프리랜스섹션

Indicator show wrong value when Running Tester but show correct if attach to chart

MQL4 지표

작업 종료됨

실행 시간 1 일
피고용인의 피드백
Very pleased to work with. He was informative and understood developer's demonstration quickly.

명시

Hello,

So I create 1 indicators (WWW_NOTSURE) that build on few others.

They are all in the same timeframe and based on break HighLow.

In my last indicator(WWW_NOTSURE) , when I have the condition in the second IF, I have issue when run the Indicator Tester!

Some dot show up even though the condition is violate. You can see in the picture attached.

 

One thing is: if I simply attach the indicator to chart, this error arrows is not show up.

I try it in multiple platform and this problem persist.

 

Can you help me with correcting the problem. I worry that when I run it to trade, wrong arrow will show up as in the Indicator Tester?

 I want to keep using all indicators as they are, not combining indicator together.


Thank you

 

 

   if(break_below(i)!=EMPTY_VALUE)
   {  if((up_series_3(i)==1 && up_series_1(i)==0 && up_series_2(i)==0) || (up_series_3(i)==0 && up_series_1(i)==0 && up_series_2(i)==0))
      {  
         {  sell_on_3only[i]=-30;
         }
      }
   }

 


파일:

PNG
Chart.png
225.2 Kb
PNG
When_attach_to_chart.png
299.2 Kb
MQ4
H_breakrange_Close_onchart.mq4
3.4 Kb
MQ4
H_breakrange_count.mq4
11.0 Kb
MQ4
H_breakrange_count_Multiple_window_2setparameter.mq4
13.5 Kb
MQ4
www_notsure.mq4
7.6 Kb
MQ4
H_breakrange_HL_onchart.mq4
3.3 Kb

응답함

1
개발자 1
등급
(1305)
프로젝트
1735
49%
중재
55
67% / 16%
기한 초과
38
2%
무료
2
개발자 2
등급
(251)
프로젝트
400
54%
중재
9
67% / 22%
기한 초과
36
9%
무료
게재됨: 2 코드
3
개발자 3
등급
(2)
프로젝트
2
0%
중재
2
0% / 100%
기한 초과
0
무료
4
개발자 4
등급
(188)
프로젝트
212
58%
중재
9
11% / 89%
기한 초과
8
4%
무료
5
개발자 5
등급
(188)
프로젝트
263
70%
중재
12
33% / 67%
기한 초과
16
6%
무료
게재됨: 993 코드
비슷한 주문
Need help with modification of Ninjatrader indicator 30+ USD
i have indicator for Trading View, also copy for NT, i need someone to improve and check the NT version (indicator is simple is volume density koncept)…. when i put same settings on TV version and NT version i have diffrerent results, but this can be because diffrent market data or fact that TV sending tick info in blocks , not tick by tick like NT8 on both. I(ndicator base on counting volume) so besied that is it
HELP WITH REMOVING A BUG/INFINITE LOOP FROM A CUSTOM INDICATOR 30 - 50 USD
Please may someone assist me with the indicator attached, it has a SERIOUS BUG issue in the sense that when I load it, and activate the template (attached as well) MT4 ALWAYS freezes and then eventually disconnects automatically, ALL THE TIME. It even gets worse to an extent that after disconnecting a number of times mt4 ends up not loading anymore, UNTIL I remove the indicator. Please I WILL NEED A DEMO (FOR A DAY)
4 candles reversal strategy, 2 trending candle with 2 reversal candle 30+ USD
‎A trending candle followed by a smaller trending candle which is the second candle with no 5EMA ‎ ‎The 3rd candle is a reversal candle in which it and it's immidiate previous candle must be at least 70% of each other's body or equal body, with no 5EMA touch ‎ ‎the 3rd candle candle is followed immediately by the 4th candle which is the signal candle in which it and the 1st cabdle must be also at least 70% of
LynxMT5algo 30 - 100 USD
An mt5 add on indicator like gainalgo style to show entrance and exit areas for gold silver and Btc scalping. It will be used to make trading more easy for beginners
Simple Added Notice For Existing Indicator 50 - 200 USD
I have the Fisher Indicator shown below the chart. I need an alert added for when the Fisher Indicator hits the 50 point at the end of each period. GBPUSD and EURUSD 4H charts are provided and I can provide additional
I have a trading strategy that I would like coded and automated in Pine Script for TradingView. 30+ USD
Hello here, I need someone who can work on pinescript and also with Renko charts. My entries for my strategy would be based on stop orders Kindly let me know if you can work on this for me and i will send necessary file and quote in the chat
EA Recovery Layer 30+ USD
Freelance Task — EA Recovery Layer Hello. I have a ready-made MQL5 EA. The signals, SL/TP and lot calculation should essentially not be touched. I need a recovery system added. I am not a programmer — below is how the robot should behave. What stays Entry only from an EA signal. Stop-loss is not a new signal. Trailing is already built into my EA — recovery does not implement its own trailing. If trailing is disabled
Snrz auto tdrade bot with evry detail work in time frame 1m-4h 100+ USD
# SNRZ BOT — SESSION PROGRESS LOG Last updated: 2026-09-16 (local late-evening session) ## SAN BOT (new — cloned from SNRZ) - `MQL5\Experts\AutomatedOrderBot_SAN.mq5` / `.ex5` — v1.0, compiled 0 errors/0 warnings - Signal source: custom indicator "SAN" (InpSANName, buy buf 0 / sell buf 1, target bar 1), same SNRZ-style read, MA fallback if missing - Magic number 234567 (separate from SNRZ 123456 so both bots can run
I need a Pine Script converted to NinjaScript 30+ USD
Should be as it but no alarms, also we need to add a deep search so he can see all the preves candles and a memory function so its not slowing down the indicator. for higher time frames daily 4h 1h around 365 days and for lower time frames we do up to 20k bars but both flexible so i can change it later. the memory is important so the indicator is not always recalculating everything when a new candle shows especially
Ninjatrader automated strategy development 30+ USD
Hi, I need an experienced NinjaTrader 8/NinjaScript developer to finish or rebuild an automated futures strategy, ideally by the end of this week. I already have the complete TradingView Pine Script reference strategy, an existing ~2,000-line NinjaScript implementation, Playback logs, and known historical benchmark trades. MOST IMPORTANT REQUIREMENT: TRADINGVIEW ↔ NINJATRADER PARITY. The Pine Script is the reference

프로젝트 정보

예산
30 - 60 USD
기한
에서 1 로 2 일