I would like to write some of my suggestions for your concept.
1.) Can we see coloring options for the clusters as seen on the picture? Your Cluster width visualasation will be more powerfull with
the coloring options
2.) Can we see bar bracket coloring? Bull or bear coloring...
3.) if it is possible can we see total volume profile with dynamic poc lines?
I would like to write some of my suggestions for your concept.
1.) Can we see coloring options for the clusters as seen on the picture? Your Cluster width visualasation will be more powerfull
with the coloring options
2.) Can we see bar bracket coloring? Bull or bear coloring...
3.) if it is possible can we see total volume profile with dynamic poc lines?
Rgrds
Hello.
I understand your wishes.
I will think about it, but right now I cannot promise that it will be soon.
Hello I have bought your product.Forgive my ignorance.
Why doesn't it work on the weekends?The weekend is when we have more time to learn about the indicator as well as how to analyze the markets.
Today, January 2, 2021, I don't see it working.I drag it to the chart but it doesn't load.
Thank you.M. Dorta.
Hello.
Thank you for your purchase.
The indicator does not contain any restrictions for working on weekends (or non-trading days).
I just checked on my own - the market is not working now, but the indicator is working fine.
However, if you run the terminal offline (without the internet), then I recommend that you still connect the internet, and then click through all the timeframes from smaller to larger, that is, from M1 to MN.
After this procedure, I think the indicator will run on the offline terminal as well.
Also, there are two options when the indicator does not work:
1. The indicator cannot be installed on the chart. When we drag the indicator to the chart (or double-click) and nothing happens, we need to make sure that the indicator is actually set to the chart. Just need to select the terminal menu Charts -> Indicators list, then a new small window will open, and in this window there will be a list of indicators that are installed on this chart. And our indicator should be present in this list. If the indicator is not in the list, then only the Service Desk can help you, since such situations are only in their competence.
2. The indicator is normally installed on the chart, and the indicator appears in the list of indicators in the window Charts -> Indicators list, but the indicator does not draw anything. In this case, the user should contact the author of the indicator, that is, me.
Now you have to tell me, what exactly is your situation, the first or the second ?
The indicator does not contain any restrictions for working on weekends (or non-trading days).
I just checked on my own - the market is not working now, but the indicator is working fine.
However, if you run the terminal offline (without the internet), then I recommend that you still connect the internet, and then click through all the timeframes from smaller to larger, that is, from M1 to MN.
After this procedure, I think the indicator will run on the offline terminal as well.
Also, there are two options when the indicator does not work:
1. The indicator cannot be installed on the chart. When we drag the indicator to the chart (or double-click) and nothing happens, we need to make sure that the indicator is actually set to the chart. Just need to select the terminal menu Charts -> Indicators list, then a new small window will open, and in this window there will be a list of indicators that are installed on this chart. And our indicator should be present in this list. If the indicator is not in the list, then only the Service Desk can help you, since such situations are only in their competence.
2. The indicator is normally installed on the chart, and the indicator appears in the list of indicators in the window Charts -> Indicators list, but the indicator does not draw anything. In this case, the user should contact the author of the indicator, that is, me.
Now you have to tell me, what exactly is your situation, the first or the second ?
Hello,Thanks for answering.
in this case my problem would be in option 1. That is, whether I drag the indicator to the chart, or double-click it, the indicator does not appear on the chart.
I bought your indicator along with several others on the same day and they all worked while there was a real market.However, Christmas days arrived and they all stopped working.
Today one of them has sent me an update of the indicator, in which we have fixed a detail of that indicator and with the update it already works correctly.
Can I reinstall it from the MQL5 website to see if it works like this, or is it better to contact Service Desk?
in this case my problem would be in option 1. That is, whether I drag the indicator to the chart, or double-click it, the indicator does not appear on the chart.
I bought your indicator along with several others on the same day and they all worked while there was a real market.However, Christmas days arrived and they all stopped working.
Today one of them has sent me an update of the indicator, in which we have fixed a detail of that indicator and with the update it already works correctly.
Can I reinstall it from the MQL5 website to see if it works like this, or is it better to contact Service Desk?
Thanks a lot.
M. Dorta
Yes, you can try to reinstall the indicator, either from the indicator page, or directly through the terminal (via the "Market" tab).
If both methods do not help, then you should contact the Service Desk.
I definitely had to reinstall the indicator.An activation has been taken from me.I am already discussing the reason why an activation is removed if the device PC is the same.
However and more importantly, the indicator is already working correctly on my MT4 platform.
I definitely had to reinstall the indicator.An activation has been taken from me.I am already discussing the reason why an activation is removed if the device PC is the same.
However and more importantly, the indicator is already working correctly on my MT4 platform.
Thanks for your attention.
Regards,
M. Dorta.
Hello.
In any case, all questions that relate to licensing, the user can only ask to the Service Desk.
I would be happy to help, but I can't, and I don't have the necessary authority.
jmhuang: kindly open attachment - my cluster chart have no numbers for the orders? what should i do to have that displayed?
Hello.
The fact is that the numbers have a certain size (font size) vertically, which is determined in monitor pixels, and this size can also be set using the input variables ClustersFontSize or ProfilesFontSize.
The clusters thickness (the step along the price axis) is set by the indicator automatically, or manually using the StepPoint input variable, and depending on the scope of the chart window, the clusters thickness also has a certain size in monitor pixels.
As a result, if the clusters thickness is less than the font size (with some margin), then the numbers on the clusters are simply not displayed automatically.
Can you kindly clarify some things, to help us get the best out of it? As follows:
1) Is there a user manual? This would be really helpful.
2) What do the displayed figures represent? I suspected it would be the number of higher price ticks (blue), the number of lower price ticks (red), and the total higher minus the total lower (Frames Delta). However my testing with a tick counter tells me that it is not this simple.
3) What should FramesCompare do when enabled? I tried it but cannot see any difference.
Can you kindly clarify some things, to help us get the best out of it? As follows:
1) Is there a user manual? This would be really helpful.
2) What do the displayed figures represent? I suspected it would be the number of higher price ticks (blue), the number of lower price ticks (red), and the total higher minus the total lower (Frames Delta). However my testing with a tick counter tells me that it is not this simple.
3) What should FramesCompare do when enabled? I tried it but cannot see any difference.
Many thanks.
Hello.
1. There are no additional instructions other than the description on the input variables on the indicator page anymore. It's just that this indicator is, in a sense, an ordinary cluster indicator.
2. The number on the cluster indicates the numerical value of the volume in this cluster. The size of the cluster volume depends on the time interval, as well as on the thickness of the cluster in points. It's a bit difficult to calculate manually.))
3. The function FramesCompare normalizes the visual length of all clusters located in the viewing area of the graph window relative to the volume of the most filled cluster. There are differences there, you just probably didn't notice them.))
Hello Evgeny,
I purchased this tool half an hour ago. But nothing shows up. Should i wait for a while or any special adjustment to do with my mt4 terminal?
Rgrds,
Hello Evgeny,
I purchased this tool half an hour ago. But nothing shows up. Should i wait for a while or any special adjustment to do with my mt4 terminal?
Rgrds,
Hello.
Thank you for your purchase.
Try pressing the "+" button on the terminal several times.
As a result, the candles chart should turn into a cluster chart (see the tab "What is new" for version 1.8).
Anyway, let me know.
Hello.
Thank you for your purchase.
Try pressing the "+" button on the terminal several times.
As a result, the candles chart should turn into a cluster chart (see the tab "What is new" for version 1.8).
Anyway, let me know.
Thank you :))
Hello Evgeny,
I would like to write some of my suggestions for your concept.
1.) Can we see coloring options for the clusters as seen on the picture? Your Cluster width visualasation will be more powerfull with the coloring options
2.) Can we see bar bracket coloring? Bull or bear coloring...
3.) if it is possible can we see total volume profile with dynamic poc lines?
Rgrds
Hello Evgeny,
I would like to write some of my suggestions for your concept.
1.) Can we see coloring options for the clusters as seen on the picture? Your Cluster width visualasation will be more powerfull with the coloring options
2.) Can we see bar bracket coloring? Bull or bear coloring...
3.) if it is possible can we see total volume profile with dynamic poc lines?
Rgrds
Hello.
I understand your wishes.
I will think about it, but right now I cannot promise that it will be soon.
Hello.
I understand your wishes.
I will think about it, but right now I cannot promise that it will be soon.
Hi,
Nice to hear about it. Thank you so much.
Good luck.
Rgrds,
SIR, is it possible to highlight Low volume node in the profile?
Hello.
To be honest, I don't understand your question.
Write in more detail what you mean (may need to attach sketches).
Hello I have bought your product. Forgive my ignorance.
Why doesn't it work on the weekends? The weekend is when we have more time to learn about the indicator as well as how to analyze the markets.
Today, January 2, 2021, I don't see it working. I drag it to the chart but it doesn't load.
Thank you. M. Dorta.
Hello I have bought your product. Forgive my ignorance.
Why doesn't it work on the weekends? The weekend is when we have more time to learn about the indicator as well as how to analyze the markets.
Today, January 2, 2021, I don't see it working. I drag it to the chart but it doesn't load.
Thank you. M. Dorta.
Hello.
Thank you for your purchase.
The indicator does not contain any restrictions for working on weekends (or non-trading days).
I just checked on my own - the market is not working now, but the indicator is working fine.
However, if you run the terminal offline (without the internet), then I recommend that you still connect the internet, and then click through all the timeframes from smaller to larger, that is, from M1 to MN.
After this procedure, I think the indicator will run on the offline terminal as well.
Also, there are two options when the indicator does not work:
1. The indicator cannot be installed on the chart. When we drag the indicator to the chart (or double-click) and nothing happens, we need to make sure that the indicator is actually set to the chart. Just need to select the terminal menu Charts -> Indicators list, then a new small window will open, and in this window there will be a list of indicators that are installed on this chart. And our indicator should be present in this list. If the indicator is not in the list, then only the Service Desk can help you, since such situations are only in their competence.
2. The indicator is normally installed on the chart, and the indicator appears in the list of indicators in the window Charts -> Indicators list, but the indicator does not draw anything. In this case, the user should contact the author of the indicator, that is, me.
Now you have to tell me, what exactly is your situation, the first or the second ?
Hello.
Thank you for your purchase.
The indicator does not contain any restrictions for working on weekends (or non-trading days).
I just checked on my own - the market is not working now, but the indicator is working fine.
However, if you run the terminal offline (without the internet), then I recommend that you still connect the internet, and then click through all the timeframes from smaller to larger, that is, from M1 to MN.
After this procedure, I think the indicator will run on the offline terminal as well.
Also, there are two options when the indicator does not work:
1. The indicator cannot be installed on the chart. When we drag the indicator to the chart (or double-click) and nothing happens, we need to make sure that the indicator is actually set to the chart. Just need to select the terminal menu Charts -> Indicators list, then a new small window will open, and in this window there will be a list of indicators that are installed on this chart. And our indicator should be present in this list. If the indicator is not in the list, then only the Service Desk can help you, since such situations are only in their competence.
2. The indicator is normally installed on the chart, and the indicator appears in the list of indicators in the window Charts -> Indicators list, but the indicator does not draw anything. In this case, the user should contact the author of the indicator, that is, me.
Now you have to tell me, what exactly is your situation, the first or the second ?
Hello, Thanks for answering.
in this case my problem would be in option 1. That is, whether I drag the indicator to the chart, or double-click it, the indicator does not appear on the chart.
I bought your indicator along with several others on the same day and they all worked while there was a real market. However, Christmas days arrived and they all stopped working.
Today one of them has sent me an update of the indicator, in which we have fixed a detail of that indicator and with the update it already works correctly.
Can I reinstall it from the MQL5 website to see if it works like this, or is it better to contact Service Desk?
Thanks a lot.
M. Dorta
Hello, Thanks for answering.
in this case my problem would be in option 1. That is, whether I drag the indicator to the chart, or double-click it, the indicator does not appear on the chart.
I bought your indicator along with several others on the same day and they all worked while there was a real market. However, Christmas days arrived and they all stopped working.
Today one of them has sent me an update of the indicator, in which we have fixed a detail of that indicator and with the update it already works correctly.
Can I reinstall it from the MQL5 website to see if it works like this, or is it better to contact Service Desk?
Thanks a lot.
M. Dorta
Yes, you can try to reinstall the indicator, either from the indicator page, or directly through the terminal (via the "Market" tab).
If both methods do not help, then you should contact the Service Desk.
Yes, you can try to reinstall the indicator, either from the indicator page, or directly through the terminal (via the "Market" tab).
If both methods do not help, then you should contact the Service Desk.
OK thank you very much. I will do so. I'll keep you informed.
Regards.
Hello,
I definitely had to reinstall the indicator. An activation has been taken from me. I am already discussing the reason why an activation is removed if the device PC is the same.
However and more importantly, the indicator is already working correctly on my MT4 platform.
Thanks for your attention.
Regards,
M. Dorta.
Hello,
I definitely had to reinstall the indicator. An activation has been taken from me. I am already discussing the reason why an activation is removed if the device PC is the same.
However and more importantly, the indicator is already working correctly on my MT4 platform.
Thanks for your attention.
Regards,
M. Dorta.
Hello.
In any case, all questions that relate to licensing, the user can only ask to the Service Desk.
I would be happy to help, but I can't, and I don't have the necessary authority.
kindly open attachment - my cluster chart have no numbers for the orders? what should i do to have that displayed?
Hello.
The fact is that the numbers have a certain size (font size) vertically, which is determined in monitor pixels, and this size can also be set using the input variables ClustersFontSize or ProfilesFontSize.
The clusters thickness (the step along the price axis) is set by the indicator automatically, or manually using the StepPoint input variable, and depending on the scope of the chart window, the clusters thickness also has a certain size in monitor pixels.
As a result, if the clusters thickness is less than the font size (with some margin), then the numbers on the clusters are simply not displayed automatically.
Great indicator, congratulations!
Can you kindly clarify some things, to help us get the best out of it? As follows:
1) Is there a user manual? This would be really helpful.
2) What do the displayed figures represent? I suspected it would be the number of higher price ticks (blue), the number of lower price ticks (red), and the total higher minus the total lower (Frames Delta). However my testing with a tick counter tells me that it is not this simple.
3) What should FramesCompare do when enabled? I tried it but cannot see any difference.
Many thanks.
Great indicator, congratulations!
Can you kindly clarify some things, to help us get the best out of it? As follows:
1) Is there a user manual? This would be really helpful.
2) What do the displayed figures represent? I suspected it would be the number of higher price ticks (blue), the number of lower price ticks (red), and the total higher minus the total lower (Frames Delta). However my testing with a tick counter tells me that it is not this simple.
3) What should FramesCompare do when enabled? I tried it but cannot see any difference.
Many thanks.
Hello.
1. There are no additional instructions other than the description on the input variables on the indicator page anymore. It's just that this indicator is, in a sense, an ordinary cluster indicator.
2. The number on the cluster indicates the numerical value of the volume in this cluster. The size of the cluster volume depends on the time interval, as well as on the thickness of the cluster in points. It's a bit difficult to calculate manually.))
3. The function FramesCompare normalizes the visual length of all clusters located in the viewing area of the graph window relative to the volume of the most filled cluster. There are differences there, you just probably didn't notice them.))