Multiple Time Frame and Currency Pair Stochastic Indicator

指标

工作已完成

执行时间7 天
员工反馈
Thank you for your order!
客户反馈
ForexMTS is a fantastic programmer whose code is very efficient, easy-to-understand and does exactly what I want but that's not all. He is very quick to respond to any messages, understood my complex needs completely and delivered the final work ahead of schedule. Using his initiative, he made a couple of suggestions for improvement to the original job post and thoroughly tested the code before submitting it. His level of English is very impressive, probably the best I've seen on this site. All round, this is one great programmer which receives my highest recommendation. I will definitely make use of his services in the future.

指定

I would like a multiple time frame Stochastic indicator coded for MT4 to scan all required time frames and specified currency pairs for a particular set up described below.

The following time frames will need to be actively monitored:

M5
M15
M30
H1
H4
D1

The following currency pairs available from my broker need to be actively monitored:

AUDCAD
AUDCHF
AUDJPY
AUDNZD
AUDSGD
AUDUSD
CADCHF
CADJPY
CHFJPY
EURAUD
EURCAD
EURCHF
EURGBP
EURJPY
EURNZD
EURUSD
GBPAUD
GBPCAD
GBPCHF
GBPJPY
GBPNZD
GBPUSD
NZDJPY
NZDUSD
USDCAD
USDCHF
USDSGD
USDJPY
USDZAR
XAGUSD
XAUUSD

Each time frame will use readings from 3 standard Stochastics on multiple time frames as follows:

Stochastic 1 will be the current time frame's Stochastic using a setting of (14, 3, 3).
Stochastic 2 and 3 will be the higher time frame's Stochastic. Stochastic 2 will be (14, 3, 3) and Stochastic 3 will be (100, 3, 3).

The list below dictates what the higher time frame for any currently used time frame will be:

M5 will use M30 as its higher time frame
M15 will use H1 as its higher time frame
M30 will use H4 as its higher time frame
H1 will use H4 as its higher time frame
H4 will use D1 as its higher time frame
D1 will use W1 as its higher time frame

Example:

The M15 chart is being monitored. It will use Stochastic 1 (14, 3, 3).
It will also use readings from S2 (14, 3, 3) and S3 (100, 3, 3) both from the H1 time frame.


When the following conditions for a Potential Long are met, I want both an audio and pop up window alert:

When the current time frame Stochastic (S1) has a Stochastic and signal line both reading <=30 AND the higher time frame Stochastic (S2) has a Stochastic and signal line both reading >=70 AND the second higher time frame Stochastic (S3) has a Stochastic and signal line both reading >=80 then an audio alert must trigger as well as a pop up window stating "Potential Long - CURRENCY_PAIR - TIME_FRAME - CURRENT_MARKET_PRICE" where CURRENCYPAIR = whichever currency pair is giving a signal (e.g. EURUSD) and TIME_FRAME = the time frame for the currency pair that is giving the condition alert (e.g. M15) and CURRENT_MARKET_PRICE = the price at the time the alert was triggered.


When the following conditions for a Potential Short are met, I want both an audio and pop up window alert:

When the current time frame Stochastic (S1) has a Stochastic and signal line both reading >=70 AND the higher time frame Stochastic (S2) has a Stochastic and signal line both reading <=30 AND the second higher time frame Stochastic (S3) has a Stochastic and signal line both reading <=20 then an audio alert must trigger as well as a pop up window stating "Potential Short - CURRENCY_PAIR - TIME_FRAME - CURRENT_MARKET_PRICE" where CURRENCYPAIR = whichever currency pair is giving a signal (e.g. EURUSD) and TIME_FRAME = the time frame for the currency pair that is giving the condition alert (e.g. M15) and CURRENT_MARKET_PRICE = the price at the time the alert was triggered.

When the indicator is applied to a chart (e.g. GBPUSD, M5) I also want a dashboard view so that I only have to have one chart up for this indicator to monitor all abovementioned currency pairs and time frames.

It must have a table structure that lists all the currency pairs along the left-hand side of the chart and the time frames along the top of the chart.

Under each time frame for each currency pair, it must display the state of S1, S2 and S3 as LONG, SHORT or NEUTRAL based on current conditions (see example below). LONG must be displayed in green, SHORT must be displayed in red and NEUTRAL must be displayed in GREY.

I want the indicator to update every minute for all time frames (60 second update intervals).

Example:

The AUDJPY currency pair on the H4 time frame has an S1 reading of 56, an S2 reading of 80 and an S3 reading of 96.

In the indicator window next to AUDJPY under the H4 column, S1 must read Neutral, S2 must read Long and S3 must also read Long.

As time progresses and S1 reaches 30 or less, an audio and pop up window alert must trigger and the indicator window should now show S1 as Long.

Below is a list of the parameters I want to be able to edit when applying the indicator to a chart as well as the default values that should be used.

S1 %K for all time frames (Default value = 14)
S1 %D for all time frames (Default value = 3)
S1 Slowing for all time frames (Default value = 3)
S1 Alert level for Long (Default value <= 30)
S1 Alert level for Short (Default value >= 70)

S2 %K for all time frames (Default value = 14)
S2 %D for all time frames (Default value = 3)
S2 Slowing for all time frames (Default value = 3)
S2 Alert level for Long (Default value <= 70)
S2 Alert level for Short (Default value >= 30)

S3 %K for all time frames (Default value = 100)
S3 %D for all time frames (Default value = 3)
S3 Slowing for all time frames (Default value = 3)
S3 Alert level for Long (Default value <= 80)
S3 Alert level for Short (Default value >= 20)

The S1, S2 and S3 levels that I can edit must be single settings that apply to all time frames and currency pairs.

Example:

If I decide to later change the S3 %K to 85, I want to only have to edit the S3 %K setting once when applying the indicator to the chart and it must use that setting for all time frames and currency pairs, therefore, only the 15 abovementioned settings must be editable, not 15 x CURRENCY_PAIRS x TIME_FRAMES.

反馈

1
开发者 1
等级
项目
0
0%
仲裁
0
逾期
0
空闲
2
开发者 2
等级
(564)
项目
845
73%
仲裁
15
53% / 13%
逾期
193
23%
空闲
3
开发者 3
等级
(187)
项目
367
56%
仲裁
45
22% / 56%
逾期
188
51%
空闲
发布者: 1 文章, 6 代码
4
开发者 4
等级
(59)
项目
182
55%
仲裁
31
45% / 16%
逾期
103
57%
空闲
5
开发者 5
等级
(73)
项目
257
53%
仲裁
16
50% / 38%
逾期
83
32%
空闲
6
开发者 6
等级
(21)
项目
35
54%
仲裁
8
63% / 38%
逾期
1
3%
空闲
相似订单
//+------------------------------------------------------------------+ //| Durban Gold Hunter.mq5 (v3.00) | //| Multi-pair EA for MetaTrader 5 (Razor Markets, XM). | //| Strategy modules (each can be switched on/off): | //| 1. EMA crossover | //| 2. 714 method (EMA 7 + RSI 14) | //| 3. CRT (Candle Range Theory: range sweep and close back inside)| //| 4. Trend line breakout (auto-drawn from swing highs/lows) | //| 5
I want NinjaTrader to behave like Tradovate. When I hover over a candlestick, the cursor should automatically snap to the center of that candle across all open charts. For example, when I hover over a 30-minute candle, the cursor should align with the center of the corresponding candles on the 15-minute and other chart timeframes. I also want vertical lines drawn on one chart to automatically align with the center of
Hello, I already have an MT5 Expert Advisor for XAUUSD based on Fibonacci, market structure, BOS/CHoCH and swing trading. I need an experienced MQL5 developer to modify my existing EA, not develop a completely new one. Required modifications: Partial take-profit system with multiple TP levels. Keep profit targets conservative, using Fibonacci extension levels. Stop-loss placement beyond liquidity areas, not exactly
Hello, I am an independent developer selling an Expert Advisor (EA) on the MQL5 Market. I am looking for an experienced Forex affiliate marketing company or professional marketer to promote my existing MT5 trading robot to customers worldwide. My proposed partnership offers a 35% commission per verified sale, with the possibility of a long-term collaboration. I would like to know: Do you promote third-party MT5
The objective is to develop a custom technical indicator for MetaTrader 5 (MQL5) that replicates the exact visual structure, inputs, and features of the "AYN-Indicator by Snurk" as shown in the provided screenshot. The indicator must analyze price actions based on a flexible lookback period, plot dynamic trend filters, and render precise Buy/Sell breakout labels without any lagging or repainting
Requirements Specification: Debug & Error Fixing: Review the entire source code of the MQL expert advisor. Identify and fix all logical errors, bugs, and performance issues that cause trades to close prematurely or yield extremely low profits. Strategy Restructuring & Optimization: Fully analyze and optimize the current entry and exit strategy for USDJPY and GBPUSD. Modify, upgrade, or completely rewrite the entry
Winter 500+ USD
I am looking for an MQL5 developer to independently review an existing EA’s execution and position management logic. The review should focus on duplicate orders, trade isolation by symbol and magic number, broker price and volume constraints, error handling, and recovery after a terminal restart. This order is for an audit report. Please do not modify the source or change the trading strategy. For each finding
Title: Fully Automatic MT5 Trading Bot (Expert Advisor) with Risk Management I want a fully automated trading robot (Expert Advisor) for MetaTrader 5, written in MQL5. The bot must automatically analyse market data, identify trading opportunities, execute BUY and SELL orders, manage open positions, and close trades according to predefined rules without requiring manual confirmation for each trade. Requirements
The Traffic Rush 250 - 500 USD
Subject: Inquiry: MQL4 Optimization & Refinement for Proprietary Binary Suite (Pine-to-MT4) I am seeking an experienced MQL4 / MetaTrader developer to optimize and finalize a custom binary options trading suite. Project Summary Core Architecture: Multi-pair Regime Scanner (22-pair FX basket monitoring state/score) and a Signal Engine operating on M1 charts. Strategy Sequence: Pre-Alert Dot: Placed on a candle closing
Hello I want some that can help with my strategy signal I have the video that you are going to watch if you know you can help me with kindly do well to bid and let discussed it an urgent project and also if you can not work before you get paid please don bid thanks

项目信息

预算
50 - 100 USD
截止日期
从 3 到 7 天