A bollinger bands pattern scanner + EA based on the arrows detected from the indicator

MQL4 지표 전문가

작업 종료됨

실행 시간 21 일
고객의 피드백
excellent work , extremely talented , very quick and always available to respond to communications.
피고용인의 피드백
very good and observative user

명시

Before anything the whole project revolves around the following 
-candles patterns
-scanner indicator and a trading robot
-alerts linked to arrows (up\down)
-filters which can be applied to either the alerts, indicator’s dashboard, or trading robot.
Filters such as: candle size, skip nearing pattern filter,
___________________________________________________________________________________________
-The first step is to code and indicator that could detect all cases in file (all patterns) with attention to doji candles and divergence doji candles
1-two candle formation ,bullish candle that open between middle and upper bollinger band but close outside the upper band followed by a bearish candle that open outside the upper band then close(inside) between upper and middle band
2-the complete opposite of pattern 1, bearish candle that open between middle and lower bollinger band but close outside the lower band followed by a bulish candle that open outside the lower band but close inside (between lower and middle band)
3-bullish (candles that open and close completely outside the upper band)
4-bullish (candles that open and close completely outside the lower band)
5-bearish (candles that open and close completely outside the upper band)
6-bearish (candles that open and close completely outside the lower band)
7-doji (bullish\bearish) candles that open and close outside (lower\upper band),note:candle wicks isn't relevant,and when candle size is applied these candles should be skipped
8-candles (usually small doji ones bullish or bearish on upper or lower band)but they open and close on the bollinger line review image 7,8,9,10 in (all patterns photo)
9-consecutive candles (bullish\bearish) (2,3,4,5,6) that break the bollinger with adjustable value in the setttings to be highlighted on the chart with and two opposing symbols you desire for bearish and bullish.
note:upper line is arrow down\sell signal
------- lower line is arrow up\buy signal
10-two candle formation similar to pattern  1 and 2 but the second candle is not necessarily opened outside the (upper/lower) band ,but rather close enough(opened and closed) to previous candle near (upper/lower band) (review photo 29)

Case 11,12:is when consecutive candles pierce (lower\upper)bollinger line,with consecutive variable before detection input available ,example ,I want to highlight number(could be 2,3,4,5 of consecutive  candles ,so that input should be vailable in the indicator and expert settings
Important note: please let me know if you could code the above mentioned patterns in the case of these patterns approaching the lower or upper bollinger line but without the other conditions being met ,example case 1+2 but regardless of opening and close outside or inside the (upper\lower) bollinger line ,same concept for divergence and doji candles ,and in that case we’d have extra other 12 patterns.
-No need to present the cases based on their category 12345678 just a simple red or green arrows
Dashboard should always present the number of arrow up cases, arrow down cases ,and the current detected cases dedicated for the alert review DB 1 photo
the dashboard is dedicated for showing how many cases up and down over a long extended period of time, previous (days,weeks,or number of candles)
Dashboard options, show only arrows down, show only arrows up, every time or number of candles
-Candle size filter is needed
-There should be (include\exclude) feature in the indicator\trading robot settings for every pattern mentioned above
Example :only detect and count bearish doji arrows (review all patterns)picture
Note: some doji cases are close to the upper or lower Bollinger line but still doesn’t fall under any of the 12 cases ,also I want the robot to detect divergence candles outside the Bollinger even if they’re doji candles, if you don’t know what I’m talking about you can ask me for a picture .
arrow up cases with green arrow up graph on the chart
arrow down cases with red arrow down graph on the chart
______________________________________________________________________________________________________
alert section: the alert is supposed to take in consideration ,(time,cases detected up\down)
the alert should be conditional ,if N=number of arrows
-N of arrows up detected
-N of arrows down detected
-N of arrows up+down detected but last detected is down
-N of arrows up+down detected but last detected one is up
-N of arrows up+down detected regardless of last detected case being up or down Counter of the alert started after the previous reset ,example an alert goes after detecting 13 cases up then reset to zero in the dashboard and the chart should highlight where the alert went on the last pattern that triggered the alert
-an alert whenever two or three or four consecutive candles appear on the chart (candle size filter applied)on any the chosen candle period (hours ,days)on\off feature
***note:the dashboard should always present the overall number of arrows up and arrows down from the chart
***note: the chart should always show arows (green or red) even if the alert is off on that case
and the location on which recent case the alert occurred when the alert was triggered 
Candle size filter, to choose the size of the candle that fits the above description to be considered for indicator calculation, for example only candles that are >20 pip or > 40 pips
first step is to design an indicator that could detect and highlight the 12 cases mentioned in the post
-----------------------------------------------------------------------------------------------
on the chart i want the bearish cases highlighted in red arrows above the candles and green arrows below
the bullish cases, as for the last two cases marked (777,888)to be highlighted in a certain small graph, (review all patterns picture)


-every number(period of time or candles) in the indicator settings should be adjustable
-every period of time should be adjustable 
-every filter should have on and off switch for it
-the dashboard must show how many cases the alert have detected so far,and how many bullish and bearish cases appeared on the chart
you could also design a dashboard for multiple timeframe (M5,M15,H1,H4)for previous or upcoming patterns on the same chart
even if the indicator\EA\dashboard is running on one time frame,example ,4 boxes one for current M5 and the three others for same setups on other time frames(M15,H1,H4) 
so that's 4 boxes or you can combine them all in one dashboard it's up to you cause graphics don't matter as long as they're clear

---------------------------------------------------------------------------
alerts should be triggered if
1-combination of both bullish and bearish cases detected (with settings to choose how many for reset and alert)
2-after (number) of  bullish arrows
3-after  (number) of bearish arrows
4-to reset the counter dashboard after a passage of the chosen period of time, example,reset the counter after one day (24 hours=288 M5 candles)

example 24 hours passed and 12 cases detected if both time and number of cases are conditions for the alert


more details will be provided when discussing the job

________________________________________________________________________________________________

, to summarize , i want an indicator scanner capable of detecting the 12 patterns mentioned in the picture 

-Alert whenever certain number of patterns (bullish , bearish , or both) reached

-dashboard to view the number of bullish , bearish ,or (all arrows) that are visible on chart

-filters such as , candle size , include\exclude pattern feature , and reset the counter after specific number is reached of (Bearish, Bullish , or both) all to be set in the settings, all variables to be adjustable of course.

-martingale or normal money management EA , with all the indicator feature + skip near pattern based on distance (time which is candles on the chart) feature, and for the BB indicator to be summoned in both indicator chart and in the EA.


응답함

1
개발자 1
등급
(294)
프로젝트
469
39%
중재
102
40% / 24%
기한 초과
77
16%
로드됨
게재됨: 2 코드
2
개발자 2
등급
(568)
프로젝트
641
41%
중재
25
48% / 36%
기한 초과
46
7%
작업중
3
개발자 3
등급
(17)
프로젝트
17
18%
중재
5
20% / 60%
기한 초과
2
12%
작업중
4
개발자 4
등급
(322)
프로젝트
499
67%
중재
5
40% / 0%
기한 초과
4
1%
무료
게재됨: 8 코드
5
개발자 5
등급
(15)
프로젝트
23
9%
중재
7
29% / 57%
기한 초과
2
9%
무료
6
개발자 6
등급
(365)
프로젝트
507
40%
중재
159
17% / 74%
기한 초과
99
20%
로드됨
7
개발자 7
등급
(270)
프로젝트
552
49%
중재
58
40% / 36%
기한 초과
228
41%
작업중
8
개발자 8
등급
(16)
프로젝트
26
54%
중재
1
0% / 0%
기한 초과
4
15%
작업중
게재됨: 3 코드
비슷한 주문
Requirements Specification for the development of the Expert Advisor, in the latest version of MetaTrader 5 including the source code. 1. The idea of the trading system is as follows: market entries are performed when a new renko box is created in the current trend direction using an indicator from Trading view. Indicator Name: Renko Candles Overlay Published By: LonesomeTheBlue Code Available In: Pine Script which
Hello I would like to modify the exit method of the trade for current expert advisor which include martingale trading. basically adjusting the position size and closing the trade. additional details will be provided in the next step
I have 3 pine script of trading view and want to convert it into mql5 code. basically it has 2 script and in that one script I use 2 different ways. so here is 3 stratagy that can work in one code mql5 and I can use in mt5
I need a MetaTrader 5 Expert Advisor with full MQ5 source code. Platform: - MT5 only - Full MQ5 source code mandatory - Must work with Exness broker (symbol suffix like XAUUSDm) Strategy: - Trend-based trading only - NO grid - NO martingale - NO averaging - Fixed Stop Loss & Take Profit - Max 1–2 trades at a time Risk Management: - Daily profit target (stop trading after hit) - Daily loss limit - Maximum drawdown
Multi-Asset AI Trading Bot Details Proposals I want a single, cohesive AI bot that can log in to MetaTrader, Coinbase, Robinhood, and TradingView, scan live market data, and execute trades automatically in stocks, forex, and crypto. The core logic must support day-trading, swing-trading, and scalping modes that I can toggle on a schedule or by simple configuration. The workflow I picture is: • Real-time data
I need someone that is able to develop for me a MT5 EA that perform VERY WELL on XAUUSD. Every strategy is accepted. By applying, please send me screenshot of results since 2018
Hello developers, I'm looking for existing, proven EAs (MQL5) that work flawlessly on MT5. Requirements: Demo version available for testing Backtest results + screenshots Verified trade history from 2018-2025 Budget is negotiable If you've got an EA that fits, hit me up
cần người tạo EA y thay đổi hình ảnh gửi đầy đủ tính năng như hình giá cả có thể tăng thêm khối lượng mong muốn viết giống hình không khác ROBOT HƠI NHIỀU TÍNH NĂNG MỌI NGƯỜI CÓ THỂ ĐƯA GIÁ THAM KHẢO
I need an experienced MQL4 developer to build a robust, conservative MT4 EA designed to trade Forex major pairs on IG . This is for long-term use with controlled drawdown — no martingale/grid/hedging . Platform / Broker Platform: MT4 Broker: IG Must work with: 5-digit pricing, variable spreads, slippage, and IG’s execution constraints Symbols (Majors only) EURUSD, GBPUSD, USDJPY, AUDUSD, USDCHF, USDCAD (configurable
Need a HFT scalping EA 30 - 100 USD
Require the development of a high-speed HFT, fully automated trading Expert Advisor (EA) for MetaTrader 5 , optimized for live trading on both Deriv and Exness . The EA must be designed for fast execution, low latency, and reliability on real-money accounts , with full compatibility across broker-specific contract specifications, tick sizes, tick values, pricing formats, and volume rules. It should automatically

프로젝트 정보

예산
120 - 140 USD
기한
에서 1  7 일