that level.

Is it possible for the function to return two values, e.g., the number of the bar where the fractal is located, or should we connect another one?

Igor Kim 2008.04.06 17:45 #102

xrust писал (а):
Is it possible for the function to return two values, e.g. also the bar number where the fractal is located, or should I connect another one?

And why return two values when one - the bar number - is enough? For this purpose, in the statement:

return(NormalizeDouble(f, d));

write the value of the bar counter s instead of the price level. On the output you will get the bar number of the fractal. And you will get the price level with one of iHigh () or iLow() functions depending on the fractal type.

Ihighest & Lowest return DateTime Comparison Plotting lines in an

Rustamzhan Salidzhanov 2008.04.06 18:05 #103

No, it's all clear here, I'm basically asking. Thank you, your posts are very helpful.

Igor Kim 2008.04.06 18:36 #104

xrust:
No, it's clear, I'm basically asking.

ah... Well, if in principle, you can use an array passed by reference. Then the number of returned parameters would be limited by the size of the array.

Igor Kim 2008.04.07 16:41 #105

Function ExistOrdersByLot().

Returns a flag for the existence of an order with the specified lot size. True - order exists (set), False - order doesn't exist (not set). You can limit the list of orders to be checked using the function parameters:

sy - Name of instrument. If you set this parameter, the function will only check the orders of the specified instrument. NULL means current instrument, and "" (by default) means any instrument.
op - Operation, type of pending order. Valid values: OP_BUYLIMIT, OP_BUYSTOP, OP_SELLLIMIT, OP_SELLSTOP or -1. The default value of -1 indicates any order type.
mn - Order identifier (MagicNumber). The default value of -1 means any MagicNumber.
lo - Size of a lot with an accuracy of two decimal places. The default value is 0 - any lot size.

//+----------------------------------------------------------------------------+
//|  Автор    : Ким Игорь В. aka KimIV,  http://www.kimiv.ru                   |
//+----------------------------------------------------------------------------+
//|  Версия   : 28.11.2006                                                     |
//|  Описание : Возвращает флаг существования ордера по размеру лота.          |
//+----------------------------------------------------------------------------+
//|  Параметры:                                                                |
//|    sy - наименование инструмента   (""   - любой символ,                   |
//|                                     NULL - текущий символ)                 |
//|    op - операция                   (-1   - любой ордер)                    |
//|    mn - MagicNumber                (-1   - любой магик)                    |
//|    lo - лот                        ( 0   - любой лот)                      |
//+----------------------------------------------------------------------------+
bool ExistOrdersByLot(string sy="", int op=-1, int mn=-1, double lo=0) {
  int i, k=OrdersTotal(), ot;
  lo=NormalizeDouble(lo, 2);

  if (sy=="0") sy=Symbol();
  for (i=0; i<k; i++) {
    if (OrderSelect(i, SELECT_BY_POS, MODE_TRADES)) {
      ot=OrderType();
      if (ot>1 && ot<6) {
        if ((OrderSymbol()==sy || sy=="") && (op<0 || ot==op)) {
          if (mn<0 || OrderMagicNumber()==mn) {
            if (lo<=0 || NormalizeDouble(OrderLots(), 2)==lo) return(True);
          }
        }
      }
    }
  }
  return(False);
}

Only "Useful features from [WARNING CLOSED!] Any newbie Any questions from newcomers

Igor Kim 2008.04.07 16:44 #106

Examples of how to use the ExistOrdersByLot() function.

Check for any order with lot size 0.2
```
ExistOrdersByLot("", -1, -1, 0.2);
```
Check any order with lot size 0.3 on the current chart symbol
```
ExistOrdersByLot(NULL, -1, -1, 0.3);
```
Check if there is a BuyLimit order with the lot size 0.5 for any symbol
```
ExistOrdersByLot("", OP_BUYLIMIT, -1, 0.5);
```
Check presence of SellStop order with the lot size 0.1 and the magic number 123456 by EURUSD
```
ExistOrdersByLot("EURUSD", OP_SELLSTOP, 123456, 0.1);
```
Check presence of any order with lot 0.4 with magic number 987 on USDJPY
```
ExistOrdersByLot("USDJPY", -1, 987, 0.4);
```

Attached, as usual, is a working script with the above examples.

Files:

test_existordersbylot.mq4 5 kb

Igor Kim 2008.04.08 08:19 #107

GetLotLastOrder() function.

Returns the lot size of the last placed order or -1. You can limit the list of orders to be checked using the function parameters:

sy - Name of the instrument. If this parameter is given, the function will only check the orders of the specified instrument. NULL means the current instrument, and "" (by default) means any instrument.
op - Operation, type of pending order. Valid values: OP_BUYLIMIT, OP_BUYSTOP, OP_SELLLIMIT, OP_SELLSTOP or -1. The default value of -1 means any order.
mn - Order identifier (MagicNumber). Default value -1 means any MagicNumber.

//+----------------------------------------------------------------------------+
//|  Автор    : Ким Игорь В. aka KimIV,  http://www.kimiv.ru                   |
//+----------------------------------------------------------------------------+
//|  Версия   : 28.11.2006                                                     |
//|  Описание : Возвращает размер лота последнего выставленного ордера или -1  |
//+----------------------------------------------------------------------------+
//|  Параметры:                                                                |
//|    sy - наименование инструмента   (""   - любой символ,                   |
//|                                     NULL - текущий символ)                 |
//|    op - операция                   (-1   - любая позиция)                  |
//|    mn - MagicNumber                (-1   - любой магик)                    |
//+----------------------------------------------------------------------------+
double GetLotLastOrder(string sy="", int op=-1, int mn=-1) {
  datetime o;
  double   l=-1;
  int      i, k=OrdersTotal();

  if (sy=="0") sy=Symbol();
  for (i=0; i<k; i++) {
    if (OrderSelect(i, SELECT_BY_POS, MODE_TRADES)) {
      if (OrderSymbol()==sy || sy=="") {
        if (OrderType()>1 && OrderType()<6) {
          if (op<0 || OrderType()==op) {
            if (mn<0 || OrderMagicNumber()==mn) {
              if (o<OrderOpenTime()) {
                o=OrderOpenTime();
                l=OrderLots();
              }
            }
          }
        }
      }
    }
  }
  return(l);
}

Only "Useful features from [WARNING CLOSED!] Any newbie And let's make a

Igor Kim 2008.04.08 08:22 #108

Examples of how to use GetLotLastOrder().

Find lot size of the last order placed
```
GetLotLastOrder();
```
Find the lot size of the last order placed at the current symbol
```
GetLotLastOrder(NULL);
```
Find the lot size of the last BuyLimit order at any symbol
```
GetLotLastOrder("", OP_BUYLIMIT);
```
Find the lot size of the last SellStop order with the magic number 123456 on EURUSD
```
GetLotLastOrder("EURUSD", OP_SELLSTOP, 123456);
```
Specify the lot size of the last order with magic number 2345 for the current symbol
```
GetLotLastOrder(NULL, -1, 2345);
```

Attached here is a traditionally working script with the above examples.

Files:

test_getlotlastorder.mq4 4 kb

Igor Kim 2008.04.08 10:21 #109

GetOrderOpenPrice() function.

Returns the setting price of the last opened order or 0. You can limit the list of orders to be checked with function parameters:

sy - Name of the instrument. If this parameter is given, the function will only check the orders of the specified instrument. NULL means the current instrument, and "" (by default) means any instrument.
op - Operation, type of pending order. Valid values: OP_BUYLIMIT, OP_BUYSTOP, OP_SELLLIMIT, OP_SELLSTOP or -1. The default value of -1 means any order.
mn - Order identifier (MagicNumber). Default value -1 means any MagicNumber.

//+----------------------------------------------------------------------------+
//|  Автор    : Ким Игорь В. aka KimIV,  http://www.kimiv.ru                   |
//+----------------------------------------------------------------------------+
//|  Версия   : 28.11.2006                                                     |
//|  Описание : Возвращает цену установки последнего ордера или 0.             |
//+----------------------------------------------------------------------------+
//|  Параметры:                                                                |
//|    sy - наименование инструмента   (""   - любой символ,                   |
//|                                     NULL - текущий символ)                 |
//|    op - операция                   (-1   - любая позиция)                  |
//|    mn - MagicNumber                (-1   - любой магик)                    |
//+----------------------------------------------------------------------------+
double GetOrderOpenPrice(string sy="", int op=-1, int mn=-1) {
  datetime t;
  double   r=0;
  int      i, k=OrdersTotal();

  if (sy=="0") sy=Symbol();
  for (i=0; i<k; i++) {
    if (OrderSelect(i, SELECT_BY_POS, MODE_TRADES)) {
      if (OrderSymbol()==sy || sy=="") {
        if (OrderType()>1 && OrderType()<6) {
          if (op<0 || OrderType()==op) {
            if (mn<0 || OrderMagicNumber()==mn) {
              if (t<OrderOpenTime()) {
                t=OrderOpenTime();
                r=OrderOpenPrice();
              }
            }
          }
        }
      }
    }
  }
  return(r);
}

Only "Useful features from [WARNING CLOSED!] Any newbie And let's make a

Igor Kim 2008.04.08 10:24 #110

Examples of how to use GetOrderOpenPrice().

Get the opening price of the last order placed
```
GetOrderOpenPrice();
```
Find the price of the last order placed at the current symbol
```
GetOrderOpenPrice(NULL);
```
Find the setting price of the last BuyLimit order at any symbol
```
GetOrderOpenPrice("", OP_BUYLIMIT);
```
Find the price of the last SellStop order placed with magic 123456 on EURUSD
```
GetOrderOpenPrice("EURUSD", OP_SELLSTOP, 123456);
```
Specify the price of the last order placed with magic 2345 for the current symbol
```
GetOrderOpenPrice(NULL, -1, 2345);
```

Attached is a perfectly working script with the above examples.

Files:

test_getorderopenprice.mq4 4 kb

Useful features from KimIV - page 11

Function ExistOrdersByLot().

Examples of how to use the ExistOrdersByLot() function.

GetLotLastOrder() function.

Examples of how to use GetLotLastOrder().

GetOrderOpenPrice() function.

Examples of how to use GetOrderOpenPrice().