How to check if the order was closed by TP or SL?

New comment
  
Hello
 
I have read some threads but im not sure if my code can check properly order close by SL or TP:
 
 
OrderSelect(HistoryTotal()-1,SELECT_BY_POS,MODE_HISTORY); 
      if(OrderSymbol()==Symbol()) 
      { 
         if(OrderClosePrice()==OrderStopLoss()) 
         
         if (`sl`== OrderComment();
         {
 
          }
 
      } 
 
the code should check the comment  sl or tp in history in last order
master
 

I think you need some type of limiter to keep from repeating Comment on same closed order.

Try this:

I use this code to send email notification when order is closed by StopLoss or TakeProfit. It seems to work quite well. This code is for when only one order is open per symbol. 

extern bool UseEmail = true; // insert in variable setup section of EA.
int bticket=0: // insert in variable setup section of EA.
if(UseMail) email(); // insert somewhere in int start() section of EA.
 
// insert this code in int start() section of EA.
int total = OrdersTotal();
for(int cnt=0;cnt<total;cnt++)
{
OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
if(OrderSymbol() == Symbol() ){
bticket=OrderTicket();
}
}
 
// insert this following code after 
// int start() {  
 
// } section of EA. 
 
void email() {
if(bticket>0) {
OrderSelect(bticket, SELECT_BY_TICKET, MODE_HISTORY);
if (OrderSymbol()==Symbol() ) {
 
// Buy Closed at StopLoss
if (OrderType()==OP_BUY && OrderClosePrice()==OrderStopLoss()) {
SendMail("Close Alert","[" + Symbol() + "]  " + DoubleToStr(OrderClosePrice(),Digits) + 
"\n\n  Close Buy @ sl  ===  Order Profit = " + DoubleToStr(OrderProfit(),2) +
"\nAccount Balance = " + DoubleToStr(AccountBalance(),2) + 
"   ===  Account Equity = " + DoubleToStr(AccountEquity(),2) +
"\n\nServer Trade Time = "+TimeToStr(TimeCurrent(),TIME_DATE|TIME_SECONDS));
}
 
// Sell Closed at StopLoss
if (OrderType()==OP_SELL && OrderClosePrice()==OrderStopLoss()) {
SendMail("Close Alert","[" + Symbol() + "]  " + DoubleToStr(OrderClosePrice(),Digits) + 
"\n\n  Close Sell @ sl  ===  Order Profit = " + DoubleToStr(OrderProfit(),2) +
"\nAccount Balance = " + DoubleToStr(AccountBalance(),2) + 
"   ===  Account Equity = " + DoubleToStr(AccountEquity(),2) +
"\n\nServer Trade Time = "+TimeToStr(TimeCurrent(),TIME_DATE|TIME_SECONDS));
}
 
// Buy Closed at TakeProfit
if (OrderType()==OP_BUY && OrderClosePrice()==OrderTakeProfit()) {
SendMail("Close Alert","[" + Symbol() + "]  " + DoubleToStr(OrderClosePrice(),Digits) + 
"\n\n  Close Buy @ tp  ===  Order Profit = " + DoubleToStr(OrderProfit(),2) +
"\nAccount Balance = " + DoubleToStr(AccountBalance(),2) + 
"   ===  Account Equity = " + DoubleToStr(AccountEquity(),2) +
"\n\nServer Trade Time = "+TimeToStr(TimeCurrent(),TIME_DATE|TIME_SECONDS));
}
 
// Sell Closed at TakeProfit
if (OrderType()==OP_SELL && OrderClosePrice()==OrderTakeProfit()) {
SendMail("Close Alert","[" + Symbol() + "]  " + DoubleToStr(OrderClosePrice(),Digits) + 
"\n\n  Close Sell @ tp  ===  Order Profit = " + DoubleToStr(OrderProfit(),2) +
"\nAccount Balance = " + DoubleToStr(AccountBalance(),2) + 
"   ===  Account Equity = " + DoubleToStr(AccountEquity(),2) +
"\n\nServer Trade Time = "+TimeToStr(TimeCurrent(),TIME_DATE|TIME_SECONDS));
}
bticket=0;
}
}
}
 
wackena wrote >>

I think you need some type of limiter to keep from repeating Comment on same closed order.

Try this:

I use this code to send email notification when order is closed by StopLoss or TakeProfit. It seems to work quite well. This code is for when only one order is open per symbol.

hi can you insert the email code in to my code and email it back to me as i can not get no errors when id o it?

------

#property copyright "Copyright © 2008, PUNCHER from POLAND"
#property link "bemowo@tlen.pl"
// 5 or 15 MIN timeframe only
extern int RSIPeriod=14;
extern int Short_price_MA_periods=9;
extern int Long_price_MA_periods=45;
extern int Short_RSI_MA_periods=9;
extern int Long_RSI_MA_periods=45;
extern int Slippage=3;
extern int pisto=0; //Stochastic Indicator period
extern int pistok=5; // Stochastic Period(amount of bars) for the calculation of %K line
extern int pistod=3; //Stochastic Averaging period for the calculation of %D line
extern int istslow=3; //Stochastic Value of slowdown
extern int pimacd=0; //Indicator period
extern int fastpimacd=12; //Averaging period for calculation of a quick MA
extern int slowpimacd=26; //Averaging period for calculation of a slow MA
extern int signalpimacd=9; //Averaging period for calculation of a signal line
extern int piwpr=0; //WPR Indicator period
extern int piwprbar=14; //WPR Period (amount of bars) for indicator calculation
extern int pidem=0; //Indicator period
extern int pidemu=14; //Period of averaging for indicator calculation
double Lots=25; // that mean 0.1 value if you want 1 lot type 10
double tp=40; // take profit
double sl=900; // stop loss
int start()
{
int arraysize=200;
double RSI[];
double RSI_SMA[];
ArrayResize(RSI,arraysize);
ArrayResize(RSI_SMA,arraysize);
ArraySetAsSeries(RSI,true);

for(int i3=arraysize-1;i3>=0;i3--)
RSI[i3]=iRSI(NULL,0,RSIPeriod,PRICE_CLOSE,i3);
for(i3=arraysize-1;i3>=0;i3--)
RSI_SMA[i3]=iMAOnArray(RSI,0,Short_RSI_MA_periods,0,MODE_SMA,i3);
double RSI9 =RSI_SMA[1];

for(i3=arraysize-1;i3>=0;i3--)
RSI[i3]=iRSI(NULL,0,RSIPeriod,PRICE_CLOSE,i3);
for(i3=arraysize-1;i3>=0;i3--)
RSI_SMA[i3]=iMAOnArray(RSI,0,Long_RSI_MA_periods,0,MODE_SMA,i3);
double RSI45 =RSI_SMA[1];
double Price45=iMA(NULL,0, Long_price_MA_periods,0,MODE_LWMA,PRICE_CLOSE,1);
double Price9 =iMA(NULL,0, Short_price_MA_periods,0,MODE_SMA,PRICE_CLOSE,1);

bool Long=false;
bool Short=false;
bool Sideways=false;
if(Price9>Price45 && RSI9>RSI45) Long=true;
if(Price9<Price45 && RSI9<RSI45) Short=true;
if(Price9>Price45 && RSI9<RSI45) Sideways=true;
if(Price9<Price45 && RSI9>RSI45) Sideways=true;
if(Long==true && OrdersTotal()==0)
{
if(iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,1)<19&&iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,0)>=19)
{
if(iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,1)<iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_SIGNAL,1)&&iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,0)>=iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_SIGNAL,0))
{
if(iDeMarker(NULL,pidem,pidemu,1)<0.35&&iDeMarker(NULL,pidem,pidemu,0)>=0.35)
{
if (iWPR(NULL,piwpr,piwprbar,1)<-81&&iWPR(NULL,piwpr,piwprbar,0)>=-81)
{OrderSend(Symbol(),OP_BUY,Lots/10,Ask,Slippage,Ask-sl*Point,Ask+tp*Point,"Piotrek Buy");}
}

}
}
}
if(Short==true && OrdersTotal()==0)
{
if(iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,1)>81&&iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,0)<=81)
{
if(iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,1)>iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_SIGNAL,1)&&iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,0)<=iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_SIGNAL,0))
{
if(iDeMarker(NULL,pidem,pidemu,1)>0.63&&iDeMarker(NULL,pidem,pidemu,0)<=0.63)
{
if (iWPR(NULL,piwpr,piwprbar,1)>-19&&iWPR(NULL,piwpr,piwprbar,0)<=-19)
{OrderSend(Symbol(),OP_SELL,Lots/10,Bid,Slippage,Bid+sl*Point,Bid-tp*Point,"Piotrek Sell");}
}

}
}
}
}

 
paulme33 wrote >>

hi can you insert the email code in to my code and email it back to me as i can not get no errors when id o it?

------

#property copyright "Copyright © 2008, PUNCHER from POLAND"
#property link "bemowo@tlen.pl"
// 5 or 15 MIN timeframe only
extern int RSIPeriod=14;
extern int Short_price_MA_periods=9;
extern int Long_price_MA_periods=45;
extern int Short_RSI_MA_periods=9;
extern int Long_RSI_MA_periods=45;
extern int Slippage=3;
extern int pisto=0; //Stochastic Indicator period
extern int pistok=5; // Stochastic Period(amount of bars) for the calculation of %K line
extern int pistod=3; //Stochastic Averaging period for the calculation of %D line
extern int istslow=3; //Stochastic Value of slowdown
extern int pimacd=0; //Indicator period
extern int fastpimacd=12; //Averaging period for calculation of a quick MA
extern int slowpimacd=26; //Averaging period for calculation of a slow MA
extern int signalpimacd=9; //Averaging period for calculation of a signal line
extern int piwpr=0; //WPR Indicator period
extern int piwprbar=14; //WPR Period (amount of bars) for indicator calculation
extern int pidem=0; //Indicator period
extern int pidemu=14; //Period of averaging for indicator calculation
double Lots=25; // that mean 0.1 value if you want 1 lot type 10
double tp=40; // take profit
double sl=900; // stop loss
int start()
{
int arraysize=200;
double RSI[];
double RSI_SMA[];
ArrayResize(RSI,arraysize);
ArrayResize(RSI_SMA,arraysize);
ArraySetAsSeries(RSI,true);

for(int i3=arraysize-1;i3>=0;i3--)
RSI[i3]=iRSI(NULL,0,RSIPeriod,PRICE_CLOSE,i3);
for(i3=arraysize-1;i3>=0;i3--)
RSI_SMA[i3]=iMAOnArray(RSI,0,Short_RSI_MA_periods,0,MODE_SMA,i3);
double RSI9 =RSI_SMA[1];

for(i3=arraysize-1;i3>=0;i3--)
RSI[i3]=iRSI(NULL,0,RSIPeriod,PRICE_CLOSE,i3);
for(i3=arraysize-1;i3>=0;i3--)
RSI_SMA[i3]=iMAOnArray(RSI,0,Long_RSI_MA_periods,0,MODE_SMA,i3);
double RSI45 =RSI_SMA[1];
double Price45=iMA(NULL,0, Long_price_MA_periods,0,MODE_LWMA,PRICE_CLOSE,1);
double Price9 =iMA(NULL,0, Short_price_MA_periods,0,MODE_SMA,PRICE_CLOSE,1);

bool Long=false;
bool Short=false;
bool Sideways=false;
if(Price9>Price45 && RSI9>RSI45) Long=true;
if(Price9<Price45 && RSI9<RSI45) Short=true;
if(Price9>Price45 && RSI9<RSI45) Sideways=true;
if(Price9<Price45 && RSI9>RSI45) Sideways=true;
if(Long==true && OrdersTotal()==0)
{
if(iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,1)<19&&iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,0)>=19)
{
if(iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,1)<iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_SIGNAL,1)&&iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,0)>=iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_SIGNAL,0))
{
if(iDeMarker(NULL,pidem,pidemu,1)<0.35&&iDeMarker(NULL,pidem,pidemu,0)>=0.35)
{
if (iWPR(NULL,piwpr,piwprbar,1)<-81&&iWPR(NULL,piwpr,piwprbar,0)>=-81)
{OrderSend(Symbol(),OP_BUY,Lots/10,Ask,Slippage,Ask-sl*Point,Ask+tp*Point,"Piotrek Buy");}
}

}
}
}
if(Short==true && OrdersTotal()==0)
{
if(iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,1)>81&&iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,0)<=81)
{
if(iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,1)>iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_SIGNAL,1)&&iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_MAIN,0)<=iStochastic(NULL,pisto,pistok,pistod,istslow,MODE_EMA,0,MODE_SIGNAL,0))
{
if(iDeMarker(NULL,pidem,pidemu,1)>0.63&&iDeMarker(NULL,pidem,pidemu,0)<=0.63)
{
if (iWPR(NULL,piwpr,piwprbar,1)>-19&&iWPR(NULL,piwpr,piwprbar,0)<=-19)
{OrderSend(Symbol(),OP_SELL,Lots/10,Bid,Slippage,Bid+sl*Point,Bid-tp*Point,"Piotrek Sell");}
}

}
}
}
}

my email is paul.smith.282@btinternet.com

 
wackena:

I think you need some type of limiter to keep from repeating Comment on same closed order.

Try this:

I use this code to send email notification when order is closed by StopLoss or TakeProfit. It seems to work quite well. This code is for when only one order is open per symbol.

Hi,

I think this code is great! But it only sends me alerts on the MT4 platform. Is there a way to have it actually send me text messages to my phone? I set up my tools>options>email, so I receive

price alerts alright. But I would really like to receive the txt msgs automatically when my orders close.

 
patterns:

[...] Is there a way to have it actually send me text messages to my phone? [...]

https://forum.mql4.com/search/sms.
New comment
Reason: