Пользуюсь полгода. Пробовал на 4-5 брокерах. Работает как часы. Очень доволен. Сделки открываются мгновенно на всех терминалах. Буду продлевать
KopirMT4 Copy trades for MT4
KopirMT4 (CopierMT4) - transaction copier for the MetaTrader 4 terminal, copies (synchronizes, duplicates) transactions from any accounts (copier, copy dealers).
Supports copying: MT4 <-> MT4, MT4 -> MT5 Hedge, MT5 Hedge -> MT4
Attention : For correct operation, at least two terminals on one PC / VPS are required. The first for the account from which it will copy (Server), and the second for the account to which it will copy (Client).
Demo version: https://www.mql5.com/en/blogs/post/736462
Why exactly our product?
- The copier has a high speed and is not dependent on ticks. Copy speed - less than 0.5 sec.
- Transactions are copied with high accuracy, the scalper mode allows you to copy only at the best price.
- Able to increase transaction volumes from Signals
- It does not lose position when a connection is lost or the terminal is restarted.
- Does not load the processor and does not have a large load on the PC or VPS.
- The number of terminals (server \ client) is not limited.
- It does not use a DLL and does not transmit data to the Internet.
- It can work with other advisers (experts) and scripts.
- It works correctly with partial closure, without losing the spread at reopening.
- Able to filter copied transactions by parameters (more in the instructions).
- It supports the “correct” reverse of transactions taking into account the spread and the specified indent.
- Able to copy server trades when they are in plus or in the specified minus.
- It works correctly with cross rates, metals, CFDs, stocks and futures, as well as instruments with prefixes (automatic detection of prefixes).
- Recognizes differences in the name of metals and supports copying on them (XAUUSD <-> GOLD, XAGUSD <-> SILVER and others, you can configure any scheme).
- Allows you to organize any copy scheme from one account or from several. Supports copying MT4 <-> MT5 Hedge, MT4 <-> MT4
- We provide information support for free and are ready to complete the turnkey setup.
- We are ready to listen to the opinions of our customers and implement the necessary functions to make our product even better.
Configuring a copyist
Market Instruction:
https://www.youtube.com/watch?v=-AtFqdJ5Y_s&list=PLltlMLQ7OLeKH3OAmNfDARYQsBYEx9aWY
Setup on the master account (server)
- Install the purchased product on any schedule in one copy. Leave the default settings.
- Allow the adviser to trade in the settings and enable the Auto-trade button in the terminal.
Client setup
- Install the purchased product on any schedule in one copy.
- Mode parameter set to Client mode
- Set the server account number (if there are several servers, you can specify them separated by commas) in the List of server accounts field
- Set the lot multiplier Use lot multiplicator , the default is 1 to copy 1 to 1.
- Allow the adviser to trade in the settings and enable the Auto-trade button in the terminal.
Basic settings
- Mode - the role of this instance of Server - the mode of operation as a master account (transmitting side). Client - operating mode as a client. (the host).
- List of server accounts - a list of account numbers, separated by commas, from which we copy.
- Use lot multiplicator - lot multiplier . 1 = 100% of the server lot.
Full list of settings
Vídeo


Great copier with so many settings to use!! It has exactly those things I needed for a big project! It's the best one I found in the market. The developer Alexander is friendly as well! 5 Stars!

It 's a very good product. The author is helpful, and explains every function immediately

Excelent copier EA,lovely!
Support from Alex is also great he have a lot of patience to explain everything.
I recommend this EA.
thank you Alex,regards!

Спасибо.
хороший копир
Александру отдельное спасибо за помощь в настройке эксперта

Купил, работает как часики! Подзавис с настройкой, исправили за минуту! Спасибо большое. Ждем версию для работы на разных серверах.

So far so good! I am a customer of ActivTrades PLC and the expert advisor working without problems. The author provides an incredibly good and unique support!
Please keep it up!
Best regards
blu.italia
/////
So weit, so gut! Ich bin Kunde bei ActivTrades PLC und der Expert Advisor arbeitet ohne Probleme. Der Anbieter bietet eine unglaublich gute und einzigartige Unterstützung!
Bitte weiter so!
Viele Grüße
blu.italia

Великолепный продукт, но что главное - автор лично помогает в решении любых проблем с копировщиком и оперативно устраняет любые наблюдаемые ошибки. Лучшего сервиса просто не бывает.
//
Excellent product with the best support there is.

Хорошая работа, от аналогов выгодно отличает очень хороший функционал - возможность фильтровать сделки по магику и крайне полезный режим скальпера.

the best and most affordable
excellent work
knows how to do their job
super super !!!

Fantastic product and support! Only issue I've had was from my own stupidity and Alexandr cleared it up super fast.

Купил-таки. Ну супер!!! Все просто летает! В реале на 11 терминалах все открывается и закрывается секунда в секунду. Спасибо! Отличный продукт!!!
Долгое время пользовался бесплатными версиями всевозможных копировальщиков, какие можно найти в интернете, однако ни один из них, не решался запустить на реал. Все они "геморройные".
Всё таки приобрёл эту, предварительно тестировал "лайт" версию на демо.
Работу этого советника можно сравнить с работой швейцарского часового механизма, цена символическая, плюс тех.поддержка.
Александру СПАСИБО.

I just want to share my experience of using KOPRI MT4 copier. I think Alexandr (author) is simply superb and provided excellent support to me while installing the KOPIR M T4. The copier worked perfectly and it is amazing product. Thanks Alexandr for brining out this nice product. It’s really quiet useful to traders who want to increase their deal volume. It is indeed a great product and the author is very much helpful.
As a private trader and manager of customer's account, I rely heavily on this EA. Before using it, I had to manually enter the same trade several times (in several accounts). Now, I only configure the proper risk to each account and voalá!. Higly reccomended.

Work as desired. Great product and great support we have here! Thanks a lot...

Great application with many options. Author is helpful and updated the ea very quickly.

Отличный продукт. Масса настроек, которыми можно настроить, что угодно! Рекомендую до того, как обращаться к автору с вопросами внимательно прочесть инструкцию http://sovetnikov.net/files/kopirmt4_market.pdf
Всё, что можно придумать для копира есть в настройках. В свою очередь техническая поддержка, тоже на уровне, несмотря на очевидную глупость вопросов, общение не прерывают, поддержку оказывают ;-)))

Советник использую больше года. Были разные нюансы, но в основном свои функции выполняет и приносит прибыль. Я доволен и рекомендую всем.
Автору респект за оперативную поддержку.
I bought this Product 2months ago, and it is working perfectly with me,,, what is important, is the great support Author is proving :)

Great product with many customization possibilities. Perfect when you want to trade on multiple accounts even with different balances.

Very good product. I have contacted the guy through Skype to help me for some configuration settings and replied very fast. Great job!

Отличный копировщик. Работает как часы. Быстрый, малое время задержки. Лучший из тех, что я использовал ранее.

Продукт работает отлично и выполняет все заявленные задачи с минимальной задержкой. Погрешность исполнения при копировании "по тикам" в среднем составляет 1 пункт пятизнака. Поддержка мгновенная! Демократичная цена, если не сказать больше. Однозначно 5 звезд!


Шикарно. Работает. У меня не сильно замороченная торговля.Нужно только копирование и мультипликатор лота для соблюдения ММ. Автору спасибо, респект!

It 's a nice product.
The author is helpful, quick respond and Support from Alex is also great he have a lot of patience to explain everything.
I recommend this EA.

This open random forex pair for random lot anytime. I loss 2000usd for 5min. Shit

it is a quite good product.
The support i nice too. Thanks
4 stars because I bought the product at 20$ and the price went down to 10$ the day after.
Быстро, корректно. Хороший продукт. Автор не отсылает на инструкции, а дает четкие рекомендации. Спасибо

I have been using it for a long time now. No problems whatsoever. Just works like it is supposed to.

Очень хороший копировальщик. Прост в обращении и настройках. Задержка минимальная. Спасибо автору за проделанную работу. Рекомендую всем кто ищет подобный продукт.

"The number of terminals (server\client) is not limited."
I can't get the install to work from MQL5, yet the seller states this above and won't give me the direct download to upload to my broker files.

Ein sehr guter Kopierer, funktioniert ohne Probleme und es hat die Einstellmöglichkeiten die ich brauche.


Замечательный копировщик. Работает как часы. Оправдал свою стоимость многократно.

It is so user friendly that it can be easily set up for basic operation without much reference to the instructions. It also has a lot of functions and they can be further explored by watching the video made by the author. A perfect piece of work. Thanks Alex.

Plenty of features and it would be my favorite EA if Client doesn't use so much of resources, particularly CPU. My platform is useless and freezing all the time when I load Client. If I have more of this EAs on one VPS, entire VPS is useless.

It's the easiest to use and full functions copy trade EA that I have ever bought and used.


I have been using this EA for 1 month and I am very happy to use it, because there is no difference between Master and Slave, I still have a problem. I want to copy Transactions in MT5 to MT4 and vice versa. How can this EA function for MT4 and MT5

If there are a few open orders on the server account and you start the client account it will not copy all open orders. Although I used timeout=0 and high slippage setting. Author tries to help but it does not really work perfectly.

MQL5 wrote: The number of available activations is set by the seller!
The seller offered unlimited activations on 1 PC! After installing of 3 instances on 1 PC the MQL5 said: all 5!!!!!! activations are done. Unbelievable. I will try to get my money back

Александр, оплатил сразу на Год, копировщика. Продуктом, после трёх месячного использования, доволен. Спасибо за Вашу работу.
Если вы много зарабатываете на Форекс можете купить конечно .......
Ну а если с деньгами туго....
То существует совершенно бесплатный без всяких ограничений от серьезной конторы....
Есть уроки как написать самому с исходными кодами и полным разбором.....
Стоит только поискать ....
Не понимаю автора который просит за него деньги.....

Купил, поставил, все работает. Спасибо! Реально лучший продукт из тех что видел

Fast!!! Executions are perfect. Support is great Alexander is fast to respond and help

Great copier with so many settings to use!! It has exactly those things I needed for a big project! It's the best one I found in the market. The developer Alexander is friendly as well! 5 Stars!

Пользуюсь полгода. Пробовал на 4-5 брокерах. Работает как часы. Очень доволен. Сделки открываются мгновенно на всех терминалах. Буду продлевать


When the copy destination is used as follows Minimum lot 0.1 Minimum step 0.01 in the case of Copy source 0.12 lot Copy destination 0.1 lot I want you to improve it to 0.12 lots.



Dangerous!! The below statement is now correct, this copier now has developed major copying errors leading to Disaster.


Gostei muito, nota 10!!!! recomento esses produtos do Alexandr Gavrilin, a 2 messes de uso nunca de deixou na mão Obrigado pelo seus ótimos produtos..... Recomento a todos aqui do MQL5!!!

- накопительное исправление ошибок связанные с копированием сделок.
- исправление работы таймаута
- совместимость с обновлением 5.36 KopirМТ5
- добавлены новые опции для переоткрытия сделок:
Reopen maximum - максимальное количество переоткрытий (без учета первой позиции).
- исправлен механизм переоткрытия, теперь для переоткрытия автоматически работает режим scalper mode для входа только по заданной цене или лучше. При переоткрытии после первого ордера игнорируется timeout.
- добавлена новая опция для ограничения копирования отложенных ордеров:
timeout (min) for pending orders - тайм аут для копирования отложенных ордеров, 0 - без ограничений
если включено переоткрытие, то данная опция работает для первого ордера, а потом она игнорируется.
- добавлен режим остановки копирования новых сделок Copy mode = Copy new off отключает копирование новых ордеров. Старые продолжает контролировать
- исправлена работа механизма входа с указанного количества ордеров на сервере, для возможности копирования сделок с усреднениями
- удалена функция Duplication
- удалена функция остановки копирования по количеству сделок на сервере
- удалена функция остановки копирования по количеству на клиенте
- добавлена поддержка копирования и частичного закрытия ордеров с объемов до 3 знаков после запятой
- доработано переоткрытие ордеров, если тейк профит стоит уже неправильно, что может инициировать закрытие сделки сразу, такие сделки копироваться не будут.
- исправлен приоритет для кросс таблицы, чтобы можно было применять правила EURUSD=GBPUSD и т.п.
- added support for copying MT4 < - > MT5
- reworked the logic of the autolot, now you can include the ratio of balances, shoulders, currencies, by default, the lot multiplier mode is enabled.
- fixed the logic of tracking drawdown on the account to stop copying
- добавлено игнорирование Timeout, если включено переоткрытие Reopen position
- при первом открытии берет тр и сл исходные если включен режим User can modify orders
- исправление выставления своих тр и сл.
- исправление обновления данных при закрытии на стороне клиента
- добавлен классический трейлинг стоп (trailing stop) и безубыток (bu)
- возвращена настройка частоты опроса по таймеру, по умолчанию 100 мс
- обновлены отладочные сообщения
- исправления обнаруженных проблем
- удалены метки на графике о текущем режиме так как они дулируют сообщение в правом верхнем углу
- добавлен параметр Cross Table , формат ServerSymbol1=ClientSymbol1 можно указать несколько через запятую. Это дополнение к внешнему файлу кросс таблиц kopirmt4_cross.ini
- переименован параметр Dublicator в Duplication
- исправлен механизм таймера, введен резервный механизм на случай сбоя.
- параметр timeout задан по умолчанию 5 минут
- обновлен механизм работы с ордерами, чтобы ускорить с ними работу.
- бесплатная версия будет работать только по AUDUSD так как данная версия предназначена в первую очередь для знакомства с функционалом.
- добавлен трайлинг стоп по % профиту как суммарно по всем копируемым сделкам так и раздельно по каждому из копируемых счетов.
- исправлено закрытие всех сделок по просадке в валюте и %
- несколько мелких улучшений и исправление замеченных ошибок.
- added the options to enable copying TP and SL separately
- fixed copying with consideration of the EURRUB quotes on ruble accounts
- disabled checking the margin for opening limit and pending orders
- Added the "Use leverage accounts" option, which allows ignoring the leverage ratio when the 'Auto lot = true' mode is enabled
- stop copying at the current drawdown, formula is ((Equity/Balance)-1)*100. If the drawdown is lower than or equal to specified, copying is disabled, it is possible to send notifications and force close the positions.
- Removed the possibility to manage another EA AutoTrade Manager (obsolete feature)
- Fixed display of operation mode taking into account current EA state
- Finalized the stop copying mechanism in case equity or margin levels drop; copying shall be resumed once the level is restored.
- Added new mode to stop copying when the margin level (%) drops
- Added sending of notifications by email or push when the margin/equity level drops, noe more than 1 message in 10 minutes
- Redesigned account currency conversion mode during copying, conversion is disabled by default.
- Improved auto comment, added ticket number
- "use currency auto koef" parameter renamed to "use currency accounts"
- New parameters: "alert mail use", "alert push use", "stopout margin level %"
- Added display of the number of positions opened on the server
- In the free version, only copying of EURUSD is available, other pairs are available in paid versions.
- Otstup parameter renamed to Points
- Fixed conversion with regard to the account currency. Currently supported account types include USD,EUR,RUB
- Fixed copying of XAUUSD
- fixed the error with determining the minimum lot
- improved the analysis of partially closed trades
- Scalping mode and indent mode revised, the logics of the entry point limit updated
- Added settings for configuring server requesting frequency
- A new mode allows to activate the server request by a timer or by arrival of ticks to reduce load
- New functions count_client_orders_stop and count_client_all_orders_use to control the number of orders on the client. Once the specified number of open orders is reached, no more new orders will be copied.
- improved sorting out by comments and magic numbers:
filter magic list
supports ability to specify all magic numbers beginning from specified numbers using * (for example, *1234)
Thus, all orders having the magic number beginning from 1234 will be copied
filter comment list
supports ability to strictly match a comment using ! (for example, !EA_Ilan).
Thus, all orders having a specified comment are copied
- Saturday and Sunday added to the time manager
- Custom comments fixed
- Improved support of binary options (type UP / DOWN is only supported)
- Improved entry mode by the number of spreads. If spread is zero, the copier automatically switches to entry accuracy in points.
- Changed value of parameter filter slippage = 5.0 for compatibility with previous versions
- Changed order tracking logics for the following new functions (ATTENTION: prior to update the application, let the Copier close all positions, otherwise they will be lost!)
- Added an option for starting and stopping copying by the number of open instruments
- Fixed an error with minimal lot when copying CFD and Forex instruments
- Changed logics of symbol match tables, the table is of a higher priority. The exact match of instruments (full names like in the terminal) should be specified in the table
- New option no_move_stoploss_and_takeprofit that disables shift for stop loss and take profit if position was entered with a deviation. The function is on by default.
- The default value of the use_currency_koef is set to true
- New option slippage_is_count_spread, when set to true activates mode of accuracy based on the number of spreads and the entry accuracy depends on the spread. The function is on by default.
- The following parameters have been renamed:
list accounts for copy, delimiter (,) = server accounts
default lot = fix lot
filter slippage open price = filter slippage
- enabled copying take profit and stop loss by default
- Changed lot calculation equation: the description in https://www.mql5.com/en/articles/618#example is used in Autolot mode
- Added support for accounts in different currencies: the terminal should receive quotes in EURUSD and USDRUB. EUR, USD and RUB accounts are supported.
- Ratio calculation can be disabled by setting 'currency auto koef' to 'false'. The mode is disabled by default! This is an experimental function.
- Fixed some errors
- Added timeout indication by a fractional number if the deal lifetime is less than 1 minute
- Added automated disabling of stop loss/take profit modification on the client's side if custom stop loss or take profit is enabled and set to zero
- Revised server order tracking algorithm, update timeout (sec) option is no longer required, so it was deleted. Delay parameter is eliminated. It is no longer required.
- Added external control support by means of copying the instrument from EAs and indicators (detailed information will be available in instructions)
- Included support of different currencies; automated correction of a lot will be in the next updates
- Removed deletion of pending order if it triggered before the client's one, which led to omission of entry by pending orders
- timeout parameter default value is 0 again; operational mode selection parameter was renamed in "mode" (default value of this parameter is Server)
Attention: this update is incompatible with previous versions. Close all open positions on clients or wait for their closing before updating!!!
- improved logics of order tracking
- ability to forcedly update добавлена server data, parameter update timeout (sec), the value is set in seconds (the setting is for the server only)
- automatic detection of symbols with prefixes and CFD
- copying of take profit and stop loss of pending orders the way it is done for market orders; the copier does not copy them by default.
Copying is enabled by setting parameters user takeprofit use=false, user stoploss use=false
- automatic comments, adds the number of the account from which trading is copied
- fixes in the operation of exception filters
- 'timeout' parameter is equal to 5 by default (not 0). The parameter now also affects pending orders as well!
- Improved opening limit and stop orders, especially when working with scalpers and news Expert Advisors.
- Copying stops and take levels is disabled by default in order to speed up the work when copying a great amount of orders.
Pending orders do not receive take and stop levels right after they are placed. Instead, the levels are set right after the order is triggered (if the appropriate options are activated).
By default, take and stop levels are virtual.
- Revised changing a stop loss and take profit in order to improve working with scalper trading robots.
- added the parameter for setting the history upload depth for clients. It reduces the load during intraday trading.
history count (days) = 1..N; the parameter uses the number of previous days as its value;
- added Time manager settings allowing users to set the time period when coyping trades is allowed. The time is set for each day of week. The time format allows you to set trading periods, for example, 0-10, 13-17 or 22:10-08:00, 15:00-18:59;
- added support for joint operation with AutoTradeManager utility.
- Fixed data download when changing the settings, while open trades are present.
- Added the new option: close price use = false/true. If enabled (true), a trade is closed only if the price is not worse than the close price at the source. 'otstup' parameter is considered.
Attention: save the settings to file before the update!
- Fixed take profit, stop loss and Open price modification.
- Fixed the default option 'pause for set takeprofit (min) = 0'.
- Changed scalper mode logic. Now, positive 'otstup' is the minimum number of points the server price should move from the Open one before it is allowed to open a trade. If 'otstup' value is negative, the server price should move in the negative direction for the specified distance from the Open price before it is allowed to open a trade.
- Provided smart stop loss and take profit calculation mode: convergence between the server's and client's position prices is considered.
- Improved sleep mode to reduce the processor load.
- Improved the mode of downloading accounts from different servers.
- added ability to copy only the specified direction
copy mode = Long & Short, Long Only, Short Only
- added ability to set custom take profit or stop loss (can be specified separately)
user takeprofit use = false, true
user stoploss use = false, true
- added re-opening trades if a trade has been closed on a client's side
reopen position = false, true
- added ability to set take profit for a trade with delay in minutes
pause for set takeprofit (min) = 0..60
- New functions for filtering trades based on the magic number, comment or symbol.
- improved data update from server accounts
- Updated the mechanism of saving order details and order receipt by clients, load on CPU is reduced to a minimum. Now the copier enters a standby mode when nothing is changed for the orders.
- Added an editable table of tickets (symbol names), if they differ.
Example:
FTSE=#Z
NKD=#NX
DAX=#GX
WT=#EN
XAUUSD=GOLD
XAGUSD=SILVER
For the futures NO NEED to specify month and the last digit of the year (e.g. Z4 (December 2014), the copier will find them automatically)
- Added exclusion function to work in filters with "-" operator. For example, -EURUSD gives command not to copy the EURUSD trades.
Gostei muito, nota 10!!!! recomento esses produtos do Alexandr Gavrilin, a 2 messes de uso nunca de deixou na mão Obrigado pelo seus ótimos produtos..... Recomento a todos aqui do MQL5!!!