• 概述
  • 评论 (8)
  • 评论 (4)
  • 新特性

VirtualTradePad Lite

VirtualTradePad "一键交易面板演示"

VirtualTradePad - 是一款工作于 MetaTrader 5 的控制面板: 买, 卖, 高买, 低买, 低卖, 高卖, 平仓, 删除, 修改, 尾随停止。

VirtualTradePad 赢得 "MQL5 语言实现最佳控制面板" 大赛的 第二名奖励

精简版

此版本的面板对可执行命令有限制 - 仅有 平仓, 删除和开仓命令可用。在演示期结束, 它将显示以下消息: VTP 演示版过期!!!购买完整版。


完整版本的面板可在此购买: http://www.mql5.com/zh/market/product/167。您也可以试试这个 用于 МetaТrader 4 终端的面板

演示版本:

重要功能

  • 当开仓成功, 您将听到一声类似终端动作的声音;
  • 如果出错, 您将听到出错声音;
  • 您不能在小于交易服务器允许的停止范围或是 0 差距内放置挂单;
  • 在 BUY 和 SELL 按钮上显示买盘价和买盘价,并带有方向箭头;
  • 信息格中显示货币对,持仓大小和总利润;
  • 在输入参数中您可以启用/禁用鼠标覆盖按钮时的提示显示, 以及提示语言 - 英语 / 俄语;
  • 关闭按钮关闭应用程序;
  • 最小化/最大化按钮在图表中将面板放大/缩小;
  • 面板可以在图表内移动。要想移动,在面板上部靠近关闭和最小化按钮的地方用鼠标拖拽,移动到期望的位置。

面板由 3 个选卡组成。


VirtualTradePad "持仓样式"

这个部分设计用来通过 BUY 和 SELL 订单交易, 也可使用附加功能, 比如: 止损修改, 止盈修改, 尾随停止, 仓位反转, 平仓。

界面:

  • Lots - 手数管理目标。当按 "+-", 手数会以服务器许可的最小增量递增。手数不能低于服务器许可的最小值;
  • BUY - 开多头仓位 (其上是买盘价);
  • SELL - 开空头仓位 (其上是卖盘价);
  • REVERSE - 持仓反转功能。持仓在 0 距反转;
  • CLOSE - 整体平仓;
  • Takeprofit/Stoploss - 选择持仓的止盈和止损。当按下 "+-", 止盈/止损将递增 1 点。止盈/止损不能低于服务器许可的最小数值。当按下 "+", 止盈数值从零直接跳到服务器许可的最小值。如果止盈/止损 = 0, 它的值显示为红色。如果止盈/止损不等于 0, 它的值显示为绿色;
  • MODIFY - 紧急修改持仓到指定的止盈/止损。同样, 停止位可以清 0 或修改;
  • Trailing stop - 选择尾随停止;
  • ON - 启用尾随停止。针对当前选择货币对启用。按下 OFF 可以禁用。尾随停止级别依照 Stop Loss 参数判断。


VirtualTradePad "订单样式"

这个部分可以用 Buy, Stop, Buy Limit, Sell Stop 和 Sell Limit 交易; 并且它包括附加功能,如止损, 止盈, 订单距离, 订单网格和订单删除。

界面:

  • Distance - 放置挂单的距离点数。对于止盈/止损, 这个数字不能小于服务器许可的最小值;
  • TakeProfit - 订单的止盈最小点数距离;
  • StopLoss - 订单的止损最小点数距离;
  • Lots - 挂单的交易量手数;
  • PLACE Section - 订单放置选项: Buy Stop, Sell Stop, Buy Limit, Sell Limit;
  • DELETE Section - 订单删除选项: Buy Stop, Sell Stop, Buy Limit, Sell Limit;
  • GRIDs - 开单网格数量。如果它大于 1, 则将按照同向、同间距布置网格。这个功能在 MetaTrader 5 里十分有用。还可以在每级附加手数,并将停止位移动到潜在的新位置。换言之, 这是交易量递增的尾随停止。


VirtualTradePad "信号样式"

这个部分用于信息目的。使用 10 个指标和 8 个时间帧分析主要交易策略, 格中绘制信号方向。

图形功能

  • x - 无信号;
  • 上箭头 - 买信号;
  • 下箭头 - 卖信号。


指标和信号清单

移动均线 (MA) (信号 1)

该信号计算两条均线的相对位置,一条周期较小 (快速 MA) ,另一条周期较大 (慢速 MA)。它们的参数可在以下变量中指定:

  • MAFastPeriod 和 MASlowPeriod - 均线周期。
  • MAFastPrice 和 MASlowPrice - 均线计算价格。
  • MAFastShift 和 MASlowShift - 自右偏移。
  • MAFastMethod 和 MASlowMethod - 平均方法: 简单, 指数, 平滑, 线性加权。

买信号在快速均线位于慢速均线之上时出现, 而卖信号在慢速均线位于快速均线之上时出现。"无信号" 状态未使用。


移动均线收敛发散 (MACD) (信号 2)

使用四个变量:

  • MACDFast - 快速 MA 周期
  • MACDSlow - 慢速 MA 周期
  • MACDSignal - 信号 MA 周期
  • MAPrice - MAs 计算价格。

信号很简单: 买 - 主线位于信号线之上, 卖 - 主线在信号线之下。"无信号" 状态未使用。


随机振荡器 (信号 3)

振荡器由两条线构成 - 主线和信号线,根据两线交叉进行交易。所以,信号如下: 买 - 主线高于信号线,卖 - 主线低于信号线。

用户可用参数:

  • StochK - %K 周期。
  • StochD - %D 周期。
  • StochSlowing - 慢速指标。
  • StochPrice - 计算价格。
  • StochMethod - 平均方法。

RSI (信号 4)

指标类似于 CCI 和 DeMarker。离开超买 (RSIHighLevel) 和超卖 (RSILowLevel) 区间被用作一个适当的信号。所以,较少的卖信号对应于下穿高位,而买信号对应于上穿低位。主要状态 - "无信号"。指标周期可以设置在 RSIPeriod 参数,而计算价格在 RSIPrice 参数。


商品通道指数 (CCI) (信号 5)

所有三个信号均被使用,但主状态依然是 "无信号"。较少的交易信号对应于下穿高位 (卖) 和上穿低位 (买)。高位和低位由 CCIHighLevel 和 CCILowLevel 外部参数的值决定。指标计算周期和价格由 CCIPeriod 和 CCIPrice 的值决定。


Williams 百分比范围 (WPR) (信号 6)

该指标类似于 RSI, CCI 和 DeMarker。所以,信号是: 卖 - 下穿超买位 (WPRHighLevel),和买 - 上穿超卖位 (WPRLowLevel)。所有其它情况表示 "无信号" 状态。仅有指标周期参数 (WPRPeriod) 可以在外改变。


布林带 (信号 7)

所有三种类型信号表达: 买 - 之前蜡烛收盘价在低位线之下, 卖 - 之前蜡烛收盘价在高位线之上, "无信号" - 蜡烛收盘价在两线之间。外部变量:

  • BandsPeriod - 指标周期。
  • BandsShift - 自右偏移。
  • BandsDeviation - 背离。
  • BandsPrice - 计算价格。

鳄鱼 (信号 9)

由于指标由三条移动均线构成,它有许多参数:

  • JawPeriod - 下颌周期,蓝线。
  • JawShift - 下颌自右偏移。
  • TeethPeriod - 牙齿周期。
  • TeethShift - 牙齿自右偏移。
  • LipsPeriod - 唇周期。
  • LipsShift - 唇自右偏移。

同样,相同平均方法 (AlligatorMethod) 和计算价格 (AlligatorPrice) 用于所有的线。所有线都有正的自右偏移。它可以从当前柱线读取指标数值,因为它们已经固定且不会被改变。所以,在此情况下信号如下: 买 - 唇线高于牙齿线,而后者高于下颌线; 卖 - 唇线低于牙齿线,而后者低于下颌线。其它情况无信号。


指标参数:

  • 移动均线参数:
    • periodma1=8;
    • periodma2=16;
    • MAmethod=MODE_SMA;
    • MAprice=PRICE_CLOSE;
  • MACD 参数:
    • FastMACD=110;
    • SlowMACD=136;
    • MACDSMA=14;
    • MACDprice=PRICE_LOW;
  • 随机振荡器参数:
    • SOPeriodK=5;
    • SOPeriodD=3;
    • SOslowing=3;
    • SOmethod=MODE_SMA;
    • SOpricefield=STO_LOWHIGH;
  • RSI 参数:
    • RSIPeriod=14;
    • RSIprice=PRICE_CLOSE;
  • CCI 参数:
    • CCIPeriod=14;
    • CCIprice=PRICE_TYPICAL:
  • WPR 参数:
    • WPRPeriod=14;
  • 布林带参数:
    • BBPeriod=20;
    • BBdeviation=2.0;
    • BBprice=PRICE_CLOSE;
  • 鳄鱼参数:
    • ALjawperiod=13;
    • ALteethperiod=8;
    • ALlipsperiod=5;
    • ALmethod=MODE_SMMA;
    • ALprice=PRICE_MEDIAN;
  • Ichimoku Kinko Hyo 参数:
    • IKHtenkansen=9;
    • IKHkijunsen=26;
    • IKHsenkouspanb=52.
Rodrigo da Silva Boa
7121
2015.12.24 09:07 
 

用户没有留下任何评级信息

Megatrader777
179
2015.01.31 17:57 
 

Пользуюсь такой же на мт4. - одним словом КРУТО!

Malken
54
2014.04.30 09:04 
 

用户没有留下任何评级信息

Vadim Strelkov
7917
2014.04.08 12:40 
 

用户没有留下任何评级信息

Reanimator2
67
2013.07.11 18:25 
 

Интересная панель.

Mamai
101
2013.06.03 10:25 
 

Спасибо за лучшую панель управления для мт5. Все работает четко и быстро. Ваши продукты заслуживают доверия и уважения.

Пожелания: Добавить в панель Чистый безубыток. Также хотелось бы иметь возможность в панельке по сигналам - чтоб выставлялась позиция, например выбрал в вкладке сигналы - пару сигналов - и при получении сигналов - открывалась позиция. Спасибо.

Алексей
14
2012.12.12 13:02   

tralling stop не работает. Нужно дополнительно включать что-то?

Vladislav Andruschenko
98238
2012.06.16 14:37 
 

用户没有留下任何评级信息

版本 17.504 - 2017.05.11
- Fixed the error with the display of fractional numbers on the CLP panel: when entering fractional numbers in the fields Dollars, Percents and Profit trailing

- Added new control buttons to the Positions panel:
LOCK - lock the current positions on the given symbol and magic with 1 cumulative opposite position.
LOSS - close all unprofitable positions
PROFIT - close all profitable positions
版本 17.105 - 2017.01.13
Global update 2017
General changes and improvements:
-Depending on the account currency, added the corresponding icon.
-Improved the function for displaying the trade levels when hovering the panel.
(when hovering the panel, the trade levels of the terminal are disabled, so that the stop levels are not caught when pressing buttons).
-Fixed and improved the function for calculating commission and swap for INFO,CLP.

POSITION tab:
-Changed the tooltip for lots when enabling the DynamicLotStopLoss || DynamicLotAuto options.
-Added new parameter Show_Future_Line - show the lines and description of the future trade.
This function displays the stop loss / take profit lines of the future trade on the chart, statement in points, price and current profit/loss.
It also displays the position opening line with indication of the lot. If you set the lot to be calculated based on stop loss/deposit in the settings, the EA will display the calculated lot.
-TrailingStop now calculates and considers the commission when trailing the position.
INFO tab:
-Fixed display of the cumulative position type in the Info tab.
-Added the value of tick for 1 lot and for cumulative lot of the opened positions to the TickValue line.
-Added the Commission line for displaying the current commission of the open deals.

CLP tab:
-Added parameter Use_Lots_in_CLP_Points for working with the CLP tab - true - the EA will also consider the lot of those positions during calculation of profit points. This option can be useful in trading on a hedging account with different lots.

For example:
opened 2 SELL positions on EURUSD
SELL 0.01 with profit of 20 and 0.2 USD
SELL 0.02 with loss of -12 points -0.24 USD

-If Use_Lots_in_CLP_Points = false the EA will calculate the "net" points.
In this case, the Profit will be: -0.04 USD or 8 points.
As we can see, the position gained profit in points, but it is a loss in USD.

-If Use_Lots_in_CLP_Points = true the EA will calculate points with consideration of lots.
In this case, the profit will be: -0.04 USD or -4 points.
If calculation of profit is in points and the "Include lots in profit calculation" is enabled,
the EA will find the minimum lot of the provided positions and calculate the Points on that basis.
For example:
Minimum position 0.01, 1 "net" point = 1 point,
If a position is opened with a lot of 0.02, then 1 net point = 2 points with consideration of the lot.
If a position is opened with a lot of 0.05, then 1 net point = 5 points with consideration of the lot.

-Added checking of the input values for closing profit or loss:
If the specified profit is lower than the current - system generates a warning and disabled the closure mode.
If the specified loss is greater than the current - system generates a warning and disabled the closure mode.
If set to 0 and user attempts to enable closure - system generates an error.
-Added the AutoCorrect_LevelCLP parameter:
Only negative values can now be entered to the loss field. If user enters +10, the system automatically converts it to -10.
Only positive values can now be entered to the profit field. If user enters -10, the system automatically converts it to +10.

Only a positive value can be entered in the CLP_TralOptions, otherwise the EA generates an error.

ORDERS tab:
-Revised and improved the MAGIC TARGET button.
-When enabled and line is moved, the type of the future position and lot of the future position is displayed.
-When pressing Place, the EA checks the correctness of level placement, and if the levels are specified incorrectly, yjr EA cancels the order placement and points at the incorrect data.
-Added parameter MAGIC_FONTSIZE = size of text on the chart.
-Added check for the "Distance" field, if Distance ==0, the EA cancels the order placement.
-When using the MAGIC TARGET, the Grid and Distance fields can now be modified.


版本 16.930 - 2016.10.05
Updated the algorithm to work on hedge accounts.

Modified the FontSizeText - text size for the operating systems, in which the font size is different from 100% size.

Fixed the function for adjusting the panel position on the chart when switching charts.

Added Rounding parameter:
Without rounding - place stop orders without rounding
To 1 digit - rounding to 1 digit. For example, if Stoploss= 1.23456, the trade will be opened with a stop loss of 1.23450
To 2 digits - rounding to 2 digits. For example, if Stoploss= 1.23456, the trade will be opened with a stop loss of 1.23400

Added the function to save the settings during the terminal reboot, the change in settings inside the panel, when closing the panel on the chart and attaching the panel to the chart.
All variables and data changes made in the panel are now saved when the terminal is restarted.
If you turn off the terminal and turn it on again, all the parameters will be re-loaded from the global variables.

Added the TrailingProfit function to the CLP tab:
Trailing Stop at Closing.
A new function for trailing profits has been implemented on user demand. In this case, the profit is fixed with some correction. As soon as the profit reaches the specified value, the Expert Advisor saves the current profit level and starts trailing the profit.

For example:
If you made settings for closing at the profit of 10 dollars:
Profit $ - positive closing.
Profit $ - value of positive closing.
TrailingProfit- distance from Profit $, which, when reached, triggers trailing profit.
If Profit $ is set to 10 and TrailingProfit is set to 5, the Trailing Stop will be set at 5 dollars. The Trailing Stop will come into play when the Expert Advisor passes the 10 dollar line and starts moving following the profit. The Journal will show entries about the current profit status.
When the total profit falls below the last fixed level, TrailingProfit, the Expert Advisor will perform forced closing of all position.

The function works for all closure types: Every symbol, Current symbol, Separate BUY and SELL direction, Each order separately.
版本 15.991 - 2015.12.17
Modification for the FORTS market
REVERSE button: operation algorithm changed.
Once pressed: first the current position is closed, then the same position is opened with the same lot.
版本 15.966 - 2015.11.09
Версия 15,966 - 2015 11 05
Добавлен параметр Step_TrailingStop для установки шага трейлинг-стопа:
например, Step_TrailingStop=1, тогда через каждый 1 пункт позиция будет модифицироваться.
например, Step_TrailingStop=25, тогда через каждые 25 пунктов позиция будет модифицироваться.

Переработана система сигналов для панели Signals.
В данной вкладке показывается тренд по таймфрейму и индикатору. Ранее сигнал показывался в момент своего срабатывания. Сейчас показывается текущий тренд по каждому индикатору.

Добавлены показатели тренда BUY SELL в процентном соотношении на вкладке Signals

Добавлена возможность скрывать из вкладки Signals отдельные индикаторы и ТФ для расчета процентного соотношения:
Signals_M1=true;
Signals_M5=true;
Signals_M15=true;
Signals_M30=true;
Signals_H1=true;
Signals_H4=true;
Signals_D1=true;
Signals_W1=true;
Signals_BARS=true;
Signals_MA=true;
Signals_MACD=true;
Signals_Stoch=true;
Signals_RSI=true;
Signals_CCI=true;
Signals_WPR=true;
Signals_BB=true;
Signals_ICH=true;
Signals_ALI=true;

Добавлена возможность вывода алерта на экран при использовании вкладки Signals (Внимание: Вкладка Signals при этом должна быть активна.)
Signals_Alert_After_Percent
Если Signals_Alert_After_Percent=50, тогда если показатели выбранных ТФ и индикаторов по BUY или SELL будет выше чем 50 % прозвучит Алерт

Версия 15.915 - 2015.09.16MagicTarget: Исправлена ошибка цены установки ордера при непустом значении поля Distance

Версия 15.908 - 2015.09.14Что нового:
MagicTarget теперь может использоваться без стоплосс и тейкпрофита.
Если установка цены выше текущей - устанавливается байстоп
Если установка цены ниже текущей - устанавливается селлстоп

Новые цветовые параметры:
color MAGIC_ORDER - Цвет линии цены для MAGICTARGET;
color MAGIC_STOPLOSS - Цвет линии стоплосса для MAGICTARGET;
color MAGIC_TAKEPROFIT - Цвет линии тейкпрофитадля MAGICTARGET;
版本 15.521 - 2015.05.22
The new function VIRTUALTRADEPAD MAGIC TARGET

I am glad to present you a new function for trading via my panel in one click — MAGIC TARGET.

MAGIC TARGET is a functional button, a control element of the Orders tab. It is designed for the fast setting of a pending or a market order in the МТ4 and МТ5 platforms.

MAGIC TARGET button automatically defines a placed order type quickly and reliably.

Added parameters for setting a lot by an auto lot from a deposit and a stop loss
extern bool DynamicLotStopLoss=false; // Autolot from StopLoss
extern bool DynamicLotAuto=false; // Autolot from Deposit

Added step parameters for increasing and decreasing the settings (stop loss, take profit, lots, distance)
extern double Step_Lots=0.01;
input int Step_StopLoss=1;
input int Step_TakeProfit=1;
input int Step_Distance=1;
版本 15.116 - 2015.02.05
The version has been completely updated based on the possibilities and functionality of the full version
https://www.mql5.com/en/market/product/167