Need Help coding a EA using RSI
it can be done. This is a technical signal that spots a reversion/end of a trend. Although you can you can visualize them at the charts, it is a bit challenging programming their detection. It involves the matching of several distinct price patterns:
- a down trend that is making lower lows (or the reverse)
- a RSI that is not making lower lows (it can be rising or located just above a previous low)
- an implicite divergence between price and RSI.
This is a signal that can complement a trend following strategy. But as we might be opening orders against the trend, we could use buystops/sellstops with entry price being continuously adjusted to the corresponding price action. I think Gorez (see the championship) does this on some of his orders.
As I am interested to test it, I'll try (and I mean try) to develop it. Wait some time, or until other guy gives it to you.
Bye..
Thanks, I am developing this strategy on Trade Navigator using 1 and 5 min. I have used the stop in from the previous bars low or high +/- 1 tick. I am not familar with mql4. Having some positive results with strategy. Still need to filter some entry and exits. Thanks for the help
I guess that you are getting many false signals. It's a typical issue of more complex patterns detection.
How do I create a stop in entry, instead of a market order?
Here is the EA I am working on using an EA Builder, Also, would like to move stop to Break even after +15 ticks
//+------------------------------------------------------------------+
//| This MQL is generated by Expert Advisor Builder |
//| http://sufx.core.t3-ism.net/ExpertAdvisorBuilder/ |
//| |
//| In no event will author be liable for any damages whatsoever. |
//| Use at your own risk. |
//| |
//+------------------- DO NOT REMOVE THIS HEADER --------------------+
#define SIGNAL_NONE 0
#define SIGNAL_BUY 1
#define SIGNAL_SELL 2
#define SIGNAL_CLOSEBUY 3
#define SIGNAL_CLOSESELL 4
#property copyright "Expert Advisor Builder"
#property link "http://sufx.core.t3-ism.net/ExpertAdvisorBuilder/"
extern int MagicNumber = 0;
extern bool SignalMail = False;
extern bool EachTickMode = false;
extern double Lots = 2.0;
extern int Slippage = 3;
extern bool UseStopLoss = True;
extern int StopLoss = 18;
extern bool UseTakeProfit = false;
extern int TakeProfit = 30;
extern bool UseTrailingStop = True;
extern int TrailingStop = 30;
int BarCount;
int Current;
bool TickCheck = False;
//+------------------------------------------------------------------+
//| expert initialization function |
//+------------------------------------------------------------------+
int init() {
BarCount = Bars;
if (EachTickMode) Current = 0; else Current = 1;
return(0);
}
//+------------------------------------------------------------------+
//| expert deinitialization function |
//+------------------------------------------------------------------+
int deinit() {
return(0);
}
//+------------------------------------------------------------------+
//| expert start function |
//+------------------------------------------------------------------+
int start() {
int Order = SIGNAL_NONE;
int Total, Ticket;
double StopLossLevel, TakeProfitLevel;
if (EachTickMode && Bars != BarCount) TickCheck = False;
Total = OrdersTotal();
Order = SIGNAL_NONE;
//+------------------------------------------------------------------+
//| Variable Begin |
//+------------------------------------------------------------------+
double Buy1_1 = iRSI(NULL, 0, 14, PRICE_CLOSE, Current + 0);
double Buy1_2 = 25;
double Sell1_1 = iRSI(NULL, 0, 14, PRICE_MEDIAN, Current + 0);
double Sell1_2 = 75;
//+------------------------------------------------------------------+
//| Variable End |
//+------------------------------------------------------------------+
//Check position
bool IsTrade = False;
for (int i = 0; i < Total; i ++) {
OrderSelect(i, SELECT_BY_POS, MODE_TRADES);
if(OrderType() <= OP_SELL && OrderSymbol() == Symbol()) {
IsTrade = True;
if(OrderType() == OP_BUY) {
//Close
//+------------------------------------------------------------------+
//| Signal Begin(Exit Buy) |
//+------------------------------------------------------------------+
//+------------------------------------------------------------------+
//| Signal End(Exit Buy) |
//+------------------------------------------------------------------+
if (Order == SIGNAL_CLOSEBUY && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
OrderClose(OrderTicket(), OrderLots(), Bid, Slippage, MediumSeaGreen);
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Bid, Digits) + " Close Buy");
if (!EachTickMode) BarCount = Bars;
IsTrade = False;
continue;
}
//Trailing stop
if(UseTrailingStop && TrailingStop > 0) {
if(Bid - OrderOpenPrice() > Point * TrailingStop) {
if(OrderStopLoss() < Bid - Point * TrailingStop) {
OrderModify(OrderTicket(), OrderOpenPrice(), Bid - Point * TrailingStop, OrderTakeProfit(), 0, MediumSeaGreen);
if (!EachTickMode) BarCount = Bars;
continue;
}
}
}
} else {
//Close
//+------------------------------------------------------------------+
//| Signal Begin(Exit Sell) |
//+------------------------------------------------------------------+
//+------------------------------------------------------------------+
//| Signal End(Exit Sell) |
//+------------------------------------------------------------------+
if (Order == SIGNAL_CLOSESELL && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
OrderClose(OrderTicket(), OrderLots(), Ask, Slippage, DarkOrange);
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Ask, Digits) + " Close Sell");
if (!EachTickMode) BarCount = Bars;
IsTrade = False;
continue;
}
//Trailing stop
if(UseTrailingStop && TrailingStop > 0) {
if((OrderOpenPrice() - Ask) > (Point * TrailingStop)) {
if((OrderStopLoss() > (Ask + Point * TrailingStop)) || (OrderStopLoss() == 0)) {
OrderModify(OrderTicket(), OrderOpenPrice(), Ask + Point * TrailingStop, OrderTakeProfit(), 0, DarkOrange);
if (!EachTickMode) BarCount = Bars;
continue;
}
}
}
}
}
}
//+------------------------------------------------------------------+
//| Signal Begin(Entry) |
//+------------------------------------------------------------------+
if (Buy1_1 < Buy1_2) Order = SIGNAL_BUY;
if (Sell1_1 > Sell1_2) Order = SIGNAL_SELL;
//+------------------------------------------------------------------+
//| Signal End |
//+------------------------------------------------------------------+
//Buy
if (Order == SIGNAL_BUY && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
if(!IsTrade) {
//Check free margin
if (AccountFreeMargin() < (1000 * Lots)) {
Print("We have no money. Free Margin = ", AccountFreeMargin());
return(0);
}
if (UseStopLoss) StopLossLevel = Ask - StopLoss * Point; else StopLossLevel = 0.0;
if (UseTakeProfit) TakeProfitLevel = Ask + TakeProfit * Point; else TakeProfitLevel = 0.0;
Ticket = OrderSend(Symbol(), OP_BUY, Lots, Ask, Slippage, StopLossLevel, TakeProfitLevel, "Buy(#" + MagicNumber + ")", MagicNumber, 0, DodgerBlue);
if(Ticket > 0) {
if (OrderSelect(Ticket, SELECT_BY_TICKET, MODE_TRADES)) {
Print("BUY order opened : ", OrderOpenPrice());
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Ask, Digits) + " Open Buy");
} else {
Print("Error opening BUY order : ", GetLastError());
}
}
if (EachTickMode) TickCheck = True;
if (!EachTickMode) BarCount = Bars;
return(0);
}
}
//Sell
if (Order == SIGNAL_SELL && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
if(!IsTrade) {
//Check free margin
if (AccountFreeMargin() < (1000 * Lots)) {
Print("We have no money. Free Margin = ", AccountFreeMargin());
return(0);
}
if (UseStopLoss) StopLossLevel = Bid + StopLoss * Point; else StopLossLevel = 0.0;
if (UseTakeProfit) TakeProfitLevel = Bid - TakeProfit * Point; else TakeProfitLevel = 0.0;
Ticket = OrderSend(Symbol(), OP_SELL, Lots, Bid, Slippage, StopLossLevel, TakeProfitLevel, "Sell(#" + MagicNumber + ")", MagicNumber, 0, DeepPink);
if(Ticket > 0) {
if (OrderSelect(Ticket, SELECT_BY_TICKET, MODE_TRADES)) {
Print("SELL order opened : ", OrderOpenPrice());
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Bid, Digits) + " Open Sell");
} else {
Print("Error opening SELL order : ", GetLastError());
}
}
if (EachTickMode) TickCheck = True;
if (!EachTickMode) BarCount = Bars;
return(0);
}
}
if (!EachTickMode) BarCount = Bars;
return(0);
}
//+------------------------------------------------------------------+
- Free trading apps
- Over 8,000 signals for copying
- Economic news for exploring financial markets
You agree to website policy and terms of use
I can use some help coding an EA. I need to code an entry long if there is a new low made in the past (X) bars but the RSI is not making a new low. ie:
low < lowest low (10) and RSI > lowest RSI (10)
I am also looking to use just the opposite for shorting:
high > highest high (10) and RSI < highest RSI (10)
I am looking to add this into my current EA
Thanks