|
不
经验
|
8
产品
|
6
演示版
|
|
0
工作
|
0
信号
|
0
订阅者
|
Algorithmic Trading Systems Developer
I develop automated trading systems and risk-control tools for MetaTrader 5. I do not see a trading system as a strategy alone. Research, order execution, position management, account protection and the user interface all need to work as one coherent system.
A good backtest, by itself, does not convince me. What the system does when market structure changes, broker conditions differ, an order is rejected or the terminal restarts matters just as much as the final performance table.
Every idea starts as a hypothesis to be tested. I treat data quality, trading costs, execution assumptions and risk limits as part of the test, and I keep failed experiments in the record. This may sound cautious. It is. In trading software, knowing what should not be released is just as valuable as finding something that looks promising.
I regard backtest results as research evidence obtained under specific conditions, not as a promise of future performance. I therefore try to explain each product's operating conditions, requirements, risks and known limitations in plain language.
Behind my work is AURON, a private research and validation environment that I have built over time. I use it for strategy research, blind replay, holdout evaluation, execution scenarios, position management, risk controls and paper/forward observation. New ideas are challenged there from several directions before they can become products. Approaches that do not pass are discarded.
AURON is an internal R&D environment. The products I publish on the MQL5 Market do not depend on AURON or an external service. I keep the internal architecture of my research platform and algorithms private, but I do not hide the behavior, requirements or limitations that matter to the user.
My portfolio includes fully automated Expert Advisors, multi-asset systems and account-level risk-control tools. Each product is built for a defined purpose; I do not claim that any one product is suitable for every trader or every market condition.
You can contact me through MQL5 private messages if you have questions about installation, settings or product behavior. If a product is not a good fit for your needs, I would rather tell you before you buy it.
I develop automated trading systems and risk-control tools for MetaTrader 5. I do not see a trading system as a strategy alone. Research, order execution, position management, account protection and the user interface all need to work as one coherent system.
A good backtest, by itself, does not convince me. What the system does when market structure changes, broker conditions differ, an order is rejected or the terminal restarts matters just as much as the final performance table.
Every idea starts as a hypothesis to be tested. I treat data quality, trading costs, execution assumptions and risk limits as part of the test, and I keep failed experiments in the record. This may sound cautious. It is. In trading software, knowing what should not be released is just as valuable as finding something that looks promising.
I regard backtest results as research evidence obtained under specific conditions, not as a promise of future performance. I therefore try to explain each product's operating conditions, requirements, risks and known limitations in plain language.
Behind my work is AURON, a private research and validation environment that I have built over time. I use it for strategy research, blind replay, holdout evaluation, execution scenarios, position management, risk controls and paper/forward observation. New ideas are challenged there from several directions before they can become products. Approaches that do not pass are discarded.
AURON is an internal R&D environment. The products I publish on the MQL5 Market do not depend on AURON or an external service. I keep the internal architecture of my research platform and algorithms private, but I do not hide the behavior, requirements or limitations that matter to the user.
My portfolio includes fully automated Expert Advisors, multi-asset systems and account-level risk-control tools. Each product is built for a defined purpose; I do not claim that any one product is suitable for every trader or every market condition.
You can contact me through MQL5 private messages if you have questions about installation, settings or product behavior. If a product is not a good fit for your needs, I would rather tell you before you buy it.
Oguzhan Senturk
A short look at how Mihenk Signal Trader handles a trade from the first signal to the close, recorded on a live XAUUSD M1 chart.
• The signal: a BUY or SELL badge lands on the chart, and the panel has the trade ready: the stop just beyond the last swing, the lot worked out from your risk.
• Your stop: drag the stop line and the lot follows, while the risk stays at the percentage you chose.
• One press: the trade goes out with its stop attached.
• The manager: once the trade has made about what it risked, the stop moves past the entry, then follows the move step by step until the trade closes at the stop.
The management is not a fixed number of pips. Every step is measured from the trade's own stop, which comes from the swing structure of that chart, and the trailing distance respects that market's own volatility. Gold on M1, a currency pair on H1 or an index on M30 each get management sized to their own movement. Once it starts, the stop only moves forward, never back, and there are no levels to set by hand: the manager does it on the chart while MetaTrader 5 runs.
Forex, gold, indices and crypto, on every timeframe, with the panel in 11 languages.
Product page: https://www.mql5.com/en/market/product/202299
Full walkthrough on YouTube: https://www.youtube.com/watch?v=oPNgzJPsWQw
• The signal: a BUY or SELL badge lands on the chart, and the panel has the trade ready: the stop just beyond the last swing, the lot worked out from your risk.
• Your stop: drag the stop line and the lot follows, while the risk stays at the percentage you chose.
• One press: the trade goes out with its stop attached.
• The manager: once the trade has made about what it risked, the stop moves past the entry, then follows the move step by step until the trade closes at the stop.
The management is not a fixed number of pips. Every step is measured from the trade's own stop, which comes from the swing structure of that chart, and the trailing distance respects that market's own volatility. Gold on M1, a currency pair on H1 or an index on M30 each get management sized to their own movement. Once it starts, the stop only moves forward, never back, and there are no levels to set by hand: the manager does it on the chart while MetaTrader 5 runs.
Forex, gold, indices and crypto, on every timeframe, with the panel in 11 languages.
Product page: https://www.mql5.com/en/market/product/202299
Full walkthrough on YouTube: https://www.youtube.com/watch?v=oPNgzJPsWQw
Oguzhan Senturk
已发布产品
Mihenk Signal Trader 把一个信号或您自己的交易想法变成仓位大小合适的持仓，然后替您管理这笔持仓：保护止损、锁定利润，并跟随行情直到交易结束。入场由您决定，之后的一切交给面板。 首发价格：49 USD。 两种入场方式，一次点击 采用信号。 当图表上出现新的 BUY 或 SELL 标签时，面板会为您准备好交易：位于最近波段之外的建议止损，以及按您的风险计算的手数。确认后点击做多或做空。 按自己的想法交易。 把白色虚线止损线拖到您的价位。拖动时手数会按您的风险重新计算。然后点击做多或做空。 从这一刻起，交易由管理器接管。没有您的点击，任何交易都不会开仓。 持续为您工作的持仓管理 持仓不会只交给一条移动止损规则。管理器读取周期和止损距离，以判断这笔交易预计会持续多久；它用交易自身的风险和所在周期的波动来衡量每一个距离，而不是固定点数。短线和波段，货币对和黄金：同一套逻辑，各自按自己的尺度。 它会在每根新K线、每次有意义的价格变化、交易每次创出新高点时重新审视交易，行情平静时也每隔几秒检查一次。各项决策按固定顺序检查，每次只有一项生效： 思路失效时退出。
Oguzhan Senturk
**ATMACA Trade Manager MT5 — Four Positions, Four Independent Management Processes**
Four BTCUSD sell positions. One market, but not necessarily the same management decisions.
⚙️ **What happens after the entry?**
Once a position is opened, ATMACA manages it according to its own conditions rather than applying the same fixed trailing distance to every trade.
Each position is evaluated with its initial risk, stop distance, trading timeframe, volatility, price development and profit giveback taken into account.
A position that still needs room to develop may be managed differently from one that has already moved far enough to justify tighter protection.
This applies even when several positions are opened on the same symbol and in the same direction.
🔒 **Protecting profit as the market moves**
In this recording, four BTCUSD sell positions are open while ATMACA manages their protective stops.
As the market moves, the stop levels are adjusted individually. The protection follows the progress of each trade rather than a single trailing rule shared by all four positions.
ATMACA also keeps track of the overall risk and protected result across its managed positions.
The panel includes three particularly useful figures:
🔹 **AT RISK** — The amount currently exposed to potential loss.
🔹 **LOCKED** — Profit already protected by the current stop levels.
🔹 **IF ALL STOPS HIT** — The combined outcome if all managed positions were closed at their current protective stops.
As the stops advance, the last figure can move from a potential loss into protected profit.
📊 **Individual decisions, one account-wide view**
The MT5 Toolbox and ATMACA panel are shown together in this recording, so the individual stop adjustments and their combined effect on the account can be followed from the same screen.
ATMACA's management includes break-even protection, profit locking, adaptive trailing and exit decisions based on the conditions of each trade.
Protective stops are tightened as protection develops; normal management does not move them backwards to increase the original risk.
**The entry is your decision. What happens to each position afterwards is where ATMACA takes over.**
That is the main reason I built ATMACA: to manage open trades individually, without forcing different positions into identical stop-management rules.
📌 **ATMACA Trade Manager MT5**
Product details, settings, Strategy Tester demo and the full-length trade management video are available on MQL5 Market:
https://www.mql5.com/tr/market/product/197872
Four BTCUSD sell positions. One market, but not necessarily the same management decisions.
⚙️ **What happens after the entry?**
Once a position is opened, ATMACA manages it according to its own conditions rather than applying the same fixed trailing distance to every trade.
Each position is evaluated with its initial risk, stop distance, trading timeframe, volatility, price development and profit giveback taken into account.
A position that still needs room to develop may be managed differently from one that has already moved far enough to justify tighter protection.
This applies even when several positions are opened on the same symbol and in the same direction.
🔒 **Protecting profit as the market moves**
In this recording, four BTCUSD sell positions are open while ATMACA manages their protective stops.
As the market moves, the stop levels are adjusted individually. The protection follows the progress of each trade rather than a single trailing rule shared by all four positions.
ATMACA also keeps track of the overall risk and protected result across its managed positions.
The panel includes three particularly useful figures:
🔹 **AT RISK** — The amount currently exposed to potential loss.
🔹 **LOCKED** — Profit already protected by the current stop levels.
🔹 **IF ALL STOPS HIT** — The combined outcome if all managed positions were closed at their current protective stops.
As the stops advance, the last figure can move from a potential loss into protected profit.
📊 **Individual decisions, one account-wide view**
The MT5 Toolbox and ATMACA panel are shown together in this recording, so the individual stop adjustments and their combined effect on the account can be followed from the same screen.
ATMACA's management includes break-even protection, profit locking, adaptive trailing and exit decisions based on the conditions of each trade.
Protective stops are tightened as protection develops; normal management does not move them backwards to increase the original risk.
**The entry is your decision. What happens to each position afterwards is where ATMACA takes over.**
That is the main reason I built ATMACA: to manage open trades individually, without forcing different positions into identical stop-management rules.
📌 **ATMACA Trade Manager MT5**
Product details, settings, Strategy Tester demo and the full-length trade management video are available on MQL5 Market:
https://www.mql5.com/tr/market/product/197872
Oguzhan Senturk
**PUSULA MT5 — Not Every Pattern Becomes a Trade Plan**
One of the most important things I wanted PUSULA to do was explain not only where a trading setup exists, but also why a potential setup may not qualify for a trade plan.
This recording focuses on Range Manipulation, the chart layers and the multi-symbol Radar.
🎯 **Recognizing a manipulation doesn't always mean taking a trade**
The first example shows a defined trading range, marked by a purple rectangle, with a manipulation area highlighted above the Range High.
PUSULA identifies the upthrust but does not create a trade plan.
Instead, it explains why:
**"Manipulation upthrust — No plan: under 2R to target."**
The available distance to the target does not meet the required 2R threshold.
Price subsequently moves in the anticipated bearish direction, but the setup remains filtered out.
That distinction matters to me. A market idea can develop in the expected direction without satisfying the conditions required for a trade plan.
PUSULA keeps the detected structure visible and provides the reason for not proceeding.
⚙️ **Control what appears on your chart**
Using the toolbar at the bottom of the chart, I enable and disable different analysis layers:
🔹 **Strategies** — Show or hide the Range Manipulation setup and its related information.
🔹 **Sessions** — Display or hide the trading session areas.
🔹 **Zones** — Control the visibility of fair value gaps and other marked zones.
🔹 **Liquidity** — Show or hide liquidity levels.
The analysis stays organized while I choose which information to display.
🌐 **Radar — From one symbol to another**
Next, I open the Radar card.
The panel provides an overview of monitored symbols, directional readings and setup status.
BTCUSD is shown as **Waiting**, while EURJPY displays a recently completed ORB setup with a **+1R** result at the 16:00 exit.
I select EURJPY directly from the Radar.
PUSULA switches to the EURJPY chart, where its market structure, liquidity levels, session areas, FVGs and historical setups are available for examination.
📈 **Reviewing completed trade plans**
On EURJPY, I first examine the completed BUY ORB setup.
The blue signal arrow identifies the entry candle, while the chart shows the entry, stop and exit information. Its recorded result is:
**BUY · ORB · 16:00 EXIT · +1R**
I then move to an earlier Range Manipulation setup.
The chart displays the trading range, its upper and lower boundaries, and the manipulation area below the Range Low.
This completed setup has a recorded result of **+2.4R**.
The Range Manipulation layer can also be switched off and back on through the Strategies menu, keeping the chart as detailed or as clean as needed.
🧭 **Analysis with context**
PUSULA brings market structure, liquidity, setup conditions and historical trade plans into the same environment.
For me, the important distinction is that it doesn't simply mark a pattern and leave the trader guessing. It also provides context for the setup, including cases where the conditions are not sufficient to create a plan.
**A detected pattern, a rejected opportunity and a completed trade plan are different things — and PUSULA keeps that distinction visible.**
📌 **PUSULA Premium SMC Structure and Liquidity — MetaTrader 5**
Explore the complete feature set, screenshots, free Strategy Tester demo and longer product video on MQL5 Market:
https://www.mql5.com/en/market/product/199476
One of the most important things I wanted PUSULA to do was explain not only where a trading setup exists, but also why a potential setup may not qualify for a trade plan.
This recording focuses on Range Manipulation, the chart layers and the multi-symbol Radar.
🎯 **Recognizing a manipulation doesn't always mean taking a trade**
The first example shows a defined trading range, marked by a purple rectangle, with a manipulation area highlighted above the Range High.
PUSULA identifies the upthrust but does not create a trade plan.
Instead, it explains why:
**"Manipulation upthrust — No plan: under 2R to target."**
The available distance to the target does not meet the required 2R threshold.
Price subsequently moves in the anticipated bearish direction, but the setup remains filtered out.
That distinction matters to me. A market idea can develop in the expected direction without satisfying the conditions required for a trade plan.
PUSULA keeps the detected structure visible and provides the reason for not proceeding.
⚙️ **Control what appears on your chart**
Using the toolbar at the bottom of the chart, I enable and disable different analysis layers:
🔹 **Strategies** — Show or hide the Range Manipulation setup and its related information.
🔹 **Sessions** — Display or hide the trading session areas.
🔹 **Zones** — Control the visibility of fair value gaps and other marked zones.
🔹 **Liquidity** — Show or hide liquidity levels.
The analysis stays organized while I choose which information to display.
🌐 **Radar — From one symbol to another**
Next, I open the Radar card.
The panel provides an overview of monitored symbols, directional readings and setup status.
BTCUSD is shown as **Waiting**, while EURJPY displays a recently completed ORB setup with a **+1R** result at the 16:00 exit.
I select EURJPY directly from the Radar.
PUSULA switches to the EURJPY chart, where its market structure, liquidity levels, session areas, FVGs and historical setups are available for examination.
📈 **Reviewing completed trade plans**
On EURJPY, I first examine the completed BUY ORB setup.
The blue signal arrow identifies the entry candle, while the chart shows the entry, stop and exit information. Its recorded result is:
**BUY · ORB · 16:00 EXIT · +1R**
I then move to an earlier Range Manipulation setup.
The chart displays the trading range, its upper and lower boundaries, and the manipulation area below the Range Low.
This completed setup has a recorded result of **+2.4R**.
The Range Manipulation layer can also be switched off and back on through the Strategies menu, keeping the chart as detailed or as clean as needed.
🧭 **Analysis with context**
PUSULA brings market structure, liquidity, setup conditions and historical trade plans into the same environment.
For me, the important distinction is that it doesn't simply mark a pattern and leave the trader guessing. It also provides context for the setup, including cases where the conditions are not sufficient to create a plan.
**A detected pattern, a rejected opportunity and a completed trade plan are different things — and PUSULA keeps that distinction visible.**
📌 **PUSULA Premium SMC Structure and Liquidity — MetaTrader 5**
Explore the complete feature set, screenshots, free Strategy Tester demo and longer product video on MQL5 Market:
https://www.mql5.com/en/market/product/199476
Oguzhan Senturk
**PUSULA MT5 — Market Structure, Liquidity and Trade Planning in One Workspace**
I developed PUSULA to bring market analysis and trade planning into one chart, while giving traders control over how they want to work.
The attached recording covers the first steps of using PUSULA, its interface controls and an Opening Range Breakout (ORB) example.
🌍 **7 Languages — One Interface**
PUSULA supports English, Turkish, Russian, Chinese, Spanish, Portuguese and German.
I start by opening the Language setting, show the available languages and select English before loading the indicator.
🧩 **A Workspace Built Around Your Preferences**
The Cards menu gives you access to five panels:
**Chart Reading** — Explains the current market direction, what price is doing and which conditions are still needed for a setup.
**Plan** — Displays the active setup, its progression and the relevant trade levels.
**Liquidity Ladder** — Organizes nearby liquidity levels above and below the current price.
**Radar** — Follows multiple symbols and shows where setups are developing.
**Timeframes** — Provides market structure readings across eight timeframes, from M1 to W1.
Each card can be opened, collapsed or hidden independently. You decide which information stays visible.
🖱️ **Free Chart — Move Beyond the Standard MT5 Chart**
With Free Chart enabled, PUSULA draws its own interactive chart.
You can drag the chart horizontally and vertically, zoom with the mouse wheel or Ctrl + wheel, adjust the view around the area you're studying and position price action where you want it.
When Free Chart is disabled, your original chart drawings are restored.
🎯 **From an ORB Setup to Its Final Result**
In the final part of the recording, I open the Strategies menu and enable the Opening Range Breakout setup.
PUSULA marks the New York 09:30–10:00 opening range, the entry signal, the stop level and the scheduled New York 16:00 exit.
The blue BUY arrow identifies the signal candle. The completed example shown in the recording closes at **+1.5R**, with its result displayed on the chart:
**BUY · ORB · 16:00 EXIT · +1.5R**
The entry, stop, exit and outcome remain connected to the actual setup rather than being separate drawings.
⚙️ **More Than What Is Shown in This Recording**
🔹 **Three setup models:** Reversal, Range Manipulation and Opening Range Breakout, individually selectable from the Strategies menu.
🔹 **Confirmed market structure:** BOS, CHoCH, liquidity sweeps, fair value gaps and order blocks, with structure decisions based on closed candles.
🔹 **Trade plans with risk information:** Entry, stop, applicable targets and estimated lot size calculated from your selected risk.
🔹 **Setup transparency:** Follow the conditions as they develop, review completed historical plans and optionally display filtered setups with the reason they were rejected.
🔹 **Additional analysis tools:** Flow Trail, automatic Fibonacci, Asia/London session levels, multi-timeframe readings and multi-symbol Radar.
🔹 **Alerts and guidance:** Pop-up, sound, mobile push and email notifications, plus an integrated guide explaining the chart elements and their meaning.
PUSULA is an indicator rather than an automated trading EA. It organizes the analysis and prepares the trade plan, while the decision to trade remains yours.
**What matters to me is that the structure, the reasoning behind a setup and the resulting plan can all be examined from the same chart.**
📌 **PUSULA Premium SMC Structure and Liquidity — MetaTrader 5**
Explore the full feature description, screenshots, free Strategy Tester demo and longer product video on MQL5 Market:
[https://www.mql5.com/en/market/product/199476](https://www.mql5.com/en/market/product/199476)
I developed PUSULA to bring market analysis and trade planning into one chart, while giving traders control over how they want to work.
The attached recording covers the first steps of using PUSULA, its interface controls and an Opening Range Breakout (ORB) example.
🌍 **7 Languages — One Interface**
PUSULA supports English, Turkish, Russian, Chinese, Spanish, Portuguese and German.
I start by opening the Language setting, show the available languages and select English before loading the indicator.
🧩 **A Workspace Built Around Your Preferences**
The Cards menu gives you access to five panels:
**Chart Reading** — Explains the current market direction, what price is doing and which conditions are still needed for a setup.
**Plan** — Displays the active setup, its progression and the relevant trade levels.
**Liquidity Ladder** — Organizes nearby liquidity levels above and below the current price.
**Radar** — Follows multiple symbols and shows where setups are developing.
**Timeframes** — Provides market structure readings across eight timeframes, from M1 to W1.
Each card can be opened, collapsed or hidden independently. You decide which information stays visible.
🖱️ **Free Chart — Move Beyond the Standard MT5 Chart**
With Free Chart enabled, PUSULA draws its own interactive chart.
You can drag the chart horizontally and vertically, zoom with the mouse wheel or Ctrl + wheel, adjust the view around the area you're studying and position price action where you want it.
When Free Chart is disabled, your original chart drawings are restored.
🎯 **From an ORB Setup to Its Final Result**
In the final part of the recording, I open the Strategies menu and enable the Opening Range Breakout setup.
PUSULA marks the New York 09:30–10:00 opening range, the entry signal, the stop level and the scheduled New York 16:00 exit.
The blue BUY arrow identifies the signal candle. The completed example shown in the recording closes at **+1.5R**, with its result displayed on the chart:
**BUY · ORB · 16:00 EXIT · +1.5R**
The entry, stop, exit and outcome remain connected to the actual setup rather than being separate drawings.
⚙️ **More Than What Is Shown in This Recording**
🔹 **Three setup models:** Reversal, Range Manipulation and Opening Range Breakout, individually selectable from the Strategies menu.
🔹 **Confirmed market structure:** BOS, CHoCH, liquidity sweeps, fair value gaps and order blocks, with structure decisions based on closed candles.
🔹 **Trade plans with risk information:** Entry, stop, applicable targets and estimated lot size calculated from your selected risk.
🔹 **Setup transparency:** Follow the conditions as they develop, review completed historical plans and optionally display filtered setups with the reason they were rejected.
🔹 **Additional analysis tools:** Flow Trail, automatic Fibonacci, Asia/London session levels, multi-timeframe readings and multi-symbol Radar.
🔹 **Alerts and guidance:** Pop-up, sound, mobile push and email notifications, plus an integrated guide explaining the chart elements and their meaning.
PUSULA is an indicator rather than an automated trading EA. It organizes the analysis and prepares the trade plan, while the decision to trade remains yours.
**What matters to me is that the structure, the reasoning behind a setup and the resulting plan can all be examined from the same chart.**
📌 **PUSULA Premium SMC Structure and Liquidity — MetaTrader 5**
Explore the full feature description, screenshots, free Strategy Tester demo and longer product video on MQL5 Market:
[https://www.mql5.com/en/market/product/199476](https://www.mql5.com/en/market/product/199476)
Oguzhan Senturk
*ATMACA Trade Manager MT5 — Risk Control Across Multiple Markets*
One of the things I wanted from ATMACA was the freedom to work on different charts without interrupting the management of trades already open.
🎯 **It starts with the stop.**
On BTCUSD, I position the NEW TRADE STOP line manually before entering. Some trades are opened with tight stops, others with much wider ones.
ATMACA provides three position-sizing modes: Automatic, Loss Target and Leveraged. Each offers a different way to define the size of a new trade, while positions already open continue under their existing management rules.
⚙️ **The management continues after entry.**
Each trade has its own initial risk, market context and management horizon. ATMACA uses these conditions to manage stop protection, trailing and exits individually, rather than applying an identical trailing distance to every position.
🌐 **Then I move to another market.**
With one BTCUSD position still open and being managed by ATMACA, I switch to USDJPY and attach ATMACA to that chart as well.
Here, I set **Account Capital to $1,000**.
This setting lets ATMACA work with a defined trading capital amount for account-level sizing and risk limits, without changing the actual broker account balance.
I open new USDJPY trades, and ATMACA manages them while the BTCUSD trade continues running in the background.
Different symbols, different stop distances and different trading conditions — with each position managed according to its own characteristics.
**I stay in control of the entries and initial risk. ATMACA takes responsibility for the ongoing management.**
📌 **ATMACA Trade Manager MT5**
Product details, settings, demo and the full-length trade management video are available on MQL5 Market:
👉 https://www.mql5.com/tr/market/product/197872?source=Site+Search
One of the things I wanted from ATMACA was the freedom to work on different charts without interrupting the management of trades already open.
🎯 **It starts with the stop.**
On BTCUSD, I position the NEW TRADE STOP line manually before entering. Some trades are opened with tight stops, others with much wider ones.
ATMACA provides three position-sizing modes: Automatic, Loss Target and Leveraged. Each offers a different way to define the size of a new trade, while positions already open continue under their existing management rules.
⚙️ **The management continues after entry.**
Each trade has its own initial risk, market context and management horizon. ATMACA uses these conditions to manage stop protection, trailing and exits individually, rather than applying an identical trailing distance to every position.
🌐 **Then I move to another market.**
With one BTCUSD position still open and being managed by ATMACA, I switch to USDJPY and attach ATMACA to that chart as well.
Here, I set **Account Capital to $1,000**.
This setting lets ATMACA work with a defined trading capital amount for account-level sizing and risk limits, without changing the actual broker account balance.
I open new USDJPY trades, and ATMACA manages them while the BTCUSD trade continues running in the background.
Different symbols, different stop distances and different trading conditions — with each position managed according to its own characteristics.
**I stay in control of the entries and initial risk. ATMACA takes responsibility for the ongoing management.**
📌 **ATMACA Trade Manager MT5**
Product details, settings, demo and the full-length trade management video are available on MQL5 Market:
👉 https://www.mql5.com/tr/market/product/197872?source=Site+Search
Oguzhan Senturk
**ATMACA Trade Manager MT5 — Every Trade Has Its Own Management**
A recording of ATMACA handling trade entries and managing positions across two different markets.
🎯 **Trade setup and risk**
I start by dragging the NEW TRADE STOP line to the level I want on the chart. From there, I can open trades using three different position-sizing modes:
- **Automatic:** ATMACA calculates the position size based on the selected risk profile.
- **Loss Target:** I specify the percentage of capital I'm prepared to risk at the stop.
- **Leveraged:** I choose a minimum and maximum position value.
Throughout the recording, I open multiple BTCUSD trades, sometimes with tight stops and sometimes with much wider ones.
⚙️ **Individual trade management**
This is the main reason I developed ATMACA.
Once a trade is open, ATMACA takes over its management. Each position has its own trading horizon, determined from the conditions at entry, including stop distance, timeframe, volatility and market structure.
The management isn't based on a fixed trailing distance applied to every position.
ATMACA handles stop adjustments, profit protection, trailing and exit decisions according to each trade's own conditions.
A short-term trade and a longer-term trade don't necessarily need the same treatment, even when they're opened on the same symbol.
🌐 **Managing different markets at the same time**
Later in the recording, I switch to USDJPY, attach another instance of ATMACA and set Account Capital to $1,000.
I then open trades on USDJPY while ATMACA continues managing an existing BTCUSD position in the background.
Each symbol has its own chart and management process. Switching between them doesn't interrupt the management of the other trade.
**ATMACA was developed to manage what happens after entry, with each position handled according to its own trading horizon, market conditions and risk characteristics. Rather than forcing different trades into the same fixed management rules, it adapts its decisions to the individual position.**
You choose the entry, initial stop and risk. ATMACA handles the ongoing trade management.
📌 **ATMACA Trade Manager MT5**
Product details, settings, demo and the full-length demonstration video are available on MQL5 Market:
https://www.mql5.com/tr/market/product/197872?source=Site+Search
A recording of ATMACA handling trade entries and managing positions across two different markets.
🎯 **Trade setup and risk**
I start by dragging the NEW TRADE STOP line to the level I want on the chart. From there, I can open trades using three different position-sizing modes:
- **Automatic:** ATMACA calculates the position size based on the selected risk profile.
- **Loss Target:** I specify the percentage of capital I'm prepared to risk at the stop.
- **Leveraged:** I choose a minimum and maximum position value.
Throughout the recording, I open multiple BTCUSD trades, sometimes with tight stops and sometimes with much wider ones.
⚙️ **Individual trade management**
This is the main reason I developed ATMACA.
Once a trade is open, ATMACA takes over its management. Each position has its own trading horizon, determined from the conditions at entry, including stop distance, timeframe, volatility and market structure.
The management isn't based on a fixed trailing distance applied to every position.
ATMACA handles stop adjustments, profit protection, trailing and exit decisions according to each trade's own conditions.
A short-term trade and a longer-term trade don't necessarily need the same treatment, even when they're opened on the same symbol.
🌐 **Managing different markets at the same time**
Later in the recording, I switch to USDJPY, attach another instance of ATMACA and set Account Capital to $1,000.
I then open trades on USDJPY while ATMACA continues managing an existing BTCUSD position in the background.
Each symbol has its own chart and management process. Switching between them doesn't interrupt the management of the other trade.
**ATMACA was developed to manage what happens after entry, with each position handled according to its own trading horizon, market conditions and risk characteristics. Rather than forcing different trades into the same fixed management rules, it adapts its decisions to the individual position.**
You choose the entry, initial stop and risk. ATMACA handles the ongoing trade management.
📌 **ATMACA Trade Manager MT5**
Product details, settings, demo and the full-length demonstration video are available on MQL5 Market:
https://www.mql5.com/tr/market/product/197872?source=Site+Search
Oguzhan Senturk
**ATMACA — Managing Every Trade on Its Own Terms**
Here's a short, sped-up recording of ATMACA managing four BTCUSD sell positions.
I developed ATMACA mainly for what happens after a trade is opened.
You decide where and when to enter, choose the direction, set your initial stop and define your risk. ATMACA calculates the position size and margin before entry. Once the order is filled, it takes over the management.
This is where ATMACA differs from a conventional trailing stop.
It doesn't simply move every stop to breakeven at a fixed profit level or follow the price by a fixed number of pips.
Each position is evaluated separately. ATMACA considers its initial risk, trading timeframe, volatility, how far the trade has travelled and how much of that move has been given back.
One trade might need more room to develop. Another might already need tighter protection. Even positions on the same symbol can receive different management decisions.
ATMACA handles stop protection, profit locking, adaptive trailing and exits as the conditions of each trade change. During normal management, protective stops are only tightened, never moved back to increase the original risk.
**Watch the GIF closely.**
Four sell positions are open. As the price moves, ATMACA adjusts their stops individually. The account-wide "IF ALL STOPS HIT" figure gradually moves from a potential loss into protected profit.
That's the part of trading I built ATMACA to handle: managing open positions without treating every trade as if it were the same.
The recording demonstrates how the management works, not a guarantee of trading results.
The full demonstration video, detailed explanation and Strategy Tester demo are available on the MQL5 product page.
**ATMACA Trade Manager MT5:**
https://www.mql5.com/tr/market/product/197872
**Full video on YouTube:**
https://www.youtube.com/watch?v=Igot-DntW4I
Here's a short, sped-up recording of ATMACA managing four BTCUSD sell positions.
I developed ATMACA mainly for what happens after a trade is opened.
You decide where and when to enter, choose the direction, set your initial stop and define your risk. ATMACA calculates the position size and margin before entry. Once the order is filled, it takes over the management.
This is where ATMACA differs from a conventional trailing stop.
It doesn't simply move every stop to breakeven at a fixed profit level or follow the price by a fixed number of pips.
Each position is evaluated separately. ATMACA considers its initial risk, trading timeframe, volatility, how far the trade has travelled and how much of that move has been given back.
One trade might need more room to develop. Another might already need tighter protection. Even positions on the same symbol can receive different management decisions.
ATMACA handles stop protection, profit locking, adaptive trailing and exits as the conditions of each trade change. During normal management, protective stops are only tightened, never moved back to increase the original risk.
**Watch the GIF closely.**
Four sell positions are open. As the price moves, ATMACA adjusts their stops individually. The account-wide "IF ALL STOPS HIT" figure gradually moves from a potential loss into protected profit.
That's the part of trading I built ATMACA to handle: managing open positions without treating every trade as if it were the same.
The recording demonstrates how the management works, not a guarantee of trading results.
The full demonstration video, detailed explanation and Strategy Tester demo are available on the MQL5 product page.
**ATMACA Trade Manager MT5:**
https://www.mql5.com/tr/market/product/197872
**Full video on YouTube:**
https://www.youtube.com/watch?v=Igot-DntW4I
Oguzhan Senturk
已发布产品
您的入场思路在所选市场和周期中表现如何？Mihenk 是一款免费的 MetaTrader 5 指标，将信号测试、图表分析和多品种扫描整合到一个面板中。您可以调整预设入场规则以适配自己的策略，比较其历史表现，并实时跟踪所选信号。 选择、调整并测试您的入场思路 Signal test 提供四组共 19 种可调整的入场规则：指标、蜡烛图形态、突破与趋势、流动性扫掠。使用 RSI turn 评估 RSI 从超买或超卖区域回转的情况，使用 Moving average cross 评估移动平均线交叉，使用 Engulfing candle 评估吞没形态。您也可以在同一张图表上比较 Pullback in a trend 和 Liquidity sweep 等其他方法。 选择规则后，使用 + 和 - 按钮调整周期与阈值，并设置买入/卖出方向、EMA200 趋势过滤条件以及信号之后需要测量的蜡烛数量。Mihenk 会用一句清晰的描述展示所选规则，并在设置改变时自动更新测量结果。例如，调整 RSI 阈值，即可观察样本数量和历史结果如何变化。 在 Details
Oguzhan Senturk
已发布产品
看清结构与流动性，在图表上读取交易计划。 Pusula 将市场结构、流动性和 SMC 形态整合到 MetaTrader 5 的同一工作区中。 BOS、CHoCH、流动性扫荡、FVG 和订单块区域会自动绘制在图表上。图表解读卡用简单的语言说明市场做了什么，以及形态还在等待哪个条件。当三种策略中的某一种满足条件时， 入场、止损、目标和根据您的风险计算的手数 会显示在同一个计划中；检查清单和提醒会解释计划形成的原因。 使用多品种雷达扫描形态，在一张卡片中比较八个周期的结构，并选择需要的图层。Pusula 提供分析和计划，交易决策由您作出。 Pusula 的不同之处 不只是画图，而是解读。 “图表解读”卡片首先回答三个问题：方向、市场现在在等待什么、哪个事件将促成计划。下方的检查清单会随着每一步的发生自动打勾。 像持仓工具一样绘制的计划。 带价格的入场、止损和目标，风险区与目标区，显示状态和以 R 计结果的标签，以及根据您的余额和风险百分比计算的手数。过去的计划连同其结局一起保留在图表上，方便复盘。 有名称的流动性。
Oguzhan Senturk
已发布产品
设置止损，查看风险，让 ATMACA 管理交易。 ATMACA 在一个 MetaTrader 5 面板中整合交易准备和持仓管理。在图表上设置止损； 入场前即可查看手数、触及止损时的预估亏损和所需保证金。 由您选择方向，并通过 ATMACA 面板上的 LONG 或 SHORT 按钮开仓。 并非所有交易都采用相同的跟踪距离。 ATMACA 根据持仓的风险（R）、波动率（ATR）和交易周期，管理止损保护、利润锁定、移动止损和退出。它不会将止损扩大到比入场时设定的初始价位更远的位置，并会在面板中说明管理决策。 首发价格： 前 20 位买家 39 USD，之后为 99 USD。 四步上手 放置止损。 把图表上白色的"新交易止损"线拖到您认为"价格到了这里，我的判断就不成立了"的位置。这条线是 ATMACA 唯一需要的风险输入。 选择仓位模式。 在您按下任何按钮之前，面板就会显示手数、止损触发时您将损失的金额以及账户占用情况。 选择方向。 按 LONG 或 SHORT。交易请求会立即发送；成交时间和价格取决于经纪商和市场条件。 观察管理过程。 ATMACA
Oguzhan Senturk
已发布产品
DRAKOR is a dual-market MetaTrader 5 Expert Advisor for BTCUSD and USDJPY. It runs two independent engines from one chart, using completed H1 data and broker-side stop losses. The engines share no signal, position or risk budget, so the product combines two different markets rather than duplicating one strategy. DRAKOR uses no grid, martingale, averaging down or recovery sizing. It contains no DLL, news feed or external data file. Position size is calculated separately for each engine from the
Oguzhan Senturk
已发布产品
CUPELLA GOLD TRIAD is an Expert Advisor for XAUUSD that combines three independent trading engines in one account. Each engine works on a different timeframe and follows its own entry conditions. The purpose of combining them is not to increase the number of simultaneous trades, but to reduce dependence on a single type of gold market. Every position is opened with a hard stop loss. Position size is calculated from account equity and stop distance, so a wider stop produces a smaller position
Oguzhan Senturk
已发布产品
LUSIDA is a MetaTrader 5 Expert Advisor built for prop firm challenge, funded and personal-account use. It trades EURUSD, XAUUSD and USDJPY from one chart while tracking the active account rules. Challenge mode works toward the target, Funded mode lowers position risk, and Personal account mode runs the same trading engine without prop firm targets. The user remains in control: LUSIDA sends no order until START is pressed, and reaching a target does not automatically declare an account approved
Oguzhan Senturk
已发布产品
PropGuard is a MetaTrader 5 utility that watches a prop firm account against the firm's own rules and acts before a limit is breached. It does not open trades and contains no trading strategy. It reads your account, shows how much room is left, and can close positions and block further trading when a limit you configured is reached. A prop firm account is lost on a rule, not on a bad trade. The daily loss limit, the maximum loss limit and the trailing reference are arithmetic that runs whether