Build an indicator based on ichimoku

MQL4 指标 C++ C# Java JavaScript Python

工作已完成

执行时间5 天
客户反馈
Very good developer, rigorous work and very professional. I recommend this person who will bring much more than needed with assistance even after delivery. Thank you for this great job.
员工反馈
You're welcome,Thank you...

指定

indicator based on ichimoku


The idea:

Create an indicator able to make alerts, send mails based on the indicator ichimoku.


  1. the indicator must run on MT4

  2. it should not work at night. There should be two parameters:

    StartHour - the hour to start operation;
    EndHour - the hour to end operation.


  1. Add parameters for Enabling notifications:

    SendPush - allow sending push notifications
    SendEmail - allow sending emails


  1. The indicator must operate on different timeframes that ichimoku indicator uses. By default it will be on M1 and it will be possible to choose another timeframe


  1. The alert or statement will be made only if the following conditions are completed in a situation of purchase:

    1. If the price breaks the cloud all the way up and the candle close over the cloud

    2. If the price breaks the tenkan and kinjun simultaneously and the candle closes above the two

    3. If the price close above the kinjun

    4. If the price close above the cloud

    5. Show on the chart an arrow to show where the alert occur

= buy alert, mail, push notification.


  1. The alert or stance should be done only if the following conditions are completed in a selling situation:

    1. If the price breaks the cloud all the way down and the candle closes below the cloud

    2. If the price breaks the tenkan and kinjun simultaneously and the candle closes below the two

    3. If the price break and close below the kinjun

    4. If the price is below the cloud

    5. Show on the chart an arrow to show where the alert occur

= sell alert, mail, push notification.



  1. All these parameters should be activable, deactivable and configurable if possible. It sould work with some of the parameters desactivated and it sould work with all the parameters activated with no duplicated alert.

  2. Comment the code in a way that is understandable to facilitate editing.





















































反馈

1
开发者 1
等级
(114)
项目
154
47%
仲裁
2
0% / 50%
逾期
4
3%
空闲
2
开发者 2
等级
(430)
项目
606
55%
仲裁
48
23% / 56%
逾期
176
29%
空闲
3
开发者 3
等级
(229)
项目
339
49%
仲裁
21
5% / 33%
逾期
24
7%
空闲
4
开发者 4
等级
(5)
项目
4
25%
仲裁
2
0% / 100%
逾期
1
25%
空闲
5
开发者 5
等级
(270)
项目
552
49%
仲裁
58
40% / 36%
逾期
228
41%
工作中
6
开发者 6
等级
(277)
项目
334
55%
仲裁
14
36% / 29%
逾期
1
0%
空闲
7
开发者 7
等级
(15)
项目
24
21%
仲裁
1
0% / 100%
逾期
7
29%
空闲
8
开发者 8
等级
(221)
项目
369
66%
仲裁
10
50% / 0%
逾期
46
12%
空闲
9
开发者 9
等级
(68)
项目
111
26%
仲裁
17
6% / 71%
逾期
15
14%
空闲
发布者: 9 代码
10
开发者 10
等级
(69)
项目
146
34%
仲裁
13
8% / 62%
逾期
26
18%
空闲
发布者: 6 代码
相似订单
I have an issue with my ninja script and i would like you to help me straighten things I wanted to create an indicator and i have the source code already but i am getting compiling errors on my NinjaTrader And i tried fixing the error it still same I sent 3 images here for you to understand the errors and i would like to ask if you can help me fix it so i can go ahead and compile my source code. Thanks
Good day, I would like to build an automated trading system for Ninjatrader using 2 MACD, a Supertrend, and a moving average indicator. I want the option to adjust the indicator settings, the ability to trade at three different times, and the option to receive alerts. I want to get an idea of what that will cost me. It will enter trades on all blue take one contract out at a fixed point, move the stop to break even
Good day, I would like to build an automated trading system for Ninjatrader using 2 MACD, a Supertrend, and a moving average indicator. I want the option to adjust the indicator settings, the ability to trade at three different times, and the option to receive alerts. I want to get an idea of what that will cost me. It will enter trades on all blue take one contract out at a fixed point, move the stop to break even
I have an indicator i need automated i use it manually and it plots arrows. Can you automate it for my Ninjatrader8? Do you need to see file? Expert Ninjatrader Developer can Bid for this project
Looking for NinjaTrader 8 Developer I’m looking for an experienced NinjaTrader 8 (C#) developer to build a custom indicator based on the Jackson–Dalton Trading System . Requirements: Jackson zones (Z1 / Z2 / Z3) VWAP with volume-weighted standard deviation Session volume profile (POC, VAH, VAL) Day-type classification Configurable alerts Support for BTC/USDT and ETH/USDT Clean, modular code with full source Optional
Hey bro, can you help with NT8. On a vps, multiple algos and prop account but the strategies keep getting out of sync, going from true to false for no reason….. mid trade it pops errors.The algo codes are locked… other than that it’s open VPs, NT8 and strategy is open You will notice in the strategies xml that there are standard, then 100k and 50k versions…… Also I did version that are in strategy labeled "Apex"
I would like to create an indicator for my strategy on trading view , my strategy involves a liquidity sweep , wick or candle body closure , this needs to happen inside a higher time frame pd array such as a fair value gap that’s atleast 5m + and there needs to be an inversion fair value gap for my entry , I want the fair value gaps on all time frames so I can see them all on the 1 minute chart but i want the fair
can you help me with making a simple tradingview/script that draws boxes labeling consolidation areas according to my specifications? IF anyone can help with this kindly do well to bid to this so we can discuss more about the project thanka
MetaTrader 5 (MQL5) için Expert Advisor geliştirecek TÜRK MQL5 yazılımcı arıyorum. 📌 Gereksinimler: - MQL5 diline hâkim (MT5 native) - Daha önce çalışır EA / indikatör teslim etmiş - Temiz, modüler ve yorumlu kod yazabilen - Debug ve backtest sürecine destek verebilen - Kaynak kodu (.mq5) teslim edebilen 📌 EA Özeti: - Kendi stratejime uygun işlem alacak - Xauusd ve SPX500 işlem alacak. - Günlük bias kontrolü
I'm seeking a NinjaTrader indicator and scanner to identify stock patterns for swing trading. I need this tool to help pinpoint swing highs and lows and key levels, covering various timeframes. Scope of work - Develop NinjaTrader indicator for last swing high and low - Implement key level marking for supply and demand zones - Create a market analyser scanner for reversal, structure shifts, and breakout patterns -

项目信息

预算
30+ USD