RE: RSI in ZeroCode ?????

[Deleted] 2005.07.28 02:43

For some reason I can't figure out how to input the buy and seel logics in ZeroCode I have the wma and sma figured out but here is what I want to add......

//*---------------------------------------------------------------------------------------------------------*\

// This MQL is automatically generated by FXFisherman ZeroCode v1.0.2014.30845 (https://www.mql5.com/en/forum)

// DISCLAIMER:

// FXFisherman ZeroCode is provided free of charge, and, therefore, on an "as is" basis, without warranty

// of any kind, express or implied, including without limitation the warranties that it is free of defects,

// virus free, able to operate on an uninterrupted basis, merchantable, fit for a particular purpose or

// non-infringing. In any case, the author(s) will not be responsible or liable for ANY SPECIAL, INCIDENTAL,

// CONSEQUENTIAL, INDIRECT OR ANY OTHER LOSSES caused by using of this software. USE IT AT YOUR OWN RISK.

//*-----------------------------------PLEASE DO NOT REMOVE THIS HEADER--------------------------------------*/

/*[[ Name := Turbo_trader-3

Author :=

Link := Coded_by_FXFisherman_ZeroCode_@www.fxfisherman.com

Lots := 1

Stop Loss := 20

Take Profit := 20

Trailing Stop := 15

]]*/

defines: Slippage(3);

defines: ;

var: cnt(0),IsBuying(False),IsSelling(False),IsClosing(False),RealTP(0),RealSL(0);

var: rsi4_1(0),rsi4_0(0),stoc3d_1(0),stoc3d_0(0),stoc3k_1(0),stoc3k_0(0),ma1_1(0),ma1_0(0),ma2_1(0),ma2_0(0);

// Check for invalid bars and takeprofit

If Bars<200 then Exit;

// Calculate indicators' value

rsi4_1 = iRSI(20,1);

rsi4_0 = iRSI(20,0);

stoc3d_1 = iSTO(21,6,6,MODE_SMA,MODE_SIGNAL,1);

stoc3d_0 = iSTO(21,6,6,MODE_SMA,MODE_SIGNAL,0);

stoc3k_1 = iSTO(21,6,6,MODE_SMA,MODE_MAIN,1);

stoc3k_0 = iSTO(21,6,6,MODE_SMA,MODE_MAIN,0);

ma1_1 = iMAEx(10,MODE_SMA,0,PRICE_CLOSE,1);

ma1_0 = iMAEx(10,MODE_SMA,0,PRICE_CLOSE,0);

ma2_1 = iMAEx(10,MODE_LWMA,0,PRICE_CLOSE,1);

ma2_0 = iMAEx(10,MODE_LWMA,0,PRICE_CLOSE,0);

// Check for BUY, SELL, and CLOSE signal

IsBuying = (ma1_1 <= ma2_1)

and (ma1_0 > ma2_0)

and (stoc3k_0 == stoc3k_0)

and (rsi4_1 == rsi4_1);

IsSelling = False;

IsClosing = False;

// Control open trades

for cnt=1 to TotalTrades

{

// Control only market trades not entry order

if OrderValue(cnt,VAL_TYPE)<=OP_SELL and

OrderValue(cnt,VAL_SYMBOL)=Symbol then

{

// Check for close signal for bought trade

If OrderValue(cnt,VAL_TYPE)=OP_BUY then

{

If IsSelling or IsClosing then

{

// Close bought trade

CloseOrder(OrderValue(cnt,VAL_TICKET),OrderValue(cnt,VAL_LOTS),Bid,3,Violet);

Alert("Turbo_trader-3: Closing BUY order.");

};

// Check trailing stop

If TrailingStop>0 then

{

If (Bid-OrderValue(cnt,VAL_OPENPRICE))>(Point*TrailingStop) then

{

If OrderValue(cnt,VAL_STOPLOSS)<(Bid-Point*TrailingStop) then

{

// Modify trailing stop

ModifyOrder(OrderValue(cnt,VAL_TICKET),OrderValue(cnt,VAL_OPENPRICE),

Bid-Point*TrailingStop,OrderValue(cnt,VAL_TAKEPROFIT),Red);

};

}

else

{

// Check sold trade for close signal

If IsBuying or IsClosing then

{

CloseOrder(OrderValue(cnt,VAL_TICKET),OrderValue(cnt,VAL_LOTS),Ask,3,Violet);

Alert("Turbo_trader-3: Closing SELL order.");

};

// Control trailing stop

If TrailingStop>0 then

{

If (OrderValue(cnt,VAL_OPENPRICE)-Ask)>(Point*TrailingStop) then

{

If OrderValue(cnt,VAL_STOPLOSS)=0 or

OrderValue(cnt,VAL_STOPLOSS)>(Ask+Point*TrailingStop) then

{

ModifyOrder(OrderValue(cnt,VAL_TICKET),OrderValue(cnt,VAL_OPENPRICE),

Ask+Point*TrailingStop,OrderValue(cnt,VAL_TAKEPROFIT),Red);

};

// If there is no open trade

If TotalTrades<1 then

{

// If we have enough money for 1 lot

If FreeMargin<1000 then Exit;

// Check for BUY entry signal

If IsBuying and IsSelling=False and IsClosing=False then

{

// Buy

If StopLoss>0 then

{

RealSL=Ask-StopLoss*Point;

}

If TakeProfit>0 then

{

RealTP=Ask+TakeProfit*Point;

}

SetOrder(OP_BUY,Lots,Ask, Slippage,RealSL,RealTP,RED);

Alert("Turbo_trader-3: Buying");

};

// Check for SELL entry signal

If IsSelling and IsBuying=False and IsClosing=False then

{

// Sell

If StopLoss>0 then

{

RealSL=Bid+StopLoss*Point;

}

If TakeProfit>0 then

{

RealTP=Bid-TakeProfit*Point;

}

SetOrder(OP_SELL,Lots,Bid,Slippage,RealSL,RealTP,RED);

Alert("Turbo_trader-3: Selling");

};

//-------------- Coded by FXFisherman ZeroCode v1.0.2014.30845

Scorpion 2005.07.28 13:04 #1

Hey, what do you want to add Turbo? It seems that you improperly added stoch. and rsi logics.

[Deleted] 2005.07.28 16:41 #2

Here is what i am trying to do

Buy when the wma pass the sma and RSi is above 50 and Stoch is above 50 then buy

Sell when the Wma passes the sma and the rsi is below 50 and the stoch is below 50 then sell

I hope this makes more sence to ya Thanks Scorpion

Thanks

Mike

Hey I ment to ask if ya would you like me to show your progran to other traders on other forums......Let me know

Thanks again

Code for MT-3 RSI trying to make EA Question on making code

Scorpion 2005.07.28 23:00 #3

Check if current RSI level is above 50: RSI (x) Current > 50

For stoch. there are %K and %D lines, so which one do you prefer?

Check if current stoch. %D line is below 50: Stoc (x) %D Current < 50

I left the rest of logics for you, coz it's simple, and you need to learn how to do it by yourself. Ok, now write the logics and I'll confirm.

Adding reversal after trade Beta Testing Asctrend indicator in depth

[Deleted] 2005.07.30 22:25 #4

Thanks Here is the program re written to conferm, I got no error codes finnaly

Thanks Mike

Files:

Turbo_Trader-3.mql 6 kb

Scorpion 2005.07.31 01:30 #5

Hey, brilliant! You got the right logics here

[Deleted] 2005.07.31 01:56 #6

Thanks Scorpion

Mike

[Deleted] 2005.08.02 20:17 #7

Hey i have almost finished with my code and only have on problem to finish it and for some reason i don't understand the logics to close a trade when the wma amd sma cross i mean what to put in ZeroCode I have looked and can't find it in the forum

Thanks Much

Mike

My code also can you make shure I addid the pip filter correctly

//*---------------------------------------------------------------------------------------------------------*\

// This MQL is automatically generated by FXFisherman ZeroCode v1.0.2014.30845 (https://www.mql5.com/en/forum)

// DISCLAIMER:

// FXFisherman ZeroCode is provided free of charge, and, therefore, on an "as is" basis, without warranty

// of any kind, express or implied, including without limitation the warranties that it is free of defects,

// virus free, able to operate on an uninterrupted basis, merchantable, fit for a particular purpose or

// non-infringing. In any case, the author(s) will not be responsible or liable for ANY SPECIAL, INCIDENTAL,

// CONSEQUENTIAL, INDIRECT OR ANY OTHER LOSSES caused by using of this software. USE IT AT YOUR OWN RISK.

//*-----------------------------------PLEASE DO NOT REMOVE THIS HEADER--------------------------------------*/

/*[[ Name := Turbo_Trader1.2

Author := Mike Mckeough

Link := Coded_by_FXFisherman_ZeroCode_@www.fxfisherman.com

Lots := 1

Stop Loss := 0

Take Profit := 499

Trailing Stop := 10

]]*/

defines: Slippage(3);

defines: ;

var: cnt(0),IsBuying(False),IsSelling(False),IsClosing(False),RealTP(0),RealSL(0);

var: rsi3_1(0),rsi3_0(0),stoc4d_1(0),stoc4d_0(0),stoc4k_1(0),stoc4k_0(0),ma1_1(0),ma1_0(0),ma6_1(0),ma6_0(0),ma5_1(0),ma5_0(0),ma2_1(0),ma2_0(0);

// Check for invalid bars and takeprofit

If Bars<200 then Exit;

// Calculate indicators' value

rsi3_1 = iRSI(19,1);

rsi3_0 = iRSI(19,0);

stoc4d_1 = iSTO(4,2,2,MODE_SMA,MODE_SIGNAL,1);

stoc4d_0 = iSTO(4,2,2,MODE_SMA,MODE_SIGNAL,0);

stoc4k_1 = iSTO(4,2,2,MODE_SMA,MODE_MAIN,1);

stoc4k_0 = iSTO(4,2,2,MODE_SMA,MODE_MAIN,0);

ma1_1 = iMAEx(3,MODE_LWMA,0,PRICE_CLOSE,1);

ma1_0 = iMAEx(3,MODE_LWMA,0,PRICE_CLOSE,0);

ma6_1 = iMAEx(4,MODE_SMA,0,PRICE_CLOSE,1);

ma6_0 = iMAEx(4,MODE_SMA,0,PRICE_CLOSE,0);

ma5_1 = iMAEx(5,MODE_LWMA,0,PRICE_CLOSE,1);

ma5_0 = iMAEx(5,MODE_LWMA,0,PRICE_CLOSE,0);

ma2_1 = iMAEx(3,MODE_SMA,0,PRICE_CLOSE,1);

ma2_0 = iMAEx(3,MODE_SMA,0,PRICE_CLOSE,0);

// Note the bid price at crossover point

defines: FilterPips(0.0003);

var: CrossBid(0),IsBuyingBak(False),IsSellingBak(False) ;

// Check for BUY, SELL, and CLOSE signal

IsBuying = (ma1_1 <= ma2_1)

and (ma1_0 > ma2_0)

and (rsi3_0 > 60)

and (stoc4d_0 > 50);

IsSelling = (ma1_1 >= ma2_1)

and (ma1_0 < ma2_0)

and (rsi3_0 < 45)

and (stoc4d_0 < 63);

// Closing Trade On Cross On WMA SMA

IsClosing = (ma5_1 >= ma6_1)

(ma5_1 <= ma6_1)

);

// Check price filter

if (IsBuying and not IsBuyingBak) or (IsSelling and Not IsSellingBak ) then {

CrossBid = pricebid ;

}

IsBuyingBak = IsBuying;

IsSellingBak = IsSelling;

IsBuying = IsBuying and (PriceBid >= CrossBid + FilterPips);

IsSelling = IsSelling and (PriceBid <= CrossBid - FilterPips);

// Control open trades

for cnt=1 to TotalTrades

{

// Control only market trades not entry order

if OrderValue(cnt,VAL_TYPE)<=OP_SELL and

OrderValue(cnt,VAL_SYMBOL)=Symbol then

{

// Check for close signal for bought trade

If OrderValue(cnt,VAL_TYPE)=OP_BUY then

{

If IsSelling or IsClosing then

{

// Close bought trade

CloseOrder(OrderValue(cnt,VAL_TICKET),OrderValue(cnt,VAL_LOTS),Bid,3,Violet);

Alert("Turbo_Trader1.2: Closing BUY order.");

};

// Check trailing stop

If TrailingStop>0 then

{

If (Bid-OrderValue(cnt,VAL_OPENPRICE))>(Point*TrailingStop) then

{

If OrderValue(cnt,VAL_STOPLOSS)<(Bid-Point*TrailingStop) then

{

// Modify trailing stop

ModifyOrder(OrderValue(cnt,VAL_TICKET),OrderValue(cnt,VAL_OPENPRICE),

Bid-Point*TrailingStop,OrderValue(cnt,VAL_TAKEPROFIT),Red);

};

}

else

{

// Check sold trade for close signal

If IsBuying or IsClosing then

{

CloseOrder(OrderValue(cnt,VAL_TICKET),OrderValue(cnt,VAL_LOTS),Ask,3,Violet);

Alert("Turbo_Trader1.2: Closing SELL order.");

};

// Control trailing stop

If TrailingStop>0 then

{

If (OrderValue(cnt,VAL_OPENPRICE)-Ask)>(Point*TrailingStop) then

{

If OrderValue(cnt,VAL_STOPLOSS)=0 or

OrderValue(cnt,VAL_STOPLOSS)>(Ask+Point*TrailingStop) then

{

ModifyOrder(OrderValue(cnt,VAL_TICKET),OrderValue(cnt,VAL_OPENPRICE),

Ask+Point*TrailingStop,OrderValue(cnt,VAL_TAKEPROFIT),Red);

};

// If there is no open trade

If TotalTrades<1 then

{

// If we have enough money for 1 lot

If FreeMargin<1000 then Exit;

// Check for BUY entry signal

If IsBuying and IsSelling=False and IsClosing=False then

{

// Buy

If StopLoss>0 then

{

RealSL=Ask-StopLoss*Point;

}

If TakeProfit>0 then

{

RealTP=Ask+TakeProfit*Point;

}

SetOrder(OP_BUY,Lots,Ask, Slippage,RealSL,RealTP,RED);

Alert("Turbo_Trader1.2: Buying");

};

// Check for SELL entry signal

If IsSelling and IsBuying=False and IsClosing=False then

{

// Sell

If StopLoss>0 then

{

RealSL=Bid+StopLoss*Point;

}

If TakeProfit>0 then

{

RealTP=Bid-TakeProfit*Point;

}

SetOrder(OP_SELL,Lots,Bid,Slippage,RealSL,RealTP,RED);

Alert("Turbo_Trader1.2: Selling");

};

//-------------- Coded by FXFisherman ZeroCode v1.0.2014.30845

Adding reversal after trade Re Reversal in MT-3 Code for MT-3 RSI

[Deleted] 2005.08.03 19:40 #8

Oh I mean't to mention that when I addid my code here I didn't copy the header Just to save room......Don't worry when I go live and give the code away I WILL have your header on it.....

Just Wanted to Let ya know....

TurboTrader

[Archive c 17.03.2008] Humour How do I add Questions from Beginners MQL5

Scorpion 2005.08.04 01:28 #9

IsClosing = (ma5_1 >= ma6_1)

(ma5_1 <= ma6_1)

Two MAs crosses up or down:

AND MA (1) Previous <= MA (2) Previous

AND MA (1) Current > MA (2) Current

OR MA (1) Previous >= MA (2) Previous

AND MA (1) Current < MA (2) Current

*Note: replace (1) and (2) with yours.

New comment