Change size volume lot signals
30 USD
Versione demo scaricata:
1 697
Pubblicato:
3 ottobre 2016
Versione attuale:
3.2
Non hai trovato un robot adatto?
Ordina il tuo
su Freelance
Vai alla sezione Freelance
Ordina il tuo
su Freelance
Come acquistare un Robot di Trading o un indicatore
Esegui il tuo EA
hosting virtuale
hosting virtuale
Prova un indicatore/robot di trading prima di acquistarlo
Vuoi guadagnare nel Market?
Come presentare un prodotto per venderlo con successo
Ti stai perdendo delle opportunità di trading:
- App di trading gratuite
- Oltre 8.000 segnali per il copy trading
- Notizie economiche per esplorare i mercati finanziari
Registrazione
Accedi
Accetti la politica del sito e le condizioni d’uso
Se non hai un account, registrati
Hi Kim,
Would like to check with you, I had previously purchased from you and currently I am using this in one of my acc (vps installed). However recently I wish to open another new acc and install (vps). My question is.
1) Do I need to purchase one more time this product(Change size volume lot signals) from you if I want it to be apply in my new acc as well?
If you use it on a vps, you do not have to buy it again. Thank you!
Dear Kim,
Although it took a great deal of trial and error, I am very, very pleased with your utility, it works wonderfully well.
I am wondering about the Maximum_lot_size, parameter. I dont understand your explanation.
Does it mean that the value I put in here, your utility will not open trades greater than that value, regardless of the multiplicaition settings.
Rarely the signal provider will open a trade, that is between 2.0 - 5.0 Lots, when the normal trades on the account range from 0.01 - 0.36 (and I multiply these smaller trades).
I want to avoid my account being blown up by one of these random Large trades, and if I could instruct the utility to not open trades, greater than say 2.0,
this would completely overcome my problem.
Can your utility do that and if so, how do I configure it.
Thankyou.
Будет версия для МТ5?
Take a look at my profit!
Mr. Kim,
I contacted you several times, you are not responding. I had issues with your EA and finally after not getting any help, I had to uninstall and re-install your EA. BUt now I do not see the "install" button. Your youtube tutorial is not all helpful that's why I sent personal messages to you. But I never got anything other than the "Hi" from you. Can you please help me?
Mr. Kim,
I contacted you several times, you are not responding. I had issues with your EA and finally after not getting any help, I had to uninstall and re-install your EA. BUt now I do not see the "install" button. Your youtube tutorial is not all helpful that's why I sent personal messages to you. But I never got anything other than the "Hi" from you. Can you please help me?
Hi Kim,
Please send me pictures of the issues. Thank you
New_order. I read it, I don't get it right. If set to false, the new order will or will not be copied. Please give a straight answer?Thanks
New_order. Я все прочитал, я не понимаю верно. При установке false будет или не будет копировать новый ордер. Прошу дать прямой ответ? Спасибо
New_order. I read it, I don't get it right. If set to false, the new order will or will not be copied. Please give a straight answer?Thanks
New_order. Я все прочитал, я не понимаю верно. При установке false будет или не будет копировать новый ордер. Прошу дать прямой ответ? Спасибо
Question is cancelled, withdrawn. I figured it out.
Question is cancelled, withdrawn. I figured it out.
Set false, If you have an old order, you don't create additional orders.
Bonjour, j'ai un multiplicateur x3 que j'avais activé sur un premier ordinateur.
J'ai par la suite paramétré le multiplicateur x sur un deuxième ordinateur, le montre ainsi, pour une position, un lot à 0.01 mais aussi pour la même position un lot à 0.03.
Je me suis dit que le paramétrage du premier ordinateur n'avait pas fonctionné car je ne voyais pas que 0,01, beaucoup j'ai lu par la suite que pour toute installation du multiplicateur sur un nouveau pc . Je pense donc m'être retrouvé avec 2 multiplicateur x3 sur le même compte. Est-ce possible?
Le trader que je suis à un Drawdown de 14% le 13/04/2018, ce même jour j'ai vu mes positions clôturaient automatiquement à cause de fonds insuffisants, est-ce possible? Je suis retrouvé avec les positions clôturaient là où celles du trader étaient toujours ouvertes.
Est-ce possible aussi que le 14% est multiplié par le premier x3 configuré sur mon premier ordinateur, mais il est aussi multiplié par 3 sur le deuxième où j'ai configurer le multiplicateur me retrouvant avec un x6?
Comment faire pour désactiver le multiplicateur sur mon premier ordinateur? Pour le moment j'ai reconfiguré "lot multiplicater" en 1.0 et sur le deuxième ordinateur j'ai configuré en "lot multiplicater" en 3.0
J'espère avoir été le plus clair possible dans mes explications.
Merci d'avance
Bonjour, j'ai un multiplicateur x3 que j'avais activé sur un premier ordinateur.
J'ai par la suite paramétré le multiplicateur x sur un deuxième ordinateur, le montre ainsi, pour une position, un lot à 0.01 mais aussi pour la même position un lot à 0.03.
Je me suis dit que le paramétrage du premier ordinateur n'avait pas fonctionné car je ne voyais pas que 0,01, beaucoup j'ai lu par la suite que pour toute installation du multiplicateur sur un nouveau pc . Je pense donc m'être retrouvé avec 2 multiplicateur x3 sur le même compte. Est-ce possible?
Le trader que je suis à un Drawdown de 14% le 13/04/2018, ce même jour j'ai vu mes positions clôturaient automatiquement à cause de fonds insuffisants, est-ce possible? Je suis retrouvé avec les positions clôturaient là où celles du trader étaient toujours ouvertes.
Est-ce possible aussi que le 14% est multiplié par le premier x3 configuré sur mon premier ordinateur, mais il est aussi multiplié par 3 sur le deuxième où j'ai configurer le multiplicateur me retrouvant avec un x6?
Comment faire pour désactiver le multiplicateur sur mon premier ordinateur? Pour le moment j'ai reconfiguré "lot multiplicater" en 1.0 et sur le deuxième ordinateur j'ai configuré en "lot multiplicater" en 3.0
J'espère avoir été le plus clair possible dans mes explications.
Merci d'avance
please use english language. Thank you
Please look at this picture :
it Did not work properly!!!!!!!!!!!!!!
I afterward parametrized the multiplier x on the second computer, so show it, for a position, a prize(lot) in 0.01 but also for the same position a prize(lot) in 0.03.
I said to myself that the configuration of the first computer had not worked because I did not see that 0,01, many I read afterward that for any installation of the multiplier on a new pc. I thus think of having found myself with 2 multiplier x3 on the same account. Is it possible?
The trader that I am in Drawdown of 14 % the 13/04/2018, the same day I saw my positions closed automatically because of insufficient funds(collections), is it possible? I am found with the positions closed where those of the trader were Always opened.
Is it possible as well as the 14 % is multiplied by the first one x3 configured on my first computer, but it is also multiplied by 3 on the second where I have to configure the multiplier finding me with one x6?
How to deactivate the multiplier on my first computer? For the moment I have reconfiguré " prize(lot) to multiplicater " in 1.0 and on the second computer I configured " prize(lot) to multiplicater " in 3.0
I hope to have been the most clear possible in my explanations.
Thank you in advance
Hello, I have a multiplier x3 which I had activated on a first computer.
I afterward parametrized the multiplier x on the second computer, so show it, for a position, a prize(lot) in 0.01 but also for the same position a prize(lot) in 0.03.
I said to myself that the configuration of the first computer had not worked because I did not see that 0,01, many I read afterward that for any installation of the multiplier on a new pc. I thus think of having found myself with 2 multiplier x3 on the same account. Is it possible?
The trader that I am in Drawdown of 14 % the 13/04/2018, the same day I saw my positions closed automatically because of insufficient funds(collections), is it possible? I am found with the positions closed where those of the trader were Always opened.
Is it possible as well as the 14 % is multiplied by the first one x3 configured on my first computer, but it is also multiplied by 3 on the second where I have to configure the multiplier finding me with one x6?
How to deactivate the multiplier on my first computer? For the moment I have reconfiguré " prize(lot) to multiplicater " in 1.0 and on the second computer I configured " prize(lot) to multiplicater " in 3.0
I hope to have been the most clear possible in my explanations.
Thank you in advance
You only install this tool on one PC/vps, one window and one chart/ account. Thank you!
does it only work on demo?
Sorry! It not run on demo!
I bought your product to place more lots
Everything was going well, there derepende he no longer opens on the chart
Give the message in the expert tab "can not load"
What can it be ?
Hi Kim. I have 3 accounts in my metatrader, how do I set the EA differently for each one?
And, as you can see on this image, is openning 4 EA order.. how do I correct this?