ForumSections

Any questions from newcomers on MQL4 and MQL5, help and discussion on algorithms and codes - page 1371

New comment
MakarFX:

To the very bottom of the EA.

Unfortunately it does not multiply!!!(((

Сергей Дыбленко:

Unfortunately it does not multiply!!!(((

This function calculates the lot in relation to the free margin and the specified risk!

What multiplication are you talking about?

MakarFX:

This function calculates the lot in relation to the free margin and the specified risk!

What multiplication are you talking about?

The increase in lots after each profit!

Сергей Дыбленко:

about increasing lots after each profit!

This function will increase the lot after a profit, but if the profit allows an increase by the minimum lot increment

[Deleted]
Сергей Дыбленко:

about increasing lots after each profit!

here is an example up to 10 000 your balance will lot 0.1 from 10 000 to 20 000 with 0.5 lot

from 20 000 to 40 000 with lot 1.0 over 40 000 with 2.0 lot

//+------------------------------------------------------------------+
//|                                               Moving Average.mq4 |
//|                   Copyright 2005-2014, MetaQuotes Software Corp. |
//|                                              http://www.mql4.com |
//+------------------------------------------------------------------+
#property copyright   "2005-2014, MetaQuotes Software Corp."
#property link        "http://www.mql4.com"
#property description "Moving Average sample expert advisor"

#define  MAGICMA  20131111
//--- Inputs
input double InpLots       =0.1;
input int    MovingPeriod  =12;
input int    MovingShift   =6;
//+------------------------------------------------------------------+
//| Calculate open positions                                         |
//+------------------------------------------------------------------+
int CalculateCurrentOrders(string symbol)
  {
   int buys=0,sells=0;
//---
   for(int i=0; i<OrdersTotal(); i++)
     {
      if(OrderSelect(i,SELECT_BY_POS,MODE_TRADES)==false)
         break;
      if(OrderSymbol()==Symbol() && OrderMagicNumber()==MAGICMA)
        {
         if(OrderType()==OP_BUY)
            buys++;
         if(OrderType()==OP_SELL)
            sells++;
        }
     }
//--- return orders volume
   if(buys>0)
      return(buys);
   else
      return(-sells);
  }
//+------------------------------------------------------------------+
//| Calculate optimal lot size                                       |
//+------------------------------------------------------------------+
double LotsOptimized()
  {
   double Lots=InpLots;
   double ab=AccountBalance();
   if(ab>=10000 && ab<20000)
      Lots=0.5;
   if(ab>=20000 && ab<40000)
      Lots=1.0;
   if(ab>=40000)
      Lots=2.0;
   return(Lots);
  }
//+------------------------------------------------------------------+
//| Check for open order conditions                                  |
//+------------------------------------------------------------------+
void CheckForOpen()
  {
   double ma;
   int    res;
//--- go trading only for first tiks of new bar
   if(Volume[0]>1)
      return;
//--- get Moving Average
   ma=iMA(NULL,0,MovingPeriod,MovingShift,MODE_SMA,PRICE_CLOSE,0);
//--- sell conditions
   if(Open[1]>ma && Close[1]<ma)
     {
      res=OrderSend(Symbol(),OP_SELL,LotsOptimized(),Bid,3,0,0,"",MAGICMA,0,Red);
      return;
     }
//--- buy conditions
   if(Open[1]<ma && Close[1]>ma)
     {
      res=OrderSend(Symbol(),OP_BUY,LotsOptimized(),Ask,3,0,0,"",MAGICMA,0,Blue);
      return;
     }
//---
  }
//+------------------------------------------------------------------+
//| Check for close order conditions                                 |
//+------------------------------------------------------------------+
void CheckForClose()
  {
   double ma;
//--- go trading only for first tiks of new bar
   if(Volume[0]>1)
      return;
//--- get Moving Average
   ma=iMA(NULL,0,MovingPeriod,MovingShift,MODE_SMA,PRICE_CLOSE,0);
//---
   for(int i=0; i<OrdersTotal(); i++)
     {
      if(OrderSelect(i,SELECT_BY_POS,MODE_TRADES)==false)
         break;
      if(OrderMagicNumber()!=MAGICMA || OrderSymbol()!=Symbol())
         continue;
      //--- check order type
      if(OrderType()==OP_BUY)
        {
         if(Open[1]>ma && Close[1]<ma)
           {
            if(!OrderClose(OrderTicket(),OrderLots(),Bid,3,White))
               Print("OrderClose error ",GetLastError());
           }
         break;
        }
      if(OrderType()==OP_SELL)
        {
         if(Open[1]<ma && Close[1]>ma)
           {
            if(!OrderClose(OrderTicket(),OrderLots(),Ask,3,White))
               Print("OrderClose error ",GetLastError());
           }
         break;
        }
     }
//---
  }
//+------------------------------------------------------------------+
//| OnTick function                                                  |
//+------------------------------------------------------------------+
void OnTick()
  {
//--- check for history and trading
   if(Bars<100 || IsTradeAllowed()==false)
      return;
//--- calculate open orders by current symbol
   if(CalculateCurrentOrders(Symbol())==0)
      CheckForOpen();
   else
      CheckForClose();
//---
  }
//+------------------------------------------------------------------+
SanAlex:

here is an example up to 10 000 your balance will lot 0.1 from 10 000 to 20 000 with 0.5 lot

from 20 000 to 40 000 with 1.0 lot over 40 000 with 2.0 lot

this is a fixed lot increment.

for me, if the profit is greater than or equal to

 MarketInfo(Symbol(), MODE_MARGINREQUIRED)*MarketInfo(Symbol(), MODE_LOTSTEP)

it will increase the lot,

but if there are no other open orders that use margin.

[Deleted]
MakarFX:

it is a fixed increase in the lot.

In my case, if the profit is greater than or equal to

then there will be an increase in the lot,

but if there are no other open orders that use margin.

I have cheated - if the position is in deficit it would increase the lot

//+------------------------------------------------------------------+
//| Calculate optimal lot size                                       |
//+------------------------------------------------------------------+
double OptimizedBuy(void)
  {
   double PROFIT_BUY=0.00;
   for(int i=OrdersTotal()-1; i>=0; i--) // returns the number of open positions
     {
      if(OrderSelect(i,SELECT_BY_POS) && OrderSymbol()==Symbol())
        {
         if(OrderSymbol()==Symbol() && OrderType()==OP_BUY)
           {
            PROFIT_BUY=PROFIT_BUY+NormalizeDouble(OrderProfit(),2);
           }
        }
     }
   double Lots=InpLots;
   double ab=PROFIT_BUY;
   if(ab<-1 && ab>=-InpLots_01)
      Lots=InpLots1;
   if(ab<-InpLots_01 && ab>=-InpLots_02)
      Lots=InpLots2;
   if(ab<-InpLots_02 && ab>=-InpLots_03)
      Lots=InpLots3;
   if(ab<-InpLots_03)
      Lots=InpLots4;
//--- return trading volume
   return(Lots);
  }
//+------------------------------------------------------------------+
//| Calculate optimal lot size                                       |
//+------------------------------------------------------------------+
double OptimizedSell(void)
  {
   double PROFIT_SELL=0.00;
   for(int i=OrdersTotal()-1; i>=0; i--) // returns the number of open positions
     {
      if(OrderSelect(i,SELECT_BY_POS) && OrderSymbol()==Symbol())
        {
         if(OrderSymbol()==Symbol() && OrderType()==OP_SELL)
           {
            PROFIT_SELL=PROFIT_SELL+NormalizeDouble(OrderProfit(),2);
           }
        }
     }
   double Lots=InpLots;
   double ab=PROFIT_SELL;
   if(ab<-1 && ab>=-InpLots_01)
      Lots=InpLots1;
   if(ab<-InpLots_01 && ab>=-InpLots_02)
      Lots=InpLots2;
   if(ab<-InpLots_02 && ab>=-InpLots_03)
      Lots=InpLots3;
   if(ab<-InpLots_03)
      Lots=InpLots4;
//--- return trading volume
   return(Lots);
  }
//+------------------------------------------------------------------+
Thank you all for your help BUT my brains which are not there were not enough to do what I needed!
Сергей Дыбленко:
Thank you all for your help BUT my brains are not enough to do what I need to do!

You explain point by point what is needed.

How many orders in the work, how many pairs you trade simultaneously, what are the risks per trade (if any)

And something else from you)

SanAlex:

Here I was cheating - if positions are in deficit the lot would increase

Sasha tweaked it a bit to increase the lot by the odds

input double factor=1.05;        // коофициент умножения
//+------------------------------------------------------------------+
//| Calculate optimal lot size                                       |
//+------------------------------------------------------------------+
double OptimizedSell(void)
  {
   double Lots       =0.00;
   double PROFIT_BUY =0.00;
   double LOT_BUY    =0.00;
   double PROFIT_SELL=0.00;
   double LOT_SELL   =0.00;
   for(int i=OrdersTotal()-1; i>=0; i--) // returns the number of open positions
     {
      if(OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==true)
        {
         if(OrderSymbol()==Symbol())
           {
            if(OrderType()==OP_BUY)
              {
               PROFIT_BUY=PROFIT_BUY+NormalizeDouble(OrderProfit(),2);
               LOT_BUY   =LOT_BUY+NormalizeDouble(OrderLots(),2);
              }
            if(OrderType()==OP_SELL)
              {
               PROFIT_SELL=PROFIT_SELL+NormalizeDouble(OrderProfit(),2);
               LOT_SELL   =LOT_SELL+NormalizeDouble(OrderLots(),2);
              }
           }
        }
     }
   if(PROFIT_BUY<0)
      Lots=LOT_BUY*factor;
      else Lots=LOT_BUY;
   if(PROFIT_SELL<0)
      Lots=LOT_SELL*factor;
      else Lots=LOT_SELL;
//--- return trading volume
   return(Lots);
  }
//+------------------------------------------------------------------+
1...136413651366136713681369137013711372137313741375137613771378...1965
New comment