Net Movement (NM) Arrow Indicator

MQL4 Indicators

Job finished

Execution time 1 day
Feedback from customer
Hamed is razor sharp in understanding your requirements and can produce superb code. He can meet your deadlines and yet can produce high quality results. I highly recommend him.
Feedback from employee
i had good job with him, and i hope can work again with him.

Specification

Net Movement (NM) Arrow Indicator

Abbreviations used in this document:

Net Movement = NM

Close Price of the candle = CP

Pivot Point of the candle = PP

Bottom Wick Length in pips = BW 

Top Wick Length in pips = TW 

 

This is an indicator which places a green arrow below the low of EVERY candle when NM arrow is up for that particular candle and places a red arrow above the high of EVERY candle when NM is down for that particular candle.  In essence, either an up arrow or a down arrow will be assigned to every candle ONLY after the candle has completed its formation.

 

For all pips numbers, use 5 decimals for non-JPY pairs and for JPY pairs, use 3 decimals.

 

Sign Assignment for BW: Even though BW is either a finite positive number or zero for all candles, for the sake of this NM Arrow indicator, always assign + ve sign in front of this BW number in the NM arrow calculation below, because BW represents buyers’ force, pushing the price up.

 

Sign Assignment for TW: Even though TW is either a finite positive number or zero for all candles, for the sake of this NM Arrow indicator, always assign – ve sign in front of this TW number in the NM arrow calculation below, because TW represents sellers’ force pushing price down.  

 

PP is calculated as below:

(High Price of the candle + Low Price of the candle + Close Price of the candle) / 3

 

Procedure for Arriving at NM Arrow:

Calculate (CP – PP) value in pips for each candle.  This number can be a + ve number or a – ve number or a zero.  

 

1.      If (CP – PP) is a + ve number, then add BW to it.  The BW is either a finite number or a zero.  The result is a + ve [(CP – PP) + BW] number in pips.

 

Compare + ve [(CP – PP) + BW] number with TW number.  Remember to assign – ve sign in front of TW number, as mentioned above in Sign Assignment for TW.   

 

a.      If [(CP – PP) + BW] number is a larger + ve number compared to the smaller – ve TW number, then NM arrow is up for this candle.  The NM arrow indicator that you are designing should show a green arrow under the low price of this candle.

b.      On the other hand, if [(CP – PP) + BW] is a smaller + ve number compared to the larger – ve TW number, then NM arrow is down for this candle and the NM arrow indicator should show a red arrow above the high price of this candle.

 

2.      If (CP – PP) is a – ve number, then add TW to it, which is either a finite number or a zero.  As mentioned in Sign Assignment for TW above, remember to assign – ve sign in front of TW number before adding to – ve (CP-PP) number.  The result is a – ve [(CP – PP) - TW] number in pips.

 

a.      Compare – ve [(CP – PP) - TW] number with BW number which is either a finite number or a zero.  Before comparison, remember to assign + ve sign before BW number, as mentioned above in Sign Assignment for BW.  If [(CP – PP) - TW] is a larger – ve number compared to the smaller + ve BW number, then NM arrow is down for this candle and the NM arrow indicator should show a red arrow above the high price of this candle.

 

b.      On the other hand, If [(CP – PP) - TW] is a smaller – ve number compared to the

larger + ve BW number, then NM arrow is up for this candle and the NM indicator should show a green arrow below the low price of this candle.

 

3.      If (CP – PP) is zero (this means CP = PP), compare the BW number in pips with TW number in pips.  Both BW and TW numbers can be finite numbers or zeros.  As mentioned above in the Sign Assignments for BW and TW, add + ve sign in front of BW number and a – ve sign in front of TW number. 

 

a.      If BW is a larger + ve number compared to the smaller - ve TW number, then NM arrow is up for this candle and the NM indicator should show a green arrow below the low price of this candle. 

 

b.      On the other hand, if TW is larger – ve number compared to a smaller + ve BW number, then NM arrow is down and the NM indicator should show a red arrow above the high price of this candle.

 

The indicator should have the following changeable settings in it:

a.      This indicator should always place the red arrow and green arrow at a distance from the high or low of the candle.  This distance should be changeable with a setting.

b.      This indicator should have visualization setting so that it is visible only in time frames of our choice. 

c.       The size of the arrow should be changeable

d.      The color of the arrow should be changeable.

 

Responded

1
Developer 1
Rating
(258)
Projects
396
28%
Arbitration
70
19% / 49%
Overdue
121
31%
Free
Similar orders
//+------------------------------------------------------------------+ //| Durban Gold Hunter.mq5 (v3.00) | //| Multi-pair EA for MetaTrader 5 (Razor Markets, XM). | //| Strategy modules (each can be switched on/off): | //| 1. EMA crossover | //| 2. 714 method (EMA 7 + RSI 14) | //| 3. CRT (Candle Range Theory: range sweep and close back inside)| //| 4. Trend line breakout (auto-drawn from swing highs/lows) | //| 5
I want NinjaTrader to behave like Tradovate. When I hover over a candlestick, the cursor should automatically snap to the center of that candle across all open charts. For example, when I hover over a 30-minute candle, the cursor should align with the center of the corresponding candles on the 15-minute and other chart timeframes. I also want vertical lines drawn on one chart to automatically align with the center of
Hello, I already have an MT5 Expert Advisor for XAUUSD based on Fibonacci, market structure, BOS/CHoCH and swing trading. I need an experienced MQL5 developer to modify my existing EA, not develop a completely new one. Required modifications: Partial take-profit system with multiple TP levels. Keep profit targets conservative, using Fibonacci extension levels. Stop-loss placement beyond liquidity areas, not exactly
Hello, I am an independent developer selling an Expert Advisor (EA) on the MQL5 Market. I am looking for an experienced Forex affiliate marketing company or professional marketer to promote my existing MT5 trading robot to customers worldwide. My proposed partnership offers a 35% commission per verified sale, with the possibility of a long-term collaboration. I would like to know: Do you promote third-party MT5
The objective is to develop a custom technical indicator for MetaTrader 5 (MQL5) that replicates the exact visual structure, inputs, and features of the "AYN-Indicator by Snurk" as shown in the provided screenshot. The indicator must analyze price actions based on a flexible lookback period, plot dynamic trend filters, and render precise Buy/Sell breakout labels without any lagging or repainting
Requirements Specification: Debug & Error Fixing: Review the entire source code of the MQL expert advisor. Identify and fix all logical errors, bugs, and performance issues that cause trades to close prematurely or yield extremely low profits. Strategy Restructuring & Optimization: Fully analyze and optimize the current entry and exit strategy for USDJPY and GBPUSD. Modify, upgrade, or completely rewrite the entry
Winter 500+ USD
I am looking for an MQL5 developer to independently review an existing EA’s execution and position management logic. The review should focus on duplicate orders, trade isolation by symbol and magic number, broker price and volume constraints, error handling, and recovery after a terminal restart. This order is for an audit report. Please do not modify the source or change the trading strategy. For each finding
Title: Fully Automatic MT5 Trading Bot (Expert Advisor) with Risk Management I want a fully automated trading robot (Expert Advisor) for MetaTrader 5, written in MQL5. The bot must automatically analyse market data, identify trading opportunities, execute BUY and SELL orders, manage open positions, and close trades according to predefined rules without requiring manual confirmation for each trade. Requirements
The Traffic Rush 250 - 500 USD
Subject: Inquiry: MQL4 Optimization & Refinement for Proprietary Binary Suite (Pine-to-MT4) I am seeking an experienced MQL4 / MetaTrader developer to optimize and finalize a custom binary options trading suite. Project Summary Core Architecture: Multi-pair Regime Scanner (22-pair FX basket monitoring state/score) and a Signal Engine operating on M1 charts. Strategy Sequence: Pre-Alert Dot: Placed on a candle closing
Hello I want some that can help with my strategy signal I have the video that you are going to watch if you know you can help me with kindly do well to bid and let discussed it an urgent project and also if you can not work before you get paid please don bid thanks

Project information

Budget
20 USD
Deadline
from 1 to 3 day(s)