작업 종료됨
실행 시간 1 일
피고용인의 피드백
Great Client , thanks ! hope to work with you again
고객의 피드백
Excellent Job. All the work was done professionally and on time. Highly recommended! :-)
명시
1) Triggers market buy orders and market sell orders based on the Stochastic Oscillator.
- When a Main Line Crosses Above Signal line and candle closes, trigger a market buy order
- After the trade has been triggered, EA will add TP points to the buy entry price and feed in the take profit level. Or EA will subtract TP points to the sell entry price and feed in the take profit level.
- When a Main Line Crosses Below Signal line and candle closes, trigger a market sell order
- After the trade has been triggered, EA will add TP points to the buy entry price and feed in the take profit level. Or EA will subtract TP points to the sell entry price and feed in the take profit level.
* Note - Changing the settings should not trigger a trade
* Note - Changing the timeframe should not trigger a trade
2) Uses a Main Trade / Counter Trade system instead of a stop loss
- When there are no active trades, the first trade placed is going to be a MT trade.
- If this trade exits with profit the next trade is again going to be a MT and this will keep going on.
- If the MT is Active, and a new signal is generated, this is going to be a CT (Counter Trade).
- The CT will be larger in size. The size will be automatically calculated by the EA (Formula given below)
- If the CT profit is $40 and the MT loss is smaller for example $35, EA will close the MT when the CT closes with profit.
- If the CT profit is $40 and the MT loss is larger for example $52, EA will partially close lots of MT when the CT closes... just enough to off set the $40 profit. Never more than this $40 profit.
- EA will then place another CT trade and adjust its profit against losses of an MT trade.
- EA will also place CT trades to adjust losses of other active CT trades.
- Once all MT and CT trades are closed, the EA will go back and start placing MT trades.
3) Here is what the Inputs Section will look like:
%K = 5
%D = 3
Slowing = 3
Field = Low/High
Method = Simple / Exponential etc...
=================
Trade MT = True/False
(If i turn this to false, then it will not place anymore MT trades. It will continue to place CT trades if needed)
=================
MT Trade Size = 0.05 lots (Main Trade Size)
MT Take Profit = 50 points (Main Trade Take Profit)
CT Take Profit = 50 points (Counter Trade Take Profit)
CT Margin = $5.00 ($X)
=================
(When a trade is triggered, these comments will be shown in the terminal)
Stochastic MT Buy Comment = "xxxx"
Stochastic MT Sell Comment = "xxxx"
Stochastic CT Buy Comment = "xxxx"
Stochastic CT Sell Comment = "xxxx"
=================
Filters Needed:
Start Trading Time: 00:45
End Trading Time: 22:00
Maximum Active Buy lots = 5.00 (Explaination given in point 4 below)
Maximum Active Sell lots = 5.00 (Explaination given in point 5 below)
Maximum Spread = 25 points (if the spread is larger than 25 points the EA will not trigger a trade even if there is a valid signal and arrow)
=================
Magic #: xxxxxxxx
Spread: 20
=================
Example:
- IF closing price is 2625.40 and the main line is above the signal line
- Generate & Display Buy arrow on the main chart
- Trigger market buy order MT = 0.05 lots at 2625.40
- Due to slippage, the market buy order might trigger at 2625.46
- Now it will place a TP of 50 points = 2625.96 into the system
- Vice versa for sell orders.
- If the 2nd, 3rd, 4th and so candles also has a main line that is above the signal line - No Arrow will be triggered and No order will be placed.
- IF the price drops to 2621.80 and a sell arrow is generated, EA will trigger a CT Sell order with TP points given in the settings = 50 points
- It must now Automatically calculate Loss being made on the MT buy order.
- The EA sees that the exit point of the CT order is going to be at 2621.80-0.50 = 2621.30
- The EA calculates the loss of this MT trade using the exit price of the CT order
(2625.46 - 2621.30) x 100 x 0.05 lots = $20.80 loss on MT order
- EA then adds the CT Margin of $5 which gives us the total profit needed on CT order =
$20.80 + $5 = $25.80
- Since the CT take profit = 50 points, ($25.80 / 50) = 0.516 lots needs to be placed. Therefore the CT Size is going to 0.52 lots
The Formula to Automatically Calculate CT Size:
For CT Buy orders
[{(Exit price of CT trade - Entry price of Loss making trade) x 100 x Size of Loss making trade} + CT Margin]/CT Take Profit]
For CT Sell orders
[{(Entry price of Loss making trade - Exit price of CT trade) x 100 x Size of Loss making trade} + CT Margin]/CT Take Profit]
**A CT TRADE Will Always Calculate Loss Of the First Active Loss Making Trade! Here is another example to clarify**
- MT Buy order is placed at 2650.00
- Price moves down to 2640.00
- New sell signal is generated. CT trade calculates loss of MT buy trade placed at 2650.00
- Price moves up to 2645.00 (Both the MT & CT trades are active)
- A New buy signal is generated. CT trade calculates loss of MT trade placed at 2650.00
When the MT trace has been closed, we only have a Sell CT trade active at 2640.00
- New sell signal is generated. CT trade calculates loss of CT Sell trade placed at 2640.00 and so on...
4) Maximum Active Buy lots = 5.00
If there is a active buy MT of 0.25 lots
A new buy needs to be placed of 6.50, the EA will place a maximum of 5 active lots so it will place 4.75 lots instead of not placing any trade at all.
5) Maximum Active Sell lots = 5.00
If there is a active sell MT of 1.50 lots
A new buy needs to be placed of 14.10, the EA will place a maximum of 5 active lots so it will place 3.50 lots instead of not placing any trade at all.
*The EA has to trigger recovery trades to eliminate other recovery trades as well.*
*All recovery trades must attempt to close the active trade that was placed FIRST!*
응답함
1
등급
프로젝트
183
25%
중재
24
17%
/
75%
기한 초과
16
9%
무료
2
등급
프로젝트
403
28%
중재
40
40%
/
50%
기한 초과
1
0%
무료
3
등급
프로젝트
46
24%
중재
34
9%
/
85%
기한 초과
10
22%
무료
4
등급
프로젝트
22
18%
중재
8
38%
/
38%
기한 초과
3
14%
로드됨
게재됨: 1 코드
5
등급
프로젝트
1
0%
중재
1
0%
/
100%
기한 초과
0
무료
6
등급
프로젝트
11
0%
중재
8
25%
/
75%
기한 초과
2
18%
무료
7
등급
프로젝트
105
60%
중재
0
기한 초과
0
무료
8
등급
프로젝트
35
20%
중재
5
40%
/
40%
기한 초과
0
무료
게재됨: 1 코드
9
등급
프로젝트
0
0%
중재
0
기한 초과
0
무료
10
등급
프로젝트
491
75%
중재
6
67%
/
17%
기한 초과
0
무료
11
등급
프로젝트
272
21%
중재
24
54%
/
17%
기한 초과
0
무료
12
등급
프로젝트
0
0%
중재
0
기한 초과
0
무료
게재됨: 1 코드
13
등급
프로젝트
0
0%
중재
0
기한 초과
0
무료
비슷한 주문
Project Description I am looking for an experienced MQL5/MT5 Expert Advisor developer to develop an automated trading EA for XAUUSD on the M3 timeframe , running on an Exness account . The EA will automate a manual strategy based on SNR/GAP zones , using two setup types: Price Rejection Price Correction The EA should identify valid BUY/SELL setups around predefined SNR/GAP areas, apply configurable RSI, SMA, EMA and
I need an MT5 Expert Advisor for XAUUSD (Gold) running on an Exness account. STRATEGY LOGIC The exact entry and exit rules will be provided in writing before development starts. Please quote for a single rule-based strategy with clearly separated logic, so the rules can be adjusted later without rewriting the whole EA. RISK MANAGEMENT (this is the priority of the project) - Risk per trade as a percentage of account
Modification of Trade_Panel_7 7.05 Objective . I have this utility “Trade_Panel_7 7.05” with which I open and close positions. Please refer to attached “Trade Panel Modification.jpg”. It shows an input parameter “Volume Step”. This parameter has the initial value of 0.02 as shown. This feature needs to be amended. Present Status . Value of lot size is increased by this “Volume Step”. I have built a whole series of
Hello Traders, Have a trading strategy or idea you want to automate? I specialize exclusively in MQL5 development, helping traders turn their concepts into professional trading solutions. Custom Expert Advisors — automate your strategy and reduce manual execution Custom Indicators — transform your market ideas into powerful trading tools Fix & Debug — identify errors and get your existing code working properly
please share: Strategy description — entry/exit rules, indicators used, timeframe(s), and instrument(s) (a written explanation, screenshots, or an existing indicator/EA to reference all work) Risk management rules — position sizing method (fixed lot / % risk), stop loss / take profit logic, max drawdown or daily loss limits, and whether martingale/grid/hedging is involved Broker & account details — broker name
GRID/DCA EA for XAUUSD Trading needed
50 - 100 USD
I need a unique grid trading system for XAUUSD that combines entry, controlled two-sided grid expansion, DCA (Dollar Cost Averaging) basket profit control, hedging. Unlike traditional grid EAs that only trade against price, this unique grid system should dynamically build positions in both directions based on market movement, allowing flexible adaptation to changing conditions ie the grid needs to dynamically move
I need an experienced MQL5 developer to create a fully automated MT5 Expert Advisor called Ayoub Gold EA , focused exclusively on XAUUSD (Gold) . Main requirements: Platform: MT5 / MQL5. Fully automated BUY and SELL trading on XAUUSD. Must support broker suffixes such as XAUUSD, XAUUSD.f and XAUUSDm. Trading strategy based mainly on Range Breakout with trend confirmation. EMA, ADX and ATR filters. London/New York
Mashiri
50 - 10000 USD
I need a custom MetaTrader 5 indicator designed specifically for XAUUSD gold trading. The indicator should identify potential buy and sell opportunities, display clear entry and exit signals on the chart, provide alerts, and help identify market trends and possible reversals
Looking for an experienced Sierra Chart ACSIL/C++ developer to customize an existing footprint chart. I need 3 things: 7-Day ATR – calculate and display a configurable 7-day ATR. Custom Footprint – modify my existing footprint chart to match my preferred layout/data display. Automatic LVN – detect and plot Low Volume Nodes automatically based on volume distribution. I already have a working footprint chart, so no
V3 PRO Auto-Scalper EA
40+ USD
//———————————————————————————————————————————————————————————————————— struct S_MCAV { double matureSum; double totalSum; double value; void Init () { matureSum = 0.0; totalSum = 0.0; value = 0.5; } void AddContext (int ctx) { totalSum += 1.0; if (ctx == 1) matureSum += 1.0; } void ApplyDecay (double rate) { matureSum *= rate; totalSum *= rate; } void Update () {
프로젝트 정보
예산
50+ USD
기한
에서 1 로 2 일